Top 1923 Engineer Jobs in Lone Tree, CO

Design Engineer
Garmat USA —Englewood, CO
- $75,000 - $90,000 a year
- Overtime
- Hybrid work
- Microsoft Word
- Mid-level
- Analysis skills
- Health savings account
- Health insurance
Quick Apply
4d
Test Engineer I
Sierra Nevada Corporation —Lone Tree, CO
- $71,338.47 - $98,090.40 a year
- Full-time
- Bachelor of Science
- System design
- Travel
- Health insurance
- Dental insurance
7d
Product Development Engineer I
Zimmer Biomet —Englewood, CO
- $80,000 - $105,000 a year
- Full-time
- Hybrid work
- Mid-level
- Travel
- Leadership
- Wellness program
R&D Engineer I or II - Oxide Ceramics
CoorsTek Inc —Golden, CO
- $82,000 - $115,000 a year
- Full-time
- Math
- Continuous improvement
- In-person
Quick Apply
5d
Director, Mechanical & Electrical Engineering (Mechatronics)
Swisslog Healthcare —Colorado
- $135,000 - $170,000 a year
- 5 years
- Bachelor of Science
- Maintenance
- Health insurance
- Dental insurance
Head End Engineer
Communications Test Design,Inc. —Aurora, CO
- $80,000 - $90,000 a year
- Full-time
- 18 years or older
- Customer service
- 5 years
- Paid holidays
- Disability insurance
Senior Electrical Engineer
LifeSafer —Denver, CO
- $130,000 - $170,000 a year
- Full-time
- Bachelor of Science
- Salesforce
- In-person
- Dental insurance
- 401(k)
14d
Sr. Electrical Engineer
SCRAM Systems —Denver, CO
- $130,000 - $170,000 a year
- Full-time
- Bachelor of Science
- Salesforce
- Senior level
- Health savings account
- Disability insurance
Quick Apply
Process Engineer - Lead
CANUSA EPC —Denver, CO
- $150,000 - $200,000 a year
- Full-time
- Management
- Engineering
- Office
- Health savings account
- Health insurance
Quick Apply
Mechanical Project Engineer (Water & Wastewater Systems)
Triplepoint Environmental —Centennial, CO
- $80,000 - $100,000 a year
- Full-time
- Microsoft Word
- Bachelor of Science
- Mid-level
- 401(k)
Quick Apply
Lead Application Engineer (Water & Wastewater Systems)
Triplepoint Environmental —Centennial, CO
- $110,000 - $140,000 a year
- Full-time
- Engineering
- Office
- 8 years
- 401(k)
Quick Apply
Transmission Line Engineer
Bradsby Group —Centennial, CO
- Hybrid work
- Mid-level
- Office
- 3 years
Quick Apply
7d
Senior Mechanical Engineer
Haynes Mechanical Systems —Denver, CO
- $120,000 - $150,000 a year
- Full-time
- Hybrid work
- Engineering
- Mentoring
- Senior level
- Paid holidays
- Relocation assistance
Quick Apply
Mechanical Engineer - AI Trainer
DataAnnotation —Denver, CO
- From $60 an hour
- Part-time
- Remote
- English
- Mid-level
- Bachelor's degree
Quick Apply
Structural Engineer (Residential)
Felten Group —Englewood, CO
- $55,000 - $85,000 a year
- Full-time
- AutoCAD
- Civil engineering
- CAD
- Health insurance
- Dental insurance
Quick Apply
UTILITY WATER/WASTEWATER ENGINEER
Arapahoe County Water & Wastewater Authority —Centennial, CO
- $73,654 - $96,586 a year
- Full-time
- Construction site
- Office
- Residential
- Paid holidays
- Disability insurance
Quick Apply
5d
Mechanical Designer - AI Trainer
DataAnnotation —Denver, CO
- From $60 an hour
- Part-time
- Remote
- English
- Mid-level
- Bachelor's degree
Quick Apply
Mechanical Design Engineer - AI Trainer
DataAnnotation —Denver, CO
- From $60 an hour
- Part-time
- Remote
- English
- Mid-level
- Bachelor's degree
Quick Apply
Senior Environmental Project Manager
Ayuda Companies —Denver, CO
- $130,000 - $200,000 a year
- Full-time
- Background check
- Engineering
- Travel
- Disability insurance
- Health insurance
Quick Apply
Sr Mass Properties Engineer
Links Technology Solutions, Inc. —Englewood, CO
- $74 an hour
- Contract
- Bachelor of Science
- Engineering
- Databases
Quick Apply

I want to receive the latest job alert for Engineer in Lone Tree, CO

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

Explore jobs in more locations

Engineer jobs near Lone Tree, CO

Test Engineer jobs in Lone Tree, CO

Mechanical Engineer jobs in Centennial, CO

R&D Engineer jobs in Golden, CO

Mechanical Designer jobs in Denver, CO

Mechanical Engineer jobs in Denver, CO

Product Development Engineer jobs in Englewood, CO

Front End Developer jobs in Aurora, CO

Senior Electrical Engineer jobs in Denver, CO

Environmental Project Manager jobs in Denver, CO

Electrical Engineer jobs in Broomfield, CO

No Drug Test Required jobs in Waco, TX

Semiconductor Ate Test Engineer jobs in Austin, TX

Test Engineer jobs in Kansas City, MO

No Drug Test Required jobs in Evansville, IN

Test Engineer jobs in Redmond, WA

Test Engineer jobs in Pennsylvania

Test Engineer jobs in Olympia, WA

Artificial Intelligence Engineer jobs in San Francisco, CA

Structural Engineer jobs in San Diego, CA

Entry Level Software Engineer jobs in Portland, OR

Design Engineer

Garmat USA
Englewood, CO

Quick Apply

Job Details

Full-time
$75,000 - $90,000 a year
4 days ago

Benefits

Health savings account
Health insurance
Dental insurance
401(k)
Flexible spending account
Paid time off
Employee assistance program
Vision insurance
401(k) matching
Life insurance
Retirement plan

