Top 4321 Machinist Level Jobs

CNC Machinist 4 - 5 Axis Mills and Lathe
Crane Aerospace & Electronics —Burbank, CA
- $34.00 - $46.50 an hour
- Overtime
- Background check
- Pass drug screening
- Mid-level
- Paid holidays
- Disability insurance
Experienced CNC Machinist - $2000 Sign-on Bonus
Penn United Technologies, Inc. —Warminster, PA
- $24 - $32 an hour
- Urgently hiring
- High school diploma or GED
- Math
- Manufacturing
- Profit sharing
- Paid holidays
Journey Level Mill Operator/Machinist
Locke Precision —Puyallup, WA
- $25 - $45 an hour
- Full-time
- Mid-level
- US work authorization
- In-person
- Paid holidays
- Health insurance
Quick Apply
4d
CNC Milling Machinist | The Setup Expert
Nelson Numeric —Bloomington, MN
- From $28 an hour
- Full-time
- Background check
- Mid-level
- High school diploma or GED
- Health insurance
- Dental insurance
Quick Apply
ORION Spacecraft Technician Machinist, Senior
ASRC Federal —Merritt Island, FL
- Full-time
- 5 years
- High school diploma or GED
- In-person
- Paid holidays
- Health insurance
Quick Apply
Licensed Engineer
My Maritime Career —Piney Point, MD
- $25 - $50 an hour
- Full-time
- Classroom
- Schematics
- 5 years
- Health insurance
- Dental insurance
Quick Apply
CNC Machinist - Lathe Set-up
ARCH Medical Solutions —Escondido, CA
- $35 - $40 an hour
- 5 years
- Senior level
- Paid time off
Quick Apply
14d
Mechanical Technician II
Association of Universities for Research in Astronomy —Maui, HI
- $32 - $41 an hour
- Weekends as needed
- Computer literacy
- Mid-level
- Forklift
- Paid time off
- Retirement plan
CNC Lathe Machinist (Nights)
American Rheinmetall —Plymouth, MI
- Mid-level
- 3 years
- High school diploma or GED
Quick Apply
CNC Machinist (Mill or Lathe)
Crane Aerospace & Electronics —Elyria, OH
- $35.42 - $37.55 an hour
- Full-time
- Background check
- Pass drug screening
- Mid-level
- Disability insurance
- Health insurance
CNC Machinist Mill
Masterbilt Inc —South Bend, IN
- From $22 an hour
- Full-time
- Mid-level
- Power tools
- In-person
- Health insurance
- Dental insurance
Quick Apply
Quality Inspector (Level III) Aerospace - 2nd shift
Coronado Manufacturing —Sun Valley, CA
- $29 - $37 an hour
- Full-time
- 7 years
- Computer literacy
- Microsoft Office
- Health insurance
- Dental insurance
Quick Apply
11d
CNC Machinist
Colinear Aerospace —Sparta, NJ
- $28 - $37 an hour
- Full-time
- Mid-level
- 3 years
- In-person
- Health insurance
- Dental insurance
Quick Apply
CNC MACHINIST - WEEK & WEEKEND SHIFT OPPORTUNITIES
JJR Engineering and Fabrication —Woodinville, WA
- $25 - $40 an hour
- Full-time
- Mid-level
- In-person
- Health insurance
- Dental insurance
Quick Apply
Manual Machinist II - Tool Maker
Tecomet —Wilmington, MA
- $28 - $38 an hour
- Mid-level
- 3 years
- High school diploma or GED
Quick Apply
Journeyman Level CNC Programmer – Machinist – Set-Up
Diversified Machining & Fabrication —Modesto, CA
- $30 - $40 an hour
- 8 hour shift
- English
- High school diploma or GED
- Ability to lift 50 pounds
- Health insurance
- Dental insurance
Quick Apply
Military to Maritime Trainer-Engine
Lundeberg Maryland Seamanship School —Piney Point, MD
- $25 - $50 an hour
- Part-time
- Classroom
- Military
- Public speaking
- Health insurance
- Dental insurance
Quick Apply
Machinist--Manual and CNC
Alaska Roteq an Impel Company —Wasilla, AK
- Up to $40 an hour
- Overtime
- Background check
- Mid-level
- High school diploma or GED
- Health insurance
- Dental insurance
Quick Apply
11d
Machinist CNC & Manual Lathe I
Consarc —Rancocas, NJ
- $20 - $23 an hour
- Full-time
- 5 years
- Pass drug screening
- Forklift
- Health savings account
- Health insurance
Quick Apply
CNC Swiss Programmer-Day Shift
ARCH Medical Solutions —Minneapolis, MN
- $35 - $45 an hour
- Day shift
- Mid-level
- High school diploma or GED
- Continuous improvement
- AD&D insurance
- Paid holidays
Quick Apply
4d

