Top 7028 Instrumentation technician Jobs

Showing results for instrumentation technician jobs

Search instead for jobs

Instrumentation Technician
Instrumentation Technician —Centennial, CO
- $39 - $50 an hour
- Full-time
- Military
- Mid-level
- In-person
- Health savings account
- Relocation assistance
Quick Apply
7d
Electrical Instrumentation and Controls Tech - Level 1
Pixelle Speciality Solutions —Spring Grove, PA
- $42.32 an hour
- Basic math
- Mid-level
- Trade school
Quick Apply
Electrical & Instrumentation Technician
Liberty Personnel Services, Inc, LP87702 —Shelby, NC
- $32 - $40 an hour
- 12 hour shift
- Mid-level
- Organizational skills
- 4 years
- Relocation assistance
Quick Apply
Maintenance Technician Instrumentation Controls
PDS —Aurora, IL
- $40 - $50 an hour
- Weekends as needed
- Military encouraged
- Fair chance
- Senior level
- Commuter assistance
- Paid holidays
Quick Apply
IC&E Technician
Primary Recruiting Services —Avon, WI
- $48 - $56 an hour
- Monday to Friday
- Mid-level
- High school diploma or GED
- Relocation assistance
Quick Apply
3d
Instrumentation Technician
BioKyowa —Cape Girardeau, MO
- $30.93 - $32.89 an hour
- Overtime
- Mid-level
- Math
- 2 years
- Profit sharing
- Health savings account
Quick Apply
Instrumentation & Controls Technician
Lobo Logistics —Midland, TX
- Customer service
- Mid-level
- High school diploma or GED
- Disability insurance
- Health insurance
Quick Apply
Instrumentation Technician
Lockheed Martin Corporation —Littleton, CO
- $37,600 - $66,240 a year
- Full-time
- High school diploma or GED
- In-person
- Entry level
- Paid jury duty
- Paid holidays
Instrumentation/Electrician Technician
Biourja Renewables LLC —Peoria, IL
- $25.32 - $43.47 an hour
- Overtime
- Computer literacy
- Writing skills
- Mid-level
- Paid holidays
- Disability insurance
Quick Apply
Aerospace Instrumentation Technician
CUBRC INC —Oakwood, OH
- $65,000 - $80,000 a year
- Mid-level
- Paid holidays
- Dental insurance
Deepwater I&E Technician
Danos, LLC —Galveston, TX
- High school diploma or GED
- Senior level
Quick Apply
Instrumentation Technician
Associated Electric Cooperative, Inc. —Clifton Hill, MO
- Full-time
- Computer literacy
- Mid-level
- High school diploma or GED
- Paid holidays
- Health insurance
Instrumentation Technician
Turner Industries —Baton Rouge, LA
- From $47 an hour
- Full-time
- Mechanic experience
- Mid-level
- Ability to lift 50 pounds
- AD&D insurance
- Paid holidays
Quick Apply
Instrumentation and Electrical Technician
Ineos Pigments USA —Ashtabula, OH
- 12 hour shift
- 5 years
- Mid-level
- High school diploma or GED
- AD&D insurance
- Disability insurance
Quick Apply
Electrical & Instrumentation Technician
LANXESS Corporation —El Dorado, AR
- Full-time
- Basic math
- English
- Mid-level
- Health insurance
- Retirement plan
13d
Instrumentation Maintenance Technician
Capstone Mining —Miami, AZ
- $39 - $46 an hour
- Day shift
- Background check
- English
- Mid-level
- Paid holidays
- Disability insurance
Quick Apply
IC&E Technician II
Calpine Operating Services Company —Westbrook, ME
- $38.32 - $47.90 an hour
- Email
- Mid-level
- High school diploma or GED
- Driver's License
Quick Apply
Electrical Instrumentation Technician I/II/III - Water Reclamation Department
City of Solon, OH —Solon, OH
- $34.97 - $38.47 an hour
- Overtime
- Mid-level
- High school diploma or GED
- Ability to lift 50 pounds
- Health insurance
- Dental insurance
INSTRUMENTATION/CONTROLS TECHNICIAN
The University of Mississippi —University, MS
- $27.29 - $40.93 an hour
- Full-time
- Background check
- Mid-level
- High school diploma or GED
13d
Instrumentation Technician
MP Materials Corp. —Fort Worth, TX
- Full-time
- 5 years
- US work authorization
- Military encouraged
Quick Apply