Qualifications

Microsoft Word
Mechanical blueprint interpretation
3D modeling software
Spreadsheets
Mechanical assembly drawings
3D modeling for product design
3D modeling
Design of individual components
Mechanical knowledge

Full Job Description

Position Description:

The Design Engineer plays a critical role in the development and continuous improvement of Garmat USA spray booths. This includes 3D modeling, 2D drafting, documentation creation, and bill of materials (BOM) management. The role supports cross-functional collaboration with operations, supply chain, and technical service teams to ensure product quality, manufacturability, and ease of assembly.

General shifts are Monday - Friday, 8:00 am to 5:00 pm, occasionally overtime is required.

Job functions

In order to perform this job successfully, the individual must be able to execute each essential duty satisfactorily.

Included, but not limited to:

Creates drawings in compliance with GARMAT standards that satisfy order requirements.
Quote/Concept drawings
Permit drawings
Layout drawings
Responsible for the engineering and configuration of solutions that satisfy the customer order requirements for all orders that fall within the Standard and Modified categories.
Develops and / or updates 3D models, 2D Prints, BOMs and installation manuals for all products.
Responsible for the quality of the 3D models and 2D engineering prints.
Collaborates with operations to ensure systems are built per customer requirements and standardized assembly processes.
Maintains high quality standards for engineering documentation and drawings.
Updates documentation promptly when component changes occur.
Supports supply chain in sourcing new components.
Trains operations staff on system assembly and testing procedures.
Identifies and implement product and process improvements to enhance build efficiency and maintainability.
Evaluates new production methods to reduce labor content.
Provides technical support for escalated service calls from distributors.
Performs engineering computations, including algebra, geometry, and trigonometry, rapidly and accurately.
Reads and interprets Mechanical single part, assembly and manufacturing drawings in both metric and imperial systems.
Ensures adherence to QC procedures and product standards.
Applies critical thinking to resolve design challenges and improve processes.
Acts with timely and well executed problem resolution.
Performs other related duties as assigned.

Key Interactions

Must have a positive attitude and always maintain a professional decorum in accordance with the employee handbook. Communicates efficiently and effectively with other employees, stake holders, and customers by telephone and in a one-to-one, face-to-face setting.

Strives for a cross functional team working relationship.
Communicates with and mentors others in an effective manner.

Education, Experience, Subject Matter Expertise

BSEE, BSEM or BSME degree in a technical related field required or 2 years of technical design/engineering work experience; or an equivalent combination of education and experience.

Required Qualifications:

Excellent verbal and written communication skills.
Proficient in 2D/3D CAD, designing parts and drafting engineering prints for manufacturing and installation (AutoCAD & Inventor preferred).
Knowledge of Engineering and Manufacturing principles.
Knowledge of Industrial and Mechanical engineering terminology and techniques.
Knowledge of Bill of Materials management (creation, sustainability)
Ability to visualize 2D into 3D and translate into drawing.
Works methodically and is highly organized and detail oriented.
Manages time efficiently. Ability to manage multiple priorities without missing deadlines.
Experienced with Adobe, Microsoft Excel, and Word.
Leads through example.
Strong analytical and problem-solving skills.
Capable of functioning well in a fast-paced and at times stressful environment.

Physical Requirements

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodation may be provided to enable individuals with disabilities to perform the functions.

While performing the duties of this position, the employee is regularly required to talk or hear. The employee frequently is required to use hands or fingers; handle or feel objects, tools, or controls. The employee is occasionally required to stand, walk; sit; and reach with hands and arms. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate.

Closing Statement:

This brief summary is not an all-inclusive description of job duties. Other job duties and responsibilities may also be assigned by the incumbent’s Manager at any time based upon Company need.Garmat is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state, or local law.

Pay: $75,000.00 - $90,000.00 per year

Benefits:

401(k)
401(k) matching
Dental insurance
Employee assistance program
Flexible spending account
Health insurance
Health savings account
Life insurance
Paid time off
Retirement plan
Vision insurance

Work Location: Hybrid remote in Englewood, CO 80112

Quick Apply

Refine Your Search

Engineer jobs in Lone Tree, CO

Design Engineer

Test Engineer I

Product Development Engineer I

R&D Engineer I or II - Oxide Ceramics

Director, Mechanical & Electrical Engineering (Mechatronics)

Head End Engineer

Senior Electrical Engineer

Sr. Electrical Engineer

Process Engineer - Lead

Mechanical Project Engineer (Water & Wastewater Systems)

Lead Application Engineer (Water & Wastewater Systems)

Transmission Line Engineer

Senior Mechanical Engineer

Mechanical Engineer - AI Trainer

Structural Engineer (Residential)

UTILITY WATER/WASTEWATER ENGINEER

Mechanical Designer - AI Trainer

Mechanical Design Engineer - AI Trainer

Senior Environmental Project Manager

Sr Mass Properties Engineer

I want to receive the latest job alert for Engineer in Lone Tree, CO

Related Searches

Explore jobs in more locations

Job Seeker Tools

Employer Tools

Browse

Stay Connected