Top 881 Cad/cam programmers Jobs

CAD/CAM Programming and Design Specialist (Remote)
University of Dayton —Warner Robins, GA
- Full-time
- Up to 50% travel
- Mid-level
- Ability to lift 50 pounds
CAD/CAM Programming and Design Trainer - Remote
University of Dayton —Warner Robins, GA
- Full-time
- Up to 50% travel
- Mid-level
- 3 years
CAD/CAM Programming and Design Specialist
University of Dayton —Warner Robins, GA
- Full-time
- Up to 50% travel
- Mid-level
- High school diploma or GED
CNC Router Operator CAD Alpha Cam Programmer
TNT Door & Drawer —Covington, GA
- Weekends as needed
- Mid-level
- High school diploma or GED
- Analysis skills
- Paid holidays
- Health insurance
Quick Apply
CNC Programmer/Machinist
VerTechs Enterprises, Inc —El Cajon, CA
- $27 - $30 an hour
- Part-time
- English
- Mid-level
- In-person
- Health insurance
- Dental insurance
Quick Apply
7d
Millwork Engineer / CNC Programmer
Hyde Park Millwork Inc. —Tampa, FL
- Full-time
- OSHA
- Mid-level
- Office
Quick Apply
11d
CNC Mill/Lathe Programmer
General Machine Products, Inc. —Cleveland, OH
- $30 - $40 an hour
- Full-time
- Background check
- Mid-level
- In-person
- Health insurance
- Dental insurance
Quick Apply
CNC Programmer
Columbus Hydraulics-- A Wipro Hydraulics Company —Columbus, NE
- $20 - $30 an hour
- Overtime
- Mid-level
- 3 years
- High school diploma or GED
- Relocation assistance
- Health insurance
Quick Apply
CNC Programmer/Engineer
Threadlock Precision LLC —Cypress, CA
- From $70,000 a year
- Full-time
- Mid-level
- 3 years
- Continuous improvement
- Health savings account
- Relocation assistance
Quick Apply
Swiss Setup Machinist PROGRAMMER (Citizen Swiss)
Labor Finders' Client —Hayden, ID
- $25 - $36 an hour
- Full-time
- Mid-level
- Forklift
- Power tools
- Health insurance
Quick Apply
CNC Machinist/Programmer
Confidential —Auburn Hills, MI
- $25 - $35 an hour
- Full-time
- Mid-level
- Ability to lift 50 pounds
- In-person
- Profit sharing
- Health savings account
Quick Apply
14d
CNC Programmer
Polyurethane Machinery Corporation —Lakewood, NJ
- $72,000 - $80,000 a year
- Full-time
- Mid-level
- Quality control
- In-person
- Health insurance
- Dental insurance
Quick Apply
10d
CNC Programmer / Manufacturing Engineer
CAD Enterprises —Phoenix, AZ
- $65,000 - $95,000 a year
- Full-time
- CAD
- 5 years
- Engineering
- Health insurance
- Dental insurance
Quick Apply
CNC Machinist Programmer (20+ years)
SK International —Wixom, MI
- $29 - $35 an hour
- Full-time
- Background check
- AutoCAD
- Forklift
- Health insurance
- Dental insurance
Quick Apply
7d
CNC Programmer/Tool Maker
Miniature Custom Manufacturing —Vicksburg, MI
- Full-time
- 5 years
- Continuous improvement
- US work authorization
- Health insurance
- Dental insurance
Quick Apply
4d
Sr. CNC Programmer
SAPA Transmission —Shelby Charter Township, MI
- Full-time
- 5 years
- Senior level
- Communication skills
- Paid holidays
- Disability insurance
Quick Apply
13d
CNC Mill Programmer/Operator
Holbrook Tool and Molding Inc —Meadville, PA
- $22.90 - $25.00 an hour
- Full-time
- Mid-level
- Forklift
- In-person
- Health savings account
- Health insurance
Quick Apply
Programmer
Mountain Manufacturing —Lino Lakes, MN
- $35 - $43 an hour
- Full-time
- CAD
- Mid-level
- Ability to lift 50 pounds
- Health insurance
- Dental insurance
Quick Apply
7d
CNC Programmer - Woodworking
Woodcraft Designers & Builders, LLC —Attleboro, MA
- $30.80 - $37.09 an hour
- Full-time
- Mid-level
- 3 years
- In-person
- Paid holidays
- Health insurance
Quick Apply
CNC LATHE OPERATOR/PROGRAMMER
McCurdy Tool —Caledonia, IL
- $25 - $30 an hour
- Full-time
- Mid-level
- Forklift
- Programmable logic controllers
- Health insurance
- Dental insurance
Quick Apply

I want to receive the latest job alert for cad/cam programmers

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

CAD/CAM Programming and Design Specialist (Remote)