I want to receive the latest job alert for instrumentation technician

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

Explore jobs in more locations

instrumentation technician jobs near

Instrument Technician jobs in Baton Rouge, LA

Maintenance Technician jobs in Aurora, IL

Instrument Technician jobs in Littleton, CO

Instrument Technician jobs in El Dorado, AR

Instrument Technician jobs in Pasadena, CA

Instrument Technician jobs in California

Per Diem Pharmacy Technician jobs in New Jersey

Instrument Technician jobs in Luther, OK

Behavior Technician jobs in Fayetteville, AR

Sterile Processing Technician Training jobs in Chicago, IL

Instrument Technician jobs in Rochester, MN

Pharmacy Technician jobs in Worcester, MA

Instrument Sterilization jobs in Philadelphia, PA

Pharmacy Technician jobs in Bronx, NY

Instrument Technician jobs in Fort Liberty, NC

Instrument Technician jobs in Arlington, TX

Instrument Technician jobs in Long Beach, CA

Instrument Technician jobs in Illinois

Patient Care Technician jobs in Flower Mound, TX

Instrument Technician jobs in Ann Arbor, MI

Instrumentation Technician

Instrumentation Technician
Centennial, CO

Quick Apply

Job Details

Full-time
$39 - $50 an hour
7 days ago

Benefits

Health savings account
Relocation assistance
Health insurance
Dental insurance
401(k)
Flexible spending account
Paid time off
Parental leave
Employee assistance program
Vision insurance
401(k) matching
Professional development assistance
Life insurance

Qualifications

LabVIEW
Fabrication
Military
Airframe & Powerplant License
Electrical troubleshooting

Full Job Description

Boom is building Superpower, a first-of-kind industrial gas turbine for AI data centers. It is one of the most instrumentation-intensive programs in energy right now — and none of the data that proves the design works gets collected without the person who installs the sensors, fabricates the harnesses, configures the DAQ, and supports testing/validation of the instrumentation systems. That person is this role.

Not an MRO/Production technician role

Most instrumentation jobs exist inside an established system — LRUs documented, installation procedures approved, calibration standards published. You show up, you follow the procedure, you install to the standard.

This is not that job.

We have engineers designing instrumentation architectures for hardware that has never been built. What we do not have is someone who can sit alongside them, fabricate the harnesses from a wiring diagram, install the sensors on prototype hardware, configure the DAQ system, and push back when a routing won't work as drawn. You are working at the front edge of the program — where the procedure doesn't exist yet and you help write it.

What you'll do

Fabricate, install, and verify wiring harnesses and cable assemblies for engine instrumentation packages — from raw wire through connector termination, continuity check, and build record closeout

Install and bond sensors across all measurement types used in engine and structural testing: pressure transducers, thermocouples and RTDs, strain gauges, accelerometers, load cells, and vibration sensors

Support active test operations — setup, monitoring, troubleshooting, and teardown.

Integrate instrumentation systems — engine health monitoring— per installation drawings.

Perform functional and acceptance tests on installed instrumentation

Troubleshoot anomalies during build and test — document findings, isolate fault sources, and participate in root cause analysis before escalating to engineering

Own your documentation: build records, calibration logs, test data packages, nonconformance reports, and deviation records are part of every task

This job is demanding

You will walk into a program where the instrumentation architecture is still being defined and the wiring diagrams are still being drawn. Sensors won't always fit where they were modeled. Connectors will conflict with structure. Calibration will reveal sensor drift no one anticipated.

Your job is to catch those problems early — before they corrupt test data or delay a test event — and work with engineering to resolve them rather than waiting for a revised drawing.

