Top 29403 Production Operator Jobs

Machine Operator / CNC Machinist - 1st Shift (5:00am-1:00pm)
Pankl Aerospace —Cerritos, CA
- $28 - $30 an hour
- Full-time
- 5 years
- Computer literacy
- English
- Health insurance
- Dental insurance
Quick Apply
10d
Machine Operator - 1st and 2nd shift
Truly Engaging —Carol Stream, IL
- $20 - $24 an hour
- Full-time
- English
- High school diploma or GED
- 1 year
- Health insurance
- Dental insurance
Quick Apply
Mill Operator
Kerns Manufacturing Corporation —Long Island City, NY
- $26.92 - $31.63 an hour
- 8 hour shift
- Mid-level
- High school diploma or GED
- In-person
- Paid holidays
- Health insurance
Quick Apply
Production Operator - Solder
Plexus —Neenah, WI
- $35,200 - $52,800 a year
- Background check
- 5 years
- Computer literacy
- Health insurance
- Dental insurance
Quick Apply
Lathe Operator
Kerns Manufacturing Corporation —Long Island City, NY
- $26.92 - $31.63 an hour
- 8 hour shift
- Mid-level
- High school diploma or GED
- In-person
- Paid holidays
- Health insurance
Quick Apply
Production Operator
GAF Materials Corporation —Dallas, TX
- $27.88 an hour
- Full-time
- Background check
- Basic math
- Pass drug screening
- Wellness program
- Health insurance
Production Operator
Henkel —Bay Point, CA
- $28.48 an hour
- Full-time
- High school diploma or GED
- Warehouse experience
- Entry level
Quick Apply
Production Operator
Alto Ingredients, Inc —Pekin, IL
- $25.02 - $32.82 an hour
- 8 hour shift
- Pass drug screening
- Mid-level
- Forklift
- Health insurance
- Dental insurance
Quick Apply
First Helpers
Dover Chemical Corp —Hammond, IN
- $30.85 - $35.85 an hour
- Overtime
- High school diploma or GED
- Manufacturing
- Entry level
- Health savings account
- Paid holidays
Quick Apply
10d
Production Operator
Mitsubishi Chemical Polyester Film —Greer, SC
- $25.30 - $34.55 an hour
- 12 hour shift
- Background check
- 18 years or older
- Computer literacy
- On-the-job training
- Employee assistance program
Production Operator
Roquette —Institute, WV
- $26.63 - $45.67 an hour
- Weekends as needed
- Microsoft Excel
- Mid-level
- Ability to climb stairs
Operator Production 1st Shift
Dakkota Integrated Systems —Detroit, MI
- Full-time
- High school diploma or GED
- Math
- Travel
Quick Apply
Production Operator
Pacific Coast Companies, Inc. —Newark, CA
- $30.20 an hour
- Weekends as needed
- 18 years or older
- Forklift
- Residential
- Profit sharing
- Paid holidays
Packaging Operator
True Sea Moss —Humble, TX
- $23 - $30 an hour
- Overtime
- Background check
- English
- High school diploma or GED
Quick Apply
5d
Machine Operator, 1st shift (6AM-2:30PM)
Viking Drill and Tool —Saint Paul, MN
- $24.52 - $30.51 an hour
- Overnight shift
- Pass drug screening
- High school diploma or GED
- US work authorization
- Profit sharing
- Health savings account
Quick Apply
12d
Copperbond Operator (3rd Shift)
Wieland —Waterbury, CT
- $29.30 - $34.14 an hour
- Full-time
- English
- High school diploma or GED
- In-person
- Health savings account
- Paid holidays
Production Operator - 1st shift
Moore & Associates —Oceanside, CA
- $22.00 - $22.50 an hour
- Full-time
- In-person
- Manufacturing
- Entry level
- Health insurance
Quick Apply
10d
Production Line Operator
Prysmian Group —Illinois
- $22.68 - $39.96 an hour
- Neurology
- Entry level
- Paid parental leave
- Paid holidays
Production Operator - US2/US8/US10 - Anderson, SC
Michelin —Sandy Springs, SC
- Full-time
- Manufacturing
- Entry level
- Opportunities for advancement
Production Operator - Packaging
Kerry —Seattle, WA
- $26.48 an hour
- Overtime
- Pass drug screening
- High school diploma or GED
- Ability to lift 50 pounds
- Health insurance
- Dental insurance

I want to receive the latest job alert for Production Operator

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

Explore jobs in more locations

Production Operator jobs near

Machine Operator / CNC Machinist - 1st Shift (5:00am-1:00pm)

Pankl Aerospace
Cerritos, CA

Quick Apply

Job Details

Full-time
$28 - $30 an hour
10 days ago

Benefits

Health insurance
Dental insurance
401(k)
Paid time off
Parental leave
Employee assistance program
Vision insurance
401(k) matching
Life insurance
Referral program
Retirement plan

Qualifications

Mechanical blueprint interpretation
Computer operation
Machine setup
Equipment setup (production tasks)
Blueprint specification interpretation
CNC lathe
Stress management
Computer literacy
Monitoring dimensions
5S
Machining tool setup
English
Shop math
High school diploma or GED
Manufacturing standard operating procedures
CNC milling machine
Dimensional measurements
CNC quality inspection
Precision measurement in machining
Computer skills
Operational excellence initiatives
Manufacturing
Quality improvement programs in engineering
Hand tools
Manufacturing company experience
CNC
AS9100
CNC machining

Full Job Description

FIRST SHIFT: 5:00 AM - 1:00 PM

Summary

The Machine Operator is responsible for operating various equipment from hand tools, CNC machines, manual machines and any other machines necessary to meet the needs and schedules handed down from the Production Manager to the respective Shift Supervisor for whom the Machinist reports to.

