Top 1246 Process Development Engineer Jobs in Orange, CA

Manufacturing Engineer
All American Racers Inc —Santa Ana, CA
- $100,000 - $130,000 a year
- Full-time
- Microsoft Outlook
- Writing skills
- Mid-level
- Health insurance
- Dental insurance
Quick Apply
Production Planning Engineer
Advanced Ground Systems Engineering —Santa Fe Springs, CA
- $90,000 - $120,000 a year
- Full-time
- Oracle
- Office
- Master's degree
- Health insurance
- Dental insurance
Quick Apply
Director of Engineering and CI
Acra Aerospace —Anaheim, CA
- $135,000 - $175,000 a year
- Full-time
- Engineering
- ERP systems
- 8 years
- Health insurance
- Dental insurance
Quick Apply
Director Engineering, New Product Development
Edwards Lifesciences —Irvine, CA
- $159,000 - $226,000 a year
- Full-time
- Surgery
- 5 years
- Engineering
Operations Process Engineer - West Region
Linde Gas US —Wilmington, CA
- $106,575 - $156,310 a year
- Weekends as needed
- Background check
- Microsoft Excel
- Customer service
- Health savings account
- Paid holidays
Quick Apply
Senior Geotechnical Engineer
Giles Engineering Associates, Inc —Orange, CA
- $90,000 - $160,000 a year
- Full-time
- 5 years
- Bachelor's degree
- Team management
- Profit sharing
- Health savings account
Quick Apply
3d
Senior Power Electronics Engineer
AMETEK Programmable Power —Irvine, CA
- $150,000 - $180,000 a year
- Full-time
- Background check
- 7 years
- Microsoft Excel
- Health savings account
- Paid holidays
Quick Apply
Electrical Engineer – Consulting Engineering
Legence —Irvine, CA
- $115,000 - $150,000 a year
- Full-time
- Hybrid work
- Mentoring
- US work authorization
- Senior level
- AD&D insurance
- Disability insurance
Quick Apply
Manufacturing Engineering Technician
Lee Spring Company LLC —Whittier, CA
- $50,000 - $55,000 a year
- Full-time
- English
- Mid-level
- 3 years
Quick Apply
Project Engineer - Electrical, Controls & Instrumentation
INNIO —Brea, CA
- Clean driving record
- Ability to walk for extended periods
- 5 years
Quick Apply
Electrical Design Engineer - 3453
Project Partners —Fountain Valley, CA
- $95 - $110 an hour
- Part-time
- Hybrid work
- Engineering
- Driver's License
- Bachelor's degree
- Profit sharing
- Health insurance
Quick Apply
Senior Process Engineer
AMETEK —Rosemead, CA
- $85,000 - $110,000 a year
- Full-time
- Bachelor of Science
- Mentoring
- US work authorization
- Health insurance
- Dental insurance
Quick Apply
Plumbing Design Manager
RimePro Inc —Lakewood, CA
- $130,000 - $180,000 a year
- Full-time
- Hospitality
- Residential
- 3 years
Quick Apply
Electrical design Engineer
TMP Worldwide India Private Limited for ERS US —Irvine, CA
- $100,000 - $115,000 a year
- Email
- 7 years
- Analysis skills
- In-person
- AD&D insurance
- Paid holidays
Quick Apply
Mechnical Engineering, Sr Director
Adroit Worldwide Media, Inc (AWMF) —Santa Ana, CA
- $120,000 - $150,000 a year
- Full-time
- Background check
- 7 years
- Master's degree
- Health savings account
- Health insurance
Quick Apply
Contract Thermal Engineer
Advantest —Lake Forest, CA
- $71,792.56 - $100,000.00 a year
- Temporary
- Customer service
- Mid-level
- 3 years
Quick Apply
Sustaining Engineering Manager - Medical Device
Confidential —Orange County, CA
- $155,000 - $175,000 a year
- Full-time
- 5 years
- Engineering
- English
- Health insurance
- Dental insurance
Quick Apply
New Product Development (NPD) Engineer
AMETEK —Rosemead, CA
- $85,000 - $110,000 a year
- Full-time
- 6 years
- Bachelor of Science
- Continuous improvement
- Health insurance
- Dental insurance
Quick Apply
Mechanical Engineer
International Medication Systems Ltd —South El Monte, CA
- $30 - $34 an hour
- Full-time
- English
- Mid-level
- Office
- Health insurance
- Dental insurance
Quick Apply
Senior Project Engineer Electrical
Feit Electric —Pico Rivera, CA
- $90,000 - $120,000 a year
- Email
- 7 years
- Office
- Ability to lift 50 pounds
- Dental insurance
- 401(k)
Quick Apply

