Top 28 Applications Engineer Venting Jobs

Commercial Boiler/HVAC Field Service Technician
TES Recruiting —Duluth, GA
- $64,000 - $74,000 a year
- Full-time
- Background check
- Up to 50% travel
- Mid-level
- Health insurance
- 401(k)
Quick Apply
2d
Manufacturing Engineer – PEEK Injection Molding
Odin Heavy Industries —Bryan, TX
- $85,000 - $90,000 a year
- Overtime
- Computer literacy
- English
- Mid-level
- Health savings account
- Health insurance
Quick Apply
Tooling Engineer
HRU Tech —Williamsburg, MI
- $85,000 - $100,000 a year
- 5 years
- Analysis skills
- Organizational skills
Quick Apply
9d
Facilities Engineer, Mechanical (Starlink)
SpaceX —Bastrop, TX
- Extended hours
- Hybrid work
- Construction site
- Mid-level
- Travel
Engineer II
Smith & Wesson Brands, Inc —Maryville, TN
- Microsoft Excel
- English
- Office
- Profit sharing
- Employee stock purchase plan
Mechanical Engineer, Infrastructure
SpaceX —Bastrop, TX
- Extended hours
- Hybrid work
- Construction site
- Mid-level
- 3 years
Equipment Reliability Engineer (Starlink/Akoustis)
SpaceX —Canandaigua, NY
- $85,000 - $130,000 a year
- Extended hours
- Management
- Mid-level
- Forklift
- Paid parental leave
- Employee stock purchase plan
MEP/Construction Engineer
SpaceX —Bastrop, TX
- Extended hours
- Hybrid work
- Construction site
- Mid-level
- 3 years
Sr. Tooling Design Engineer, Investment Casting
SpaceX —Bastrop, TX
- Extended hours
- 5 years
- Continuous improvement
- Travel
Fuel Systems Engineer (X-BAT)
SHIELD AI —Dallas, TX
- $142,318 - $213,476 a year
- Full-time
- Schematics
- Bachelor of Science
- Mid-level
Project Engineer
Sumitomo Bakelite North America —Manchester, CT
- Background check
- 5 years
- Engineering
Blow Molding Process Development Engineer
Thermo Fisher Scientific —Rochester, NY
- $107,000 - $179,000 a year
- Full-time
- 7 years
- Office
- Master's degree
- Commuter assistance
- Paid parental leave
Manufacturing Engineer
Pace Industries —Maple Lake, MN
- Full-time
- 3 years
- Analysis skills
- Senior level
Fire Protection) Engineer I/II/III (RICHMOND, VA, US, 23219)
Dominion Energy —Richmond, VA
- $71,400 - $92,700 a year
- Engineering
- System design
- Mid-level
- Paid holidays
- Disability insurance
National Commercial Field Specialist
Navien, Inc. —Remote
- $90,000 - $107,000 a year
- Full-time
- Remote
- Microsoft Outlook
- Public speaking
- Presentation skills
- Paid holidays
- Health insurance
Manufacturing Engineer
Laborup —Maryville, TN
- $80,000 - $90,000 a year
- Full-time
- Microsoft Excel
- English
- Research
- Profit sharing
- Paid holidays
Quick Apply
Senior Mechanical Design & Release Engineer, Battery Structures
Rivian —Irvine, CA
- $107,800 - $134,800 a year
- Email
- 5 years
- Bachelor of Science
- Office
- Employee stock purchase plan
- Disability insurance
Propulsion Engineer, Fleet Support (R5005)
SHIELD AI —Dallas, TX
- $110,000 - $170,000 a year
- Full-time
- 6 years
- Analysis skills
- In-person
Plumbing Engineer III
CRB —Emeryville, CA
- $112,000 - $150,000 a year
- Full-time
- Hybrid work
- Background check
- OSHA
- Mentoring
Quick Apply
Mechanical Design Engineer (HVAC/R & Plumbing) - NDBS
Kelso Industries —St. Louis, MO
- Full-time
- Schematics
- 5 years
- System design
- Opportunities for advancement
Quick Apply

I want to receive the latest job alert for Applications Engineer Venting

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

Explore jobs in more locations

Applications Engineer Venting jobs near

Commercial Boiler/HVAC Field Service Technician

TES Recruiting
Duluth, GA

Quick Apply

Job Details

Full-time
$64,000 - $74,000 a year
2 days ago

Benefits

Health insurance
401(k)
Paid time off
Vision insurance
Life insurance

Qualifications

Engineering equipment malfunctions diagnostics
EPA Refrigeration Certification
Electrical schematic reading and interpretation
Driver's License
Troubleshooting electrical systems
Customer relationship management
Commissioning phase involvement
Hand tools
Mechanical troubleshooting

Full Job Description

Boiler Draft System Technician

Our client in Alpharetta, Ga is seeking a hands-on Technical Support Specialist II with mid-level boiler, combustion, electrical, controls, and mechanical troubleshooting experience. This role supports customers, contractors, sales representatives, and internal teams with boiler exhaust, mechanical draft, control, commissioning, warranty, and product performance issues.

