Top 43864 Process Control Technician Jobs

Process Mold Technician, Injection Molding, 3rd Shift
DA Inc. —Santa Teresa, NM
- Full-time
- Mid-level
- Forklift
- High school diploma or GED
- Health savings account
- Health insurance
Quick Apply
Service Technician
ROK Mechanical & Refrigeration —Crystal Spring, PA
- $18 - $20 an hour
- Full-time
- Military
- English
- Mid-level
- Health insurance
- Dental insurance
Quick Apply
10d
Grader Maintenance Technician III
Kreher Family Farms —Wolcott, NY
- $27 - $34 an hour
- Full-time
- Mid-level
- 3 years
- High school diploma or GED
- Health insurance
- Dental insurance
Quick Apply
Production Technician
Ventex Corporation —San Jose, CA
- $65,000 - $75,000 a year
- Full-time
- Schematics
- Writing skills
- Basic math
- Health insurance
- Dental insurance
Quick Apply
LSR Process Technician
Beacon MedTech Solutions —Leominster, MA
- $27 - $33 an hour
- Full-time
- OSHA
- 5 years
- Computer literacy
Quick Apply
Metrology Technician
All American Racers —Santa Ana, CA
- $31.25 - $43.27 an hour
- Weekends as needed
- Mid-level
- Office
- 3 years
- Health insurance
- Dental insurance
Quick Apply
13d
Electro Mechanical Technician II
Sheridan —Stevens Point, WI
- $34 - $38 an hour
- Overtime
- Basic math
- English
- Mid-level
Medical Lab Technician - MLT
Associated Physicians, LLP —Madison, WI
- $30 - $33 an hour
- Full-time
- Computer literacy
- Clinic experience
- Mid-level
- Health savings account
- Disability insurance
Quick Apply
Quality Control Technician
HSM ammunition —Stevensville, MT
- From $18 an hour
- Full-time
- Background check
- High school diploma or GED
- Analysis skills
- Health insurance
- 401(k)
Quick Apply
Coating Technician
Teledyne FLIR Defense —Freeport, PA
- Overtime
- Background check
- High school diploma or GED
- In-person
- Paid training
- Health insurance
Quick Apply
CMM Quality Technician
Neosho Trompler Inc. —Hartland, WI
- $20 - $28 an hour
- Full-time
- Microsoft Excel
- 5 years
- Word processing
- Health savings account
- Health insurance
Quick Apply
5d
Foundry Technician
TRS Technologies, Inc. —State College, PA
- $22 - $24 an hour
- Overtime
- Background check
- Microsoft Excel
- English
- Health savings account
- Health insurance
Quick Apply
I&E Technician
Linde Gas US —McIntosh, AL
- Full-time
- Background check
- 5 years
- Mid-level
- Health savings account
- Paid holidays
Quick Apply
Electronic Technician [PH]
Schreiber Foods —Monett, MO
- $31.50 - $41.99 an hour
- Overtime
- Oracle
- Mechanic experience
- English
- Health insurance
- Dental insurance
Automation Maintenance Technician – Jenbacher Engines
INNIO —Waukesha, WI
- Monday to Friday
- Mid-level
- Microsoft Office
- Continuous improvement
Quick Apply
Operations & Service Technician
Aquarius Technologies LLC —Benicia, CA
- $35 - $45 an hour
- Full-time
- Background check
- 5 years
- Pass drug screening
- Health savings account
- Health insurance
Quick Apply
Feed Mill Maintenance Technician
Smithfield Foods —Lucerne, MO
- Full-time
- Mid-level
- Ability to lift 50 pounds
- In-person
- Relocation assistance
Electromechanical Technician - 2nd Shift
Mayville Engineering Co Inc —Mayville, WI
- 8 hour shift
- Ability to walk for extended periods
- 5 years
- Ability to lift 50 pounds
Quick Apply
Maintenance Technician - Rotating DuPont Schedule
Avery Dennison —Painesville, OH
- Full-time
- Background check
- Pass drug screening
- Mid-level
- Paid holidays
- Health insurance
Quick Apply
Instrumentation & Electrical Technician
POET —Bingham Lake, MN
- $30 - $40 an hour
- Weekends as needed
- Pass drug screening
- Mid-level
- Ability to lift 50 pounds
- Profit sharing
- Wellness program
Quick Apply