That requires real hands-on skill, documentation discipline, and the confidence to tell an engineer that the routing won't work before you build it.

You probably have

Hands-on avionics installation, or flight test support experience

Direct experience instrumenting gas turbine, propulsion, or aerospace test articles.

Demonstrated proficiency fabricating wire harnesses and cable assemblies from schematics — not just installing pre-fabricated harnesses

Experience installing and bonding sensors for structural or propulsion test applications

Working knowledge of data acquisition systems: channel configuration, signal conditioning, calibration verification

Disciplined documentation habits and working knowledge of aerospace quality standards (AS9100, MIL-spec awareness)

Experience on experimental, prototype, or R&D programs — not production or steady-state MRO

It would be great if you have

FAA Airframe & Powerplant (A&P) certificate or FCC General Radiotelephone Operator License (GROL)

Military avionics maintenance background — 2A5X4, 15N, AV-8B/F-16/F/A-18 platform experience, or equivalent

Flight test instrumentation experience — strain gauge installation, pitot-static plumbing, onboard data acquisition

NI LabVIEW or IADS/Curtiss-Wright DAQ configuration experience

IPC/WHMA-A-620 or NASA-STD-8739.4 soldering and wire harness certification

Ability to work in both electrical and mechanical domains without hand-holding.

CAD navigation experience — able to open a 3D model and verify sensor location and routing access

Experience supporting test programs where the schedule was real and the pace was unforgiving.

Why Boom

Superpower is the first industrial turbine purpose-built for AI data center loads. The market it is targeting is growing faster than grid infrastructure can serve it. The hardware is novel, the test timeline is aggressive, and the instrumentation that validates it has to be right.

You will be among the first technicians to instrument a Superpower turbine. The calibration records you maintain, the sensors you install, and the anomalies you catch will directly shape whether the design gets validated on schedule — and whether the commercial units that follow it perform as designed.

The engine core is shared with Overture. The skills and instincts you build on Superpower compound across both programs. There is no equivalent role at an established OEM where first-article engine instrumentation is still being figured out in real time.

If instrumenting a turbine that has never existed before — and building the data foundation that proves it works — is the job you have been waiting for, apply.

Compensation

The Base Rate for this position is $39 - $50 per hour. Actual rate will vary based on factors including but not limited to location, experience, and performance. The range listed is just one component of Boom’s total rewards package for employees. Other rewards may include long term incentives/equity, a flexible PTO policy, and many other progressive benefits.

There is no set deadline to apply for this job opportunity. Applications will be accepted on an ongoing basis until the search is no longer active.

ITAR Requirement

To conform to U.S. Government aerospace technology export regulations (ITAR and EAR), applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about ITAR here.

Boom is an equal opportunity employer and we value diversity. All employment is decided on the basis of qualifications, merit and business need.

Want to build a faster future? Come join Boom.

Pay: $39.00 - $50.00 per hour

Benefits:

401(k)
401(k) matching
Dental insurance
Employee assistance program
Flexible spending account
Health insurance
Health savings account
Life insurance
Paid time off
Parental leave
Professional development assistance
Relocation assistance
Vision insurance

Work Location: In person

Quick Apply

Refine Your Search

instrumentation technician jobs

Instrumentation Technician

Electrical Instrumentation and Controls Tech - Level 1

Electrical & Instrumentation Technician

Maintenance Technician Instrumentation Controls

IC&E Technician

Instrumentation Technician

Instrumentation & Controls Technician

Instrumentation Technician

Instrumentation/Electrician Technician

Aerospace Instrumentation Technician

Deepwater I&E Technician

Instrumentation Technician

Instrumentation Technician

Instrumentation and Electrical Technician

Electrical & Instrumentation Technician

Instrumentation Maintenance Technician

IC&E Technician II

Electrical Instrumentation Technician I/II/III - Water Reclamation Department

INSTRUMENTATION/CONTROLS TECHNICIAN

Instrumentation Technician

I want to receive the latest job alert for instrumentation technician

Related Searches

Explore jobs in more locations

Job Seeker Tools

Employer Tools

Browse

Stay Connected