I want to receive the latest job alert for Machinist Level

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

CNC Machinist 4 - 5 Axis Mills and Lathe

Crane Aerospace & Electronics -
Burbank, CA

Apply Now

Job Details

Full-time
$34.00 - $46.50 an hour

Benefits

Paid holidays
Disability insurance
Health insurance
Dental insurance
Tuition reimbursement
Paid time off
Vision insurance
401(k) matching

Qualifications

Inspection gauge
Tooling
Safety regulations
High school diploma or GED
Dimensional measurements
Microscope proficiency
Continuous improvement
CNC quality inspection
Quality control experience within aerospace industry
Precision measurement in machining
Quality control records management

Full Job Description

Crane Aerospace and Electronics has an exciting opportunity for a 2nd Shift CNC Machinist II or III (Mills and/or Lathe) at our Burbank, CA location.

Second Shift Hours are Monday-Friday, 2:00 PM -10:30 PM. Overtime may adjust start time (e.g., 3:00 PM for extended overtime) and/or extend end time. Flexibility to work overtime and weekends as required.

About Crane:

Crane Aerospace & Electronics supplies critical systems and components to the aerospace and defense markets. You’ll find Crane Aerospace & Electronics in some of the toughest environments: from engines to landing gear; from satellites to medical implants and from missiles to unmanned aerial systems (UAS).

Every 1.2 seconds, product built at our Crane Aerospace & Electronics Burbank facility is stopping aircraft – delivering passengers and military personnel safely to their destination. Home to our Landing & Cabin Systems team, Crane A&E’s brake control systems and premium cabin actuation solutions are flying on tens of thousands of aircraft throughout the world. You’ll join a business with a long track record of engineering excellence, set in the wonderful town of Burbank filled with great community atmosphere, schools, weather and no shortage of entertainment.

Start the next chapter of your career with Crane Aerospace & Electronics!

Job Summary:

The CNC Machinist produces machined parts by setting up and operating a computer numerical control (CNC) machine, maintaining quality and safety standards, keeping records and maintaining equipment and supplies.

Essential Functions:

Understand work orders, blueprints, manufacturing orders, and machining parameters
Validate material used
Maintain specifications; Troubleshoot, detect malfunctions and take appropriate actions; Know when to replace worn tools
Listen to machining operation in order to detect sounds such as those made by dull cutting tools or excessive vibration and compensate for problems
Measure dimensions of finished work pieces to ensure conformance to specifications using precision measuring instruments, templates, fixtures and knowledge of GDT standards
Maintain continuity among shifts by documenting and communicating actions taken thus far as well as any necessary further steps
Any other task assigned by supervisor or management

Non-Essential Functions:

Maintain conscientious work behaviors including work ethic, safety standards, quality, costs, and On-Time Delivery (OTD)

Minimum Qualifications:

Experience: 2+ years of experience machining with CNC Mills and/or Lathe, preferably in aerospace manufacturing.
Experience on 4-5 axis CNC Lathe (Okuma & Harding Lathe experience preferred).
Experience on 4-5 axis CNC Mills (Mazak machine, Fadal, Toyoda experience preferred).
Knowledge: Knowledge of various inspection equipment i.e. micrometers, calipers, and height gages; Knowledge of safety procedures and regulations; Knowledge of Geometric Dimensional Tolerancing; Understanding of cutting tool Geometry; Knowledge of tooling and coordination
Skills/Abilities: Able to work quickly and efficiently through Process Improvement structure; Good verbal and written communication; Strong attention to detail and accurate record keeping
Education/Certification: High School Diploma or equivalent
Eligibility Requirement: This position may require access to Controlled Data or Information. Where the position requires such access only US Persons will be considered. As a US Department of Defense contractor, we are bound by International Traffic in Arms Regulations (ITAR).