I want to receive the latest job alert for Process Development Engineer in Orange, CA

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

Explore jobs in more locations

Process Development Engineer jobs near Orange, CA

Director Of Engineering jobs in Anaheim, CA

Electrical Engineer jobs in Irvine, CA

Engineer jobs in Lake Forest, CA

Electronics Engineer jobs in Irvine, CA

Manufacturing Engineer jobs in Santa Ana, CA

Project Engineer jobs in Brea, CA

Geotechnical Engineer jobs in Orange, CA

Planning Engineer jobs in Santa Fe Springs, CA

Mechanical Engineer jobs in South El Monte, CA

Hardware Engineer jobs in Irvine, CA

Manufacturing Technician jobs in Manchester, NH

Materials Testing Technician jobs in Los Angeles, CA

Manufacturing Technician jobs in Puerto Rico

X Ray Technician jobs in Newark, NJ

Manufacturing Technician jobs in Santa Maria, CA

Manufacturing jobs in Athens, GA

Manufacturing Technician jobs in Rockford, IL

Engineering Intern jobs in Atlanta, GA

Funeral Director jobs in Indiana

Director Of Engineering jobs in Waltham, MA

Manufacturing Engineer

All American Racers Inc -
Santa Ana, CA

Quick Apply

Job Details

Full-time
$100,000 - $130,000 a year

Benefits

Health insurance
Dental insurance
401(k)
Paid time off
Vision insurance
Life insurance

Qualifications

Microsoft Outlook
Writing skills
Windows
Project management experience in manufacturing
Manufacturing facility experience
Bachelor's degree
Training & development
Manufacturing engineering
Microsoft Project
Manufacturing company experience
Mechanical knowledge

Full Job Description

POSITION SUMMARY

We pride ourselves on delivering the highest quality, large- and small-scale composite structures for our aerospace, defense, and commercial customers. AAR has over 50 years of experience from our roots in auto racing through years of supporting aerospace and defense. The key to our success is largely dependent on our dedicated family of hard-working team members with a can-do attitude. We’re currently searching for an experienced Industrial Manufacturing Engineer to join our ranks and continue our tradition of success.

Primary Duties and Responsibilities: include the following and all other duties assigned.

· Candidate will support the new product development (NPD) team with a focus on promoting cost effective design for manufacturing and assembly (DFMA).

· Candidate will support the transition of new products from NPD into value stream (VS) production. This includes ensuring accurate preparation of process router sheets and standard labor hours, detailed work instructions, and Bill of Materials as well as creating work cells, setting up the line, ensuring adequate line capacity, development of operator training by the NPD team and VS production leads, creating standard work and detailed work instructions, etc.

· Provides full line support to assist VS production in resolving assembly, contractual, and/or technical matters.

· Collaborate with quality on Rejected Material disposition and resolution to related manufacturing process problems.

· Evaluate and process Engineering Change Orders (ECO) through completion. Coordinate implementation of ECOs on affected hardware.

· Provide cost estimating support for new RFQ programs.

· Generate plant wide cost reduction and VS productivity improvements projects. Manufacturing project management participation in planning, execution and tracking of on-going production, new product release, and rework projects as assigned by the Value Stream Manager. Facilitate and manage multiple projects and initiatives at one time.