Required Qualifications

Education and/or experience consisting of a high school diploma or equivalent, and minimum 5 years’ experience in Manufacturing machining operations required.
Basic, Intermediate or Advance Machining Certificate or (Equivalent Experience)
Aerospace Experience preferred
Machinist capable of setting up and operating manual and/or machining equipment per setup sheet, engineering instructions, work instructions, etc.
Communication skills required consists of the ability to read and interpret documents such as: (a) safety rules, (b) preventative maintenance instructions, (c) procedure instructions, (d) complex blueprints, (e) work order documents (f) engineering work instructions (g) setup sheets
Basic computer skills
Basic shop math
Able to read and write English proficiently
Able to write routine reports and correspondence
Understanding of GD&T measurement units
Able to measure and record dimensions per sketches and ICL requirements
Use of inspection tools, such as, but not limited to: Height gages, Bore gages, Radius gages, Dial calipers, Flapper gages, Scales, Veneer, Micrometers, Ultrasonic gages, Ring gages, Plug gages, Use of wires to check threads, Use of snap gages, Optical comparator
Ability to work in a team environment
Able to work under pressure in fast pace environment to meet daily targets
Must be “solution” oriented and able to systematically resolve problems
Must have good attendance & punctuality history and reliable
Must be able to think on your feet and seek assistance in a timely manner
Experience with 5S and continuous improvement practices
Experience with AS9100 and aerospace industry requirements
Knowledge of flight safety procedures
Ability of working interdisciplinary and according to the requirements of the process
Must have a “Can Do Attitude” and able to execute plans

Essential Duties and Responsibilities (Other duties may be assigned)

Know and execute PAS Management system procedures
Familiar with company’s products and processes
Carryout / execute activities assigned by Shift Supervisor according to PAS Management Standards. This may include, although not limited to: (a) training, (b) planning, (c) production requirements, (d) daily work assignments, (e) resolving problems, (f) communicating with Apprentices, (g) assist in prioritizing and scheduling
Ability to setup and operate CNC lathes, CNC Mills (up to 5 axis), CNC Hobber, CNC Cylindrical Grinder, and CNC Mill Turn machines
Ability to read and understand CAM programs (G & M Codes) preferred
Ability to setup and operate manual machines, including but not limited to conventional lathes, honing, and manual thread grind
Read and interpret blueprints, engineering drawings, and work instructions to determine specifications
Execution of the schedules, including tooling requirements
Meet the needs of production from the Shift Supervisor without exceeding the daily shift patterns established
Participate in RCCA process and take necessary steps to implement when called to do so
Comply with daily shift pattern
Execute the machine preventative maintenance program (PMP)
Utilization, reporting and recording of data using ERP
No quality “escape” within the cell
Report any problems in production that will hinder your ability to meet the daily production immediately to the Lead man and/or shift supervisor
Operation of equipment to satisfy requirements set by Shift Supervisor
Recommend process improvements through the submission of engineering change orders
Cross-training of employees
Perform other duties as assigned

Export Compliance

To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Physical Demands and Work Environment

While performing the duties of this Job, the employee needs to be aware that this position is physically straining. The ability to cope with stress and multiple tasks is essential. Employee is regularly required to sit and talk or hear. The employee is frequently required to use hands and fingers, handle, or feel and reach with hands and arms. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is occasionally exposed to risk of electrical shock. The noise level in the work environment is usually moderate.

Job Type: Full-time

Pay: $28.00 - $30.00 per hour

Benefits:

401(k)
401(k) matching
Dental insurance
Employee assistance program
Health insurance
Life insurance
Paid time off
Parental leave
Referral program
Retirement plan
Vision insurance

Work Location: In person

Quick Apply

Refine Your Search

Production Operator jobs

Machine Operator / CNC Machinist - 1st Shift (5:00am-1:00pm)

Machine Operator - 1st and 2nd shift

Mill Operator

Production Operator - Solder

Lathe Operator

Production Operator

Production Operator

Production Operator

First Helpers

Production Operator

Production Operator

Operator Production 1st Shift

Production Operator

Packaging Operator

Machine Operator, 1st shift (6AM-2:30PM)

Copperbond Operator (3rd Shift)

Production Operator - 1st shift

Production Line Operator

Production Operator - US2/US8/US10 - Anderson, SC

Production Operator - Packaging

I want to receive the latest job alert for Production Operator

Related Searches

Explore jobs in more locations

Job Seeker Tools

Employer Tools

Browse

Stay Connected