Top 114 Rogers Jobs | SimplyHired

Sheet Metal Mechanic/Welder IV
Corvant —Melbourne, FL
- $35.90 - $42.24 an hour
- Full-time
- 6 years
- High school diploma or GED
- Ability to lift 50 pounds
Quick Apply
Sr. Estimator
Corvant —Melbourne, FL
- $135 - $150 a day
- Full-time
- Microsoft Excel
- 8 years
- High school diploma or GED
Quick Apply
Plumber
Corvant —Grapevine, TX
- Full-time
- 5 years
- Mid-level
- High school diploma or GED
Quick Apply
Plumbing Foreman
Corvant —Grapevine, TX
- Full-time
- Construction site
- Basic math
- Mid-level
Quick Apply
Mechanical BIM Technician
Corvant —Douglasville, GA
- Full-time
- Ability to walk for extended periods
- Mid-level
- Office
Quick Apply
Plumbing Superintendent
Corvant —Grapevine, TX
- Weekends as needed
- Construction site
- Basic math
- Mid-level
Quick Apply
HVAC Superintendent
Corvant —Grapevine, TX
- Weekends as needed
- Construction site
- Basic math
- High school diploma or GED
Quick Apply
Commissioning Analyst
Corvant —Covington, GA
- Full-time
- Construction site
- Mid-level
- Travel
Quick Apply
Service Technician
Corvant —Savannah, GA
- 5 years
- High school diploma or GED
- Ability to lift 50 pounds
Quick Apply
Chief Plumbing Estimator
Corvant —Douglasville, GA
- Full-time
- Microsoft Excel
- High school diploma or GED
- Analysis skills
Quick Apply
Startup Technician IV
Corvant —Delray Beach, FL
- Weekends as needed
- Schematics
- High school diploma or GED
- Ability to lift 50 pounds
Quick Apply
Chief Estimator
Corvant —Grapevine, TX
- Full-time
- Microsoft Excel
- High school diploma or GED
- Math
Quick Apply
Plumbing Field Operations Manager
Corvant —Grapevine, TX
- Full-time
- Microsoft Outlook
- Construction site
- Ability to lift 50 pounds
Quick Apply
Commercial Construction Project Manager III
Corvant —Atlanta, GA
- Full-time
- 8 years
- High school diploma or GED
- Ability to lift 50 pounds
Quick Apply
Project Manager
Corvant —Grapevine, TX
- Full-time
- Construction site
- Mid-level
- 3 years
Quick Apply
Plumbing Estimator - Commercial Construction
Corvant —Douglasville, GA
- Full-time
- Mid-level
- High school diploma or GED
- Math
Quick Apply
Service Technician III
Corvant —Boca Raton, FL
- Customer service
- High school diploma or GED
- Ability to lift 50 pounds
Quick Apply
Estimator II
Corvant —Melbourne, FL
- Full-time
- Microsoft Excel
- Mid-level
- High school diploma or GED
Quick Apply
VDC Supervisor
Corvant —Douglasville, GA
- Full-time
- Continuous improvement
- Mentoring
- Organizational skills
Quick Apply
13d
Project Manager
Corvant —Douglasville, GA
- Full-time
- Construction site
- 3 years
- High school diploma or GED
Quick Apply

I want to receive the latest job alert for rogers

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

Explore jobs in more locations

rogers jobs near

Sheet Metal Mechanic/Welder IV

Corvant -
Melbourne, FL

Quick Apply

Job Details

Full-time
$35.90 - $42.24 an hour

Qualifications

Building code compliance
Plumbing building codes

Full Job Description

Description:

Corvant About Us:

At Corvant, we provide specialty HVAC, plumbing, and mechanical services to mission-critical commercial and industrial environments. Our teams support essential facilities across data centers, healthcare, manufacturing, logistics, and education.

We deliver end-to-end solutions across the facility lifecycle, including design, prefabrication, installation, controls integration, and ongoing service. As one of the fastest-growing platforms in our space, we are focused on operational excellence, technical expertise, and building a high-performing team.

We are currently seeking Sheet Metal Mechanic/Welder for our Melbourne prefabrication shop. The Sheet Metal Mechanic/welder will be responsible for fabricating, welding, and assembling HVAC ductwork and related mechanical components for commercial and mission critical projects. The ideal candidate will have experience with sheet metal fabrication equipment, HVAC systems, and welding processes specific to mechanical construction environments.

