Top 476722 As Computer Operator Jobs

1st Shift Manufacturing Maintenance Tech
Brunswick Corporation —New York Mills, MN
- $20.10 - $24.00 an hour
- Overtime
- In person
- Carpentry
- Background check
- Up to 50% travel
- Wellness program
- Health savings account
Quick Apply
Mechanical Technician
Martin Energy Group Services LLC —Tipton, MO
- Background check
- Writing skills
- Basic math
Quick Apply
Journeyman Electrician
Joe Jurgielewicz & Son, LTD. —Reading, PA
- Full-time
- Microsoft Outlook
- Ability to walk for extended periods
- 5 years
Quick Apply
Transportation Construction Inspector Supervisor (TCIS)
URBAN ENGINEERS INC —Erie, PA
- $31.05 - $35.50 an hour
- Weekends as needed
- Construction site
- Computer literacy
- Bachelor of Science
- Mileage reimbursement
- Disability insurance
Quick Apply
Bench Jeweler
Maui Divers Jewelry —Honolulu, HI
- From $18 an hour
- Full-time
- Computer literacy
- Mid-level
- Ability to lift 50 pounds
- Health insurance
- Dental insurance
Quick Apply
Track Foreman
Grace Railroad Contractors, Inc. —Pine Bluff, AR
- $46,800 - $52,000 a year
- Full-time
- Background check
- Construction site
- Heavy equipment operation
- Health insurance
- Dental insurance
Quick Apply
Electrical Specialist
Linde Gas US —Taylor, TX
- Full-time
- Background check
- Up to 50% travel
- 5 years
- Health savings account
- Paid holidays
Quick Apply
Electronic Technician [PH]
Schreiber Foods —Monett, MO
- $31.50 - $41.99 an hour
- Overtime
- Oracle
- Mechanic experience
- English
- Health insurance
- Dental insurance
Electrical Specialist
Linde Gas US —Beaumont, TX
- Full-time
- Background check
- Up to 50% travel
- 5 years
- Health savings account
- Paid holidays
Quick Apply
Electromechanical Technician
Western Sugar Cooperative —Scottsbluff, NE
- $30.68 - $45.04 an hour
- Weekends as needed
- 18 years or older
- Schematics
- Mid-level
- Relocation assistance
- Health insurance
Quick Apply
Plant Electrical and Maintenance Mechanic
Confidential-Manufacturing and Distribution —Pooler, GA
- $20 - $30 an hour
- Full-time
- Mechanic experience
- Computer literacy
- Mid-level
- Health insurance
- Dental insurance
Quick Apply
Licensed Electrical Maintenance Technician
Minerals Technologies —Adams, MA
- $35.08 - $47.36 an hour
- 8 hour shift
- 5 years
- English
- Mid-level
- Disability insurance
- Health insurance
Agricultural Road Tech
Virginia Maryland Tractor —Orange, VA
- Full-time
- 5 years
- High school diploma or GED
- Driver's License
- Health insurance
- Dental insurance
Quick Apply
Ag Diesel Service Technician
Delta Harvest Center —Boyle, MS
- $24 - $35 an hour
- Weekends as needed
- Customer service
- Mid-level
- Assembly
- Relocation assistance
- Health insurance
Quick Apply
6d
Welder
Presrite Corporation —Eastlake, OH
- $21.17 - $21.91 an hour
- Full-time
- 5 years
- Computer literacy
- Computer skills
14d
Experienced Ag Field Service Technician
GREENMARK EQUIPMENT LLC —Lagrange, IN
- Overtime
- Mid-level
- High school diploma or GED
- Computer skills
- Paid holidays
- Health insurance
Quick Apply
2nd Shift Wastewater Operator **$1,500 Sign-On Bonus**
Metalor Technologies USA —Attleboro, MA
- $30 - $35 an hour
- Full-time
- Management
- Mid-level
- Forklift
- Health savings account
- AD&D insurance
Quick Apply
Fuel and Propane Service/Delivery Technician OnTime Petroleum & Propane – Gaylord, MN
On Time Petroleum —Gaylord, MN
- $24 - $30 an hour
- Extended hours
- CDL B
- Clean driving record
- Computer literacy
- Paid training
- Health insurance
Quick Apply
Lead Motive Service Tech
Alpine Power Systems —Indianapolis, IN
- Computer literacy
- Mid-level
- Travel
- Health insurance
- 401(k)
Quick Apply
Logistics Utility
Smart Sand Inc —Taylor, WI
- $24 an hour
- Overtime
- High school diploma or GED
- Computer skills
- Entry level
Quick Apply