I want to receive the latest job alert for Process Control Technician

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

Explore jobs in more locations

Process Control Technician jobs near

Maintenance Technician jobs in Painesville, OH

Production Technician jobs in San Jose, CA

Medical Laboratory Technician jobs in Madison, WI

Process Technician jobs in Leominster, MA

Automation Engineer jobs in Waukesha, WI

Service Technician jobs in Concord, CA

Service Technician jobs in Salem, OR

Airport Wheelchair Service jobs in Chicago, IL

Fiber Optic Technician jobs in Virginia

Customer Service Weekend Remote jobs in Chicago, IL

Pharmacy Technician jobs in Irving, TX

Service Technician jobs in Murfreesboro, TN

Service Technician jobs in Tonawanda, NY

Maintenance Technician jobs in West Orange, NJ

Electronic Technician jobs in Cleveland, OH

Entry Level Maintenance jobs in Philadelphia, PA

Maintenance Director jobs in Houston, TX

Maintenance Technician jobs in Toledo, OH

Maintenance Technician jobs in Rochester, MN

Maintenance Technician jobs in Anaheim, CA

Process Mold Technician, Injection Molding, 3rd Shift

DA Inc.
Santa Teresa, NM

Quick Apply

Job Details

Full-time

Benefits

Health savings account
Health insurance
Dental insurance
401(k)
Tuition reimbursement
Paid time off
401(k) 4% Match
Parental leave
Employee assistance program
Vision insurance
401(k) matching
Employee discount
403(b)
Professional development assistance
Life insurance
Referral program
Retirement plan

Qualifications

Forklift Certification
Troubleshooting schematics
Machine setup
Plastics production experience
Defect resolution root cause analysis
Crane Certification
Machine operation
Statistical Process Control
Overhead Crane Certification
Injection (injection molding)
Corrective and preventive actions (CAPA)
Forklift
Dimensional measurements
Crane hoisting operations
Measuring instruments
Injection molding
Molding process implementation
Manufacturing
Root cause analysis
Plastics injection molding
Mechanical knowledge
Failure analysis

Full Job Description

Job Summary:
COMPANY CONFORMANCE STATEMENTS

Full Time, 3rd Shift, Monday-Friday

In the performance of their respective tasks and duties all associates are expected to conform to the following:

Adhere to all environmental and safety policies/procedures and immediately report any violations. Perform all work with the mindset of safety first.
Perform quality work within deadlines with or without direct supervision.
Interact professionally with other associates, customers and suppliers.
Work effectively as a team contributor on all assignments.
Work independently while understanding the necessity for communication and coordinating work efforts with other associates and organizations.

1. GENERAL FUNCTION

Support shift as needed to meet production schedule, quality, safety and organization by monitoring machine efficiency, assist with mold, color or equipment changes and take necessary action to correct potential and existing roadblocks.

2. JOB REQUIREMENTS

* Essential *

A. Responsible for the following in assigned section:

i. Safety

ii. Quality

iii. Production

iv. Housekeeping

v. Organization

B. Responsible to maintain existing production processes by confirming all conditions on active presses daily.

i. Verified daily by audit sheet requirements.

ii. Confirm part quality by required visual checks.

iii. Confirm Sprue pickers/robots are working properly and not carrying parts.

iv. Verify parts are transferring correctly to packaging station and not in machine panels.

v. Perform daily preventative maintenance on equipment as required.

C. Responsible to ensure the start up of all molds / dies into production after tool set.

i. Responsible to confirm setup activities and report issues to Supervisor.

ii. Responsible to start production based on work instructions.

iii. Responsible to complete ICIR documentation, Startup documentation as prescribed by part specific information.

iv. Responsible for EOR operations of production jobs as indicated by work instructions.