This position plays a critical role in supporting field operations by ensuring high-quality prefabricated duct and mechanical components are produced safely, accurately, and on schedule.

Requirements:

Job Responsibilities (List is not inclusive)

Determine the right tools and equipment necessary to successfully complete the job.
Must know industry relevant building codes and regulations for the installation and maintenance of commercial plumbing systems.
Measure, cut and bend mechanical material.
Attend all safety meetings.
Follow instruction given by on-site leadership.
Cleaning the shop after the work is completed
Fabricate HVAC duct sections and fittings from sheet metal stock including:
o Rectangular duct
o Round and spiral duct
o Transitions, elbows, and offsets
Read and interpret shop drawings, fabrication details, and welding symbols
Use layout tools to measure, mark, and cut materials accurately
Assemble duct using Pittsburgh seams, cleats, and S & Drive slips
Lay out and fabricate custom fittings to required tolerances for field installation
Maintain airflow direction, gauge requirements, and duct construction standards

Welding Responsibilities

Perform MIG (GMAW), TIG (GTAW), and Stick (SMAW) welding as required
Weld and fabricate:

o Sheet metal ductwork and enclosures

o Structural supports and equipment frames

o Mechanical and HVAC support systems

o Chiller, boiler, and hydronic piping components as applicable

Produce quality welds on carbon steel, stainless steel, galvanized steel, and aluminum
Perform overhead (4G) groove welds in accordance with AWS D9.1 standards
Ensure airtight and pressure-rated welds where required
Follow proper procedures for handling pressurized systems and HVAC components

Equipment Operation

Operate fabrication and welding equipment including:

Press brakes
Shears
Rollers
Plasma tables/cutters
Lockformers
Notchers
Spot welders
Hand seamers and fabrication tools

Safety & Production

Follow OSHA safety standards and all Corvant safety procedures
Wear required PPE including gloves, hearing protection, and steel toe boots
Maintain clean and organized work areas
Coordinate with shop foremen and production teams to meet fabrication schedules and delivery deadlines
Work efficiently in a fast-paced production environment while maintaining quality standards

________________________________________

Qualifications

6+ years of sheet metal fabrication and welding experience in HVAC or mechanical construction environments preferred
Experience fabricating commercial or industrial HVAC duct systems
Proficient in MIG, TIG, and Stick welding processes
Ability to read and interpret blueprints, fabrication drawings, and isometric layouts
Familiarity with AWS welding standards, including AWS D9.1
Experience working with carbon steel, galvanized steel, stainless steel, and aluminum
Knowledge of HVAC systems, duct standards, and mechanical construction practices
Strong attention to detail and ability to maintain tight tolerances
Welding certifications preferred but not required

________________________________________

Preferred Certifications

AWS Welding Certification (D9.1, D1.1, D1.3, or equivalent)
OSHA 10 or OSHA 30
Forklift certification preferred

________________________________________

Work Environment

Indoor prefabrication shop environment
Exposure to welding fumes, loud equipment, and moving machinery
Fast-paced production schedules with precision fabrication requirements
Frequent standing, bending, lifting, and repetitive motions
Regularly required to stoop, kneel, bend, crouch and lift up to 50 pounds.

Education and Experience

High school diploma or GED equivalent
OSHA 10 Certification required.

Corvant is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees, fostering growth and opportunity regardless of race, color, religion, gender, gender identity, sexual orientation, national origin, disability, veteran status, or any other protected status.

FLAOPS

Quick Apply

Refine Your Search

rogers jobs

Sheet Metal Mechanic/Welder IV

Sr. Estimator

Plumber

Plumbing Foreman

Mechanical BIM Technician

Plumbing Superintendent

HVAC Superintendent

Commissioning Analyst

Service Technician

Chief Plumbing Estimator

Startup Technician IV

Chief Estimator

Plumbing Field Operations Manager

Commercial Construction Project Manager III

Project Manager

Plumbing Estimator - Commercial Construction

Service Technician III

Estimator II

VDC Supervisor

Project Manager

I want to receive the latest job alert for rogers

Explore jobs in more locations

Job Seeker Tools

Employer Tools

Browse

Stay Connected