I want to receive the latest job alert for As Computer Operator

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

Explore jobs in more locations

As Computer Operator jobs near

1st Shift Manufacturing Maintenance Tech

Brunswick Corporation -
New York Mills, MN

Quick Apply

Job Details

Full-time
$20.10 - $24.00 an hour

Benefits

Wellness program
Health savings account
Health insurance
Dental insurance
401(k)
Tuition reimbursement
Paid time off
401(k) 4% Match
Vision insurance
401(k) matching
Employee discount
Life insurance
Referral program
Retirement plan

Qualifications

Forklift Certification
Manufacturing equipment maintenance
CNC programming
Manufacturing plant facilities maintenance experience
Measuring tapes
Electrical equipment repair
Outdoor work experience
Electrical work
Forklift
High school diploma or GED
Manufacturing facility experience
Dimensional measurements
Driving
Blueprint dimension interpretation
PLC programming
HVAC
Lifts and hoists
Blueprint reading
Electrical diagnostics
Purchasing
Motor control equipment
Power tools
Electrical maintenance
Electrical parts
Ladder logic (LD)
Hand tools
CNC machine setup
Manufacturing company experience
Maintenance technician experience
Material handling equipment operation

Full Job Description

Are you looking for an exciting career opportunity in the boating and fishing industry?

Brunswick New York Mills Operations is the innovative manufacturer of Lund and Crestliner Boats and We're Hiring Immediately!

<< Stop by our front office (located at 318 W Gilman St, New York Mills, MN) for a Walk-In Interview, Monday-Thursday from 9am-3pm for all positions! >>

About our 1st Shift Maintenance Technician:

*Core Hours: 5:30am-4pm Monday-Thursday; overtime on Fridays with notice

*Core Pay: $20.10-$24.00/hour (pay dependent upon experience, and ALL benefits kick-in on your 1st day of hire).

Job Description

Innovation is the heart of Brunswick. See how your contributions will help transform vision into reality:

Position Overview:

We are a boat building manufacturer in New York Mills, MN seeking a Maintenance Technician to perform preventive, routine, and troubleshooting maintenance in a large manufacturing facility. Maintenance tasks performed are in a variety of skilled trade areas (fabrication, electrical, plumbing, carpentry, HVAC, tool and die repair, etc.).

At Brunswick, we have passion for our work and a distinct ability to deliver.

Roles and Responsibilities:

Apply high energy, self-motivation, and initiative to learn and be trained on various types of equipment and maintenance techniques, to include resin and spray equipment, HVAC, plumbing, PLCs, VFDs, etc.
Daily job duties will be varied and dynamic, requiring high levels of customer service and attention to detail.
Workload will be tracked via daily schedules and assignments requiring responsibility and accountability for quality and timeliness of completion.
Compliance to safety policies and procedures is required, as well as identifying risks and hazards prior to job completion.
Requires high foot travel and working throughout the facility. Lifting overhead within prescribed safety limitations. Working at heights: ladders, rooftops, booms and lifts, work platforms, etc. Working outside in all possible weather conditions. Overall good physical condition and agility.
Work hours: typically, 4 days per week at 10 hours per day, 5:30 AM to 4:00 PM daily, but times will be adjusted as demands require. Weekend work is scheduled according to workload and as repair needs dictate.

Diversity of thought and experiences is fundamental when imagining the unimaginable. Certain skillsets/experiences are necessary; however, others can be developed along the way.