D. Responsible for any changes made on processes within their areas.

E. Audit the workstations for proper documentation. (Report daily.)

F. Assist in robot settings in regards to times and positions. Notifies maintenance in the event that a speed control requires adjusting.

G. Assist in troubleshooting part quality issues and determines root cause for defects. Improves part quality and performance by implementing countermeasures based on investigation results. Ensures that all changes are confirmed and approved by required staff prior to production.

H. Perform diagnostic checks of machinery as needed to ensure equipment is capable of process requirements. Notifies maintenance if repairs are needed.

I. Issue and completes MSS sheets, after analyzing issues to determine tooling as cause and to confirm repair after completed. This process must be adhered to as indicated in work instructions.

J. Assist in troubleshooting and repairing day to day molding / extruder problems such as cleaning molds / dies, replacing SSD and load cell cables, repairing machine chutes, installing mold curtains, etc.

K. Assist in troubleshooting machine related problems with Molding Shift Supervisor .

i. This includes Short shot detection systems, robot issues, or any other equipment failure that would contribute to Production hindrance or Quality concern.

L. Confirm condition change records on active presses daily and submit updated condition sheets as needed to maintain effective processes.

i. Prior to updating the condition sheet, Mold Tech is responsible to investigate cause and effect of the change to ensure part quality is maintained or improved.

ii. Root cause analysis must be done prior to any changes.

M. Assist the Supervisor in improvement projects as needed to improve production efficiency and quality.

i. Responsible to participate in Continuous Improvement activities.

ii. Responsible to participate in Corrective Action activities.

iii. Responsible to participate in Kaizen activities.

* Nonessential *

N. Supervisory skills might be required when supervisor is not present.

O. Assign Mold changes and color changes to supporting personnel and/or assist Mold Technicians B with mold setting and related activities when necessary.

i. Responsible to perform color changes as needed and start the machine into production following correct guidelines.

ii. Responsible to report setup errors to Supervisor to allow proper containment and corrective activities.

P. Assist Production staff as needed to maintain production during times of manpower shortages. This may include any position required within the molding department.

3. QUALIFICATIONS

A. 2 years Injection Molding experience.

B. 2 year Injection Molding processing experience.

C. Must have a high level of material knowledge.

D. SPC knowledge.

E. RJG, SSD or advanced molding systems (preferred).

F. High School Diploma or equivalent.

G. Must have adequate test scores on: Math, Graphic, Thurstone, and Mechanical tests.

H. Must be capable and certified in crane and forklift operation.

I. Good root cause analysis skills.

J. Able to perform mold setup functions.

K. Must be able to perform scanning activities.

M. Capable to use basic measuring tools such as Calipers and Micrometers.

N. Have basic mechanical, hydraulic and electrical knowledge.

Benefits:

401(k)
401(k) 4% Match
401(k) matching
403(b)
Dental insurance
Employee assistance program
Employee discount
Health insurance
Health savings account
Life insurance
Paid time off
Parental leave
Professional development assistance
Referral program
Retirement plan
Tuition reimbursement
Vision insurance

Experience:

Plastics injection molding: 2 years (Required)
Mold or Process Technician: 2 years (Required)

Work Location: In person

Quick Apply

Refine Your Search

Process Control Technician jobs

Process Mold Technician, Injection Molding, 3rd Shift

Service Technician

Grader Maintenance Technician III

Production Technician

LSR Process Technician

Metrology Technician

Electro Mechanical Technician II

Medical Lab Technician - MLT

Quality Control Technician

Coating Technician

CMM Quality Technician

Foundry Technician

I&E Technician

Electronic Technician [PH]

Automation Maintenance Technician – Jenbacher Engines

Operations & Service Technician

Feed Mill Maintenance Technician

Electromechanical Technician - 2nd Shift

Maintenance Technician - Rotating DuPont Schedule

Instrumentation & Electrical Technician

I want to receive the latest job alert for Process Control Technician

Related Searches

Explore jobs in more locations

Job Seeker Tools

Employer Tools

Browse

Stay Connected