Responsibilities:

Provide timely technical support to domestic and international customers, contractors, representatives, and internal personnel.
Troubleshoot boiler exhaust, combustion air, mechanical draft, venting, VFD, pressure control, and electrical control issues by phone, email, video call, and on-site support.
Support installation, startup, commissioning, operation, maintenance, and troubleshooting of company systems.
Interpret field symptoms, wiring conditions, control behavior, fan operation, VFD alarms, pressure readings, and boiler responses to guide practical corrective actions.
Conduct on-site technical support visits as needed to assist with troubleshooting, commissioning, training, inspections, and performance verification.
Assist with warranty evaluation by reviewing customer reports, photos, field data, wiring, operating history, and failure descriptions.
Collaborate with Engineering and R&D on field issue investigations, product improvements, documentation updates, engineering changes, and new product development.
Support the design, wiring verification, build, testing, and troubleshooting of custom electrical control panels.
Prepare wiring diagrams, connection diagrams, field reports, troubleshooting summaries, commissioning reports, and technical recommendations.
Escalate complex issues to Engineering with clear documentation, suspected root cause, and recommended next steps.
Working knowledge of commercial boiler operation, burner sequence of operation, draft requirements, combustion air, venting, safety interlocks, and boiler control logic.
Ability to assist with common boiler room issues such as nuisance lockouts, flame failures, poor draft, blocked vent conditions, pressure switch faults, excessive condensate, corrosion, and improper mechanical draft operation.
Understanding of the relationship between boiler firing rate, exhaust volume, draft pressure, fan speed, vent sizing, combustion air, and pressure-controlled mechanical draft systems.
Ability to communicate effectively with boiler technicians, mechanical contractors, commissioning agents, facility maintenance staff, and engineers.

Qualifications:

Ability to travel up to 50% for field support, commissioning, training, and customer visits.
Valid driver’s license required; valid U.S. passport required or must be obtainable.
Minimum 3 to 5 years of hands-on experience with commercial boilers, HVAC equipment, combustion systems, mechanical draft systems, controls, or industrial/commercial mechanical equipment.
Experience troubleshooting commercial boiler rooms, burner systems, exhaust fans, venting systems, VFDs, pressure controls, electrical control panels, and field wiring strongly preferred.
Read and interpret wiring diagrams, schematics, installation manuals, technical drawings, burner control diagrams, and control panel layouts.
Apply working knowledge of low-voltage and line-voltage control circuits, relays, contactors, transformers, fuses, overloads, terminal blocks, sensors, pressure transducers, VFDs, and control panels.
Use diagnostic tools such as multimeters, clamp meters, manometers, basic hand tools, and other field service instruments.
PLC, Modbus, BACnet, building automation, AutoCAD, DraftSight, CRM, ERP, warranty, or technical support ticketing experience is a plus.
Strong boiler, combustion, mechanical, electrical, and controls troubleshooting ability.
Practical field service mindset with disciplined diagnostic habits and strong technical judgment.
Clear written and verbal communication with customers, contractors, technicians, engineers, and sales representatives.
Ability to document field findings, corrective actions, warranty findings, and product performance concerns clearly and accurately.
Customer-focused attitude with urgency, ownership, professionalism, and the ability to work independently while knowing when to escalate.
Commercial boiler service, HVAC service, burner service, mechanical equipment troubleshooting, or engineered ventilation experience.
Experience with VFD-driven fans, draft control systems, pressure-controlled exhaust systems, boiler exhaust applications, or mechanical draft equipment.
Familiarity with commercial boiler platforms such as Fulton, Lochinvar, Cleaver-Brooks, Aerco, Raypak, Patterson-Kelley, Weil-McLain, or similar systems.
NATE, HVAC Excellence, EPA 608, boiler operator license, burner technician training, manufacturer boiler certifications, or similar credentials are a plus.

Pay: $64,000.00 - $74,000.00 per year

Benefits:

401(k)
Health insurance
Life insurance
Paid time off
Vision insurance

Experience:

commercial boiler troubleshooting: 3 years (Required)
electrical control circuit troubleshooting: 2 years (Required)
reading wiring diagrams and schematics: 3 years (Required)
VFD and motor control troubleshooting: 2 years (Required)
boiler room startup or commissioning: 2 years (Required)

License/Certification:

Drivers License (Preferred)

Willingness to travel:

50% (Required)

Work Location: In person

Quick Apply

Refine Your Search

Applications Engineer Venting jobs

Commercial Boiler/HVAC Field Service Technician

Manufacturing Engineer – PEEK Injection Molding

Tooling Engineer

Facilities Engineer, Mechanical (Starlink)

Engineer II

Mechanical Engineer, Infrastructure

Equipment Reliability Engineer (Starlink/Akoustis)

MEP/Construction Engineer

Sr. Tooling Design Engineer, Investment Casting

Fuel Systems Engineer (X-BAT)

Project Engineer

Blow Molding Process Development Engineer

Manufacturing Engineer

Fire Protection) Engineer I/II/III (RICHMOND, VA, US, 23219)

National Commercial Field Specialist

Manufacturing Engineer

Senior Mechanical Design & Release Engineer, Battery Structures

Propulsion Engineer, Fleet Support (R5005)

Plumbing Engineer III

Mechanical Design Engineer (HVAC/R & Plumbing) - NDBS

I want to receive the latest job alert for Applications Engineer Venting

Explore jobs in more locations

Job Seeker Tools

Employer Tools

Browse

Stay Connected