University of Dayton -
Warner Robins, GA

Apply Now

Job Details

Full-time

Qualifications

Mid-level
2 years
Communication skills

Full Job Description

Job No: 503438
Work Type: Staff Full Time (1500 hours or greater)
Location: Remote, Warner Robins, GA
Category: Research Institute Staff
Department: Applied Digital Solutions - 250612
Pay Grade: T2/T3 - Non Exempt
Advertised: March 30, 2026
Applications close:

Position Summary:

Are you interested in taking your CNC Programing and machining skills to the next level? Do you like sharing what you know with others? Do you like to travel? UDRI is seeking a CAD/CAM Programming trainer to assist the Air Force Metal Fabrication and Technologies Office (AFMFTO) with their support of Air Force fabrication shops worldwide.

We are seeking an experienced Mastercam programmer to provide technical training in both CNC programming and CNC machine tool operations, onsite at Air Force locations both stateside and overseas. The selected candidate will remote interface with USAF hardware owners and engineers at the Advanced Technology and Training Center - Middle Georgia (ATTC-MG) to provide guidance/advice on design for manufacturability, equipment and part set up, and machining. Provide guidance/advice for part processing and post processing. The candidate will also provide call-in support from Air Force metals shops for Mastercam, SolidWorks, and Haas machine troubleshooting as required.

Minimum Qualifications:

T2 Minimum Qualifications:

High school graduation or its equivalent.
Minimum of 3 years’ experience with machining. Setup and operation of 2, 3, 4 and 5-axis CNC machines (i.e. Lathe, Mill, Wire EDM), including at-machine program edits.
Minimum of 3 years’ experience with Mastercam programming of 2, 3, 4 and 5-axis CNC machines (i.e. Lathe, Mill, Wire EDM).
Minimum of 3 years’ experience with SolidWorks 3D CAD software to model and reverse engineering obsolete parts.
Minimum of 3 years’ experience in interacting with design and manufacturing engineers and other technical personnel, providing guidance around design for manufacturability.
Prior experience training or mentoring others in Mastercam programming and CNC machine tool operations.
Ability to read technical drawings.
Possess an understanding of geometric dimensioning and tolerances (GD&T).
Experience using precision measurement equipment, such as outside micrometers, Vernier calipers, dial indicators, optical comparators, etc.
Self-starter with ability to operate with minimal supervision.
Effective verbal communication skills with team members at all levels.
Organizational skills.
Able to lift fifty (50) pounds.
Able to travel (25-50%) of time. Includes both stateside and internationally.
Possess a valid passport or ability to obtain a passport within sixty (60) days of hire.
Valid driver's license with low risk driving record.
Due to the requirements of our research contracts with the U.S. federal government, candidates for this position must be a U.S. citizen.

T3 Minimum Qualifications - Must meet requirements for T2 in addition to:

Minimum of 8 years’ experience with machining. Setup and operation of 2, 3, 4 and 5-axis CNC machines (i.e. Lathe, Mill, Wire EDM), including at-machine program edits.
Minimum of 8 years’ experience with Mastercam programming of 2, 3, 4 and 5-axis CNC machines (i.e. Lathe, Mill, Wire EDM).
Minimum of 8 years’ experience with SolidWorks design software to model and reverse engineer obsolete parts for aircraft and equipment.
Minimum of 8 years’ experience in interacting with design and manufacturing engineers and other technical personnel, providing guidance around design for manufacturability.
Formal technical training beyond high school can be substituted for two years of related experience.

Preferred Qualifications:

While not everyone may possess all of the preferred qualifications, the ideal candidate will bring many of the following:

Associate’s degree in technology field or equivalent work experience
Possess a Mastercam Training certificate.
Possess a SolidWorks Training certificate.
Possess an understanding of additive manufacturing equipment and processes.
3 years’ experience in programming, set-up, operation and troubleshooting Additive Manufacturing equipment (i.e. Stratasys Polymer 3D Printers, EOS M290 printing system)
Possess a Geometric dimensioning and tolerances (GD&T) certificate.
3 years’ experience delivering training in both Mastercam programming and CNC machine tool operations.

Special Instructions to Applicants:

To apply please submit a cover letter addressing each minimum qualification and any applicable preferred qualifications that you meet.

Closing Statement:

Informed by its Catholic and Marianist mission, the University is committed to the dignity of every human being. Informed by this commitment, we seek to increase diversity in all of its forms, achieve fair outcomes, and model inclusion across our campus community. The University is committed to policies of affirmative action designed to increase the employment opportunities of individuals with disabilities and protected veterans in compliance with the Rehabilitation Act of 1973 and Vietnam Era Veterans' Readjustment Assistance Act of 1973.

Apply Now

Refine Your Search

cad/cam programmers jobs