Preferred Qualifications:

Experience working with Mazak, Fadal, or Toyoda CNC machines
Experience working with Okuma & Harding machine
Understanding of CNC G Code
Understanding of basic Math, Geometry and Trigonometry
Excellent teamwork skills

Working Conditions:

Working conditions are normal for a manufacturing environment
Manufacturing operations may require the use of safety equipment to include but not limited to: eye safety glasses, gowning, masks, hearing protectors, heel/wrist straps and any other required PPE
May be exposed to unusual environmental conditions such as loud noises, cold temperatures, confined spaces, dust or fumes
Flexible and willing to work overtime if necessary
Standing: 100% *percentage is approximate and may vary depending on work task
Sitting: 0% *percentage is approximate and may vary depending on work task
Lifting (in pounds): up to 30 pounds
Pushing (in pounds): up to 50 pounds
Mental/Visual: use of microscope, computer and blueprints
Workspace: clean bench, measuring table

Top Benefits:

As a team member at Crane Aerospace and Electronics, you’ll enjoy:

o Benefits: Health care, dental, vision, life and disability insurance starting the first day of the month following your start date.

o Time Off: 15 days of paid time off that start accruing your first day at Crane plus 12 paid holidays per year.

o 401k Retirement Plan: 401k plan with company match.

o Education Reimbursement: eligible after 6 months of employment.

You can see a list of our benefits at https://www.craneae.com/company/careers or visit our website at www.CraneAE.com for more information on our company and great opportunities.

We are committed to operational excellence and world class processes. We employ Lean manufacturing techniques to optimize manufacturing efficiency and accuracy on all product lines. Our products are known for their technical strength, proven reliability and overall value.

In our efforts to maintain a safe and drug-free workplace, Crane Aerospace & Electronics requires that candidates complete a satisfactory background check. FAA sensitive positions require employees to participate in a random drug test pool.

Hourly Range: $34.00 to $46.50. Several factors contribute to actual salary, including experience in a similar role or performing comparable job responsibilities, skills, training, and other qualifications. Some roles may be eligible for participation in performance-based bonus programs.

The level of the position will be determined based on the candidate's experience and qualifications, including experience in a similar role or performing comparable job responsibilities.

Second shift openings are eligible for a 10% shift differential. The 10% shift differential will be added to the base pay once training on First shift has been successfully completed and the employee transitions to the Second shift schedule.

#LI-MD1

This description has been designed to indicate the general nature and level of work being performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job.

Crane Company. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, gender, sexual orientation, general identity, national origin, disability or veteran status.

Apply Now

Refine Your Search

Machinist Level jobs

CNC Machinist 4 - 5 Axis Mills and Lathe

Experienced CNC Machinist - $2000 Sign-on Bonus

Journey Level Mill Operator/Machinist

CNC Milling Machinist | The Setup Expert

ORION Spacecraft Technician Machinist, Senior

Licensed Engineer

CNC Machinist - Lathe Set-up

Mechanical Technician II

CNC Lathe Machinist (Nights)

CNC Machinist (Mill or Lathe)

CNC Machinist Mill

Quality Inspector (Level III) Aerospace - 2nd shift

CNC Machinist

CNC MACHINIST - WEEK & WEEKEND SHIFT OPPORTUNITIES

Manual Machinist II - Tool Maker

Journeyman Level CNC Programmer – Machinist – Set-Up

Military to Maritime Trainer-Engine

Machinist--Manual and CNC

Machinist CNC & Manual Lathe I

CNC Swiss Programmer-Day Shift

I want to receive the latest job alert for Machinist Level

Related Searches

Explore jobs in more locations

Job Seeker Tools

Employer Tools

Browse

Stay Connected