Required and Preferred Qualifications:

Two-year technical degree or equivalent
A minimum of 3-5 years facility maintenance experience preferred, 1 year required.
Documented work experience in CNC programming and diagnostics; HVAC; electrical and maintenance experience.
Strong mechanical and electrical background and experience, with experience in electrical motor controls and ladder logic programming.
Experience reading blueprints and schematics and building to specifications.
Ability to fabricate and order materials for open work orders and jobs.
Requires one to three years of substantive experience in one or more of the skilled trades areas (mechanical, electrical, fabrication) and high school diploma/GED.
Will be required to be certified in forklift and high lift (genie boom) operations and operate other equipment such as yard tractor, EPJ, articulating lift, pick-up.
Requires ability to use a wide variety of hand tools, powered and manual.
Ability to read measurement devices, including OHM/voltage meters, measuring tapes, calipers, various equipment gauges as required.
Good safety awareness, attitude, and attendance. Self-starter and a team player.
Computer skills preferred.
Knowledge of 5S, Kaizen and LSS a plus.
Physical requirements include working at heights on booms, lifts, and platforms, lifting parts and pieces up to 50 lbs., traveling up and down stairs on a constant basis, sitting, squatting, and bending in various awkward positions for certain lengths of time - including working overhead, traveling in and out of work areas, walking and being on your feet for a majority of the workday, etc.

Working Conditions:

Regularly required to stand (90%), walk, climb, and bend during workday. Exposed to noise, dust, fumes, and odors daily. Physical exertion is required.

The anticipated pay range for this position is $20.10 - $24.00, hourly. The actual base pay offered will vary depending on multiple factors including job-related knowledge/skills, relevant experience, business needs, and geographic location.

At Brunswick, it is not typical for an individual to be hired at or near the top end of the salary range for their role. Compensation decisions are dependent upon the specifics of the candidate’s qualifications and the business context.

This position is eligible to participate in Brunswick's comprehensive and high-quality benefits offerings, including medical, dental, vision, paid vacation, 401k (up to 4% match), Health Savings Account (with company contribution), wellbeing program, product purchase discounts, and much more. Details about our benefits can be found here.

Why Brunswick:

Whatever tomorrow brings, we’ll be at the leading edge. As the clear leader in the marine industry, we're committed to our values and supporting our exceptional people. We offer valuable benefits including a competitive 401(k) plan with company match, health benefits, paid time off, a robust Wellness Program, and much more. In addition, we’re proud of being recognized for making a splash with numerous awards!

About Brunswick Boat Group:

Brunswick Boat Group is home to a diverse portfolio of iconic marine brands, including Bayliner, Boston Whaler, Crestliner, Harris, Heyday, Lowe, Lund, Navan, Princecraft, Protector, Quicksilver, Rayglass, Sea Ray, Spartan, Thunder Jet, and Uttern. Each brand carries a legacy of innovation, craftsmanship, and performance that has shaped the boating industry worldwide.

Across our fiberglass and aluminum manufacturing facilities, our team members are the driving force behind our success. We foster a culture rooted in safety, integrity, continuous improvement, and personal growth. Whether you're building unsinkable legends, pioneering wake sports, or crafting fishing and pontoon boats trusted for generations, you'll be part of a united team committed to delivering exceptional experiences on the water.

Job Type: Full-time

Pay: $20.10 - $24.00 per hour

Benefits:

401(k)
401(k) matching
Dental insurance
Employee discount
Health insurance
Health savings account
Life insurance
Paid time off
Referral program
Retirement plan
Tuition reimbursement
Vision insurance

Experience:

Manufacturing Maintenance Tech: 1 year (Required)

Work Location: In person

Quick Apply

Refine Your Search

As Computer Operator jobs

1st Shift Manufacturing Maintenance Tech

Mechanical Technician

Journeyman Electrician

Transportation Construction Inspector Supervisor (TCIS)

Bench Jeweler

Track Foreman

Electrical Specialist

Electronic Technician [PH]

Electrical Specialist

Electromechanical Technician

Plant Electrical and Maintenance Mechanic

Licensed Electrical Maintenance Technician

Agricultural Road Tech

Ag Diesel Service Technician

Welder

Experienced Ag Field Service Technician

2nd Shift Wastewater Operator $1,500 Sign-On Bonus

Fuel and Propane Service/Delivery Technician OnTime Petroleum & Propane – Gaylord, MN

Lead Motive Service Tech

Logistics Utility

I want to receive the latest job alert for As Computer Operator

Related Searches

Explore jobs in more locations

Job Seeker Tools

Employer Tools

Browse

Stay Connected