Qualification Requirements: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

· Education and/or Experience (Must be relevant to the job, not the person. Must be the minimum qualifications relevant to the job and all applicants must meet minimum qualifications):

Four (4) year degree in Manufacturing/Industrial Engineering or related technical degree from accredited school and 3-5 years of relevant experience in job shop and lower volume production environments. Must have hands on knowledge of methods, processes, tools and equipment in a manufacturing facility. Candidate must be mechanically inclined and hands on. Lean implementation experience desired.

· Skills: Competent knowledge of Windows, Excel, Word, Access, PowerPoint, MSN Project, ERP and Outlook. Ability to communicate orally and in writing utilizing basic project management skills is required. Understanding of basic lean manufacturing concepts is strongly desired (value stream mapping, 5-S, Kanban, elimination of waste, standard work, visual management, lean cell design, setup reduction, mistake proofing, etc).

· Reasoning Ability: Must be able to work under pressure and deal with multiple priorities and still meet deadlines. Ability to solve practical problems and apply critical thinking to address issues only limited information is available. Ability to interpret a variety of instructions furnished in written, oral or diagram format. Candidate must be mechanically inclined with a true understanding of equipment.

Physical Demands: The physical demands described here are representatives of those that must be met by an employee to successfully perform the essential functions of this job. Careful not exceed safe lifting limits. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Individuals should be physically able to carry out job assignments in a production environment. Physical activity will require walking, climbing stairs and lifting 25 pounds without assistance. Should have good overall vision, depth perception and have the ability to differentiate colors.

Hazard Analysis/Personal Protective Equipment Required: The hazards described here are representative of those an employee could encounter while performing the essential functions of the job. The personal protective equipment will be provided by the company to alleviate the hazard.

Physical Requirements:

Prolonged periods of sitting at a desk and working on a computer.
Must be able to access and navigate each department at the organization’s facilities.
Must be able to lift and carry items weighing up to twenty-five (25) pounds on a repetitive basis.
Must be able to stand, walk, bend, squat, climb, kneel, twist and work at heights on an intermittent basis for up to twelve (12) hours.
Requires hand manipulation including simple grasping, pushing and pulling of materials.
Must be able to reach and work above and below the shoulder level.
Must be able to work with and around forklifts and hazardous machinery.
Must be able to wear all the required Personal Protective Equipment.
Visual acuity skill to detect any flaws in the parts being inspected.

The position must meet Arms Export Control Act (AECA) and the International Traffic in Arms Regulations (ITAR) Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee. Employment with the company is contingent on either verifying U.S.-person status or obtaining any necessary license that the applicant will be required to answer certain questions for export control purposes. The information will be reviewed by compliance personnel to ensure compliance with federal law. The employer may choose not to apply for a license for such individuals whose access to export-controlled technology or software source code may require authorization and may decline to proceed with an applicant on that basis alone.

Job Type: Full-time

Pay: $100,000.00 - $130,000.00 per year

Benefits:

401(k)
Dental insurance
Health insurance
Life insurance
Paid time off
Vision insurance

Experience:

composites: 3 years (Preferred)
Manufacturing engineering: 3 years (Preferred)
aerospace : 3 years (Preferred)

Work Location: In person

Quick Apply

Refine Your Search

Process Development Engineer jobs in Orange, CA

Manufacturing Engineer

Production Planning Engineer

Director of Engineering and CI

Director Engineering, New Product Development

Operations Process Engineer - West Region

Senior Geotechnical Engineer

Senior Power Electronics Engineer

Electrical Engineer – Consulting Engineering

Manufacturing Engineering Technician

Project Engineer - Electrical, Controls & Instrumentation

Electrical Design Engineer - 3453

Senior Process Engineer

Plumbing Design Manager

Electrical design Engineer

Mechnical Engineering, Sr Director

Contract Thermal Engineer

Sustaining Engineering Manager - Medical Device

New Product Development (NPD) Engineer

Mechanical Engineer

Senior Project Engineer Electrical

I want to receive the latest job alert for Process Development Engineer in Orange, CA

Related Searches

Explore jobs in more locations

Job Seeker Tools

Employer Tools

Browse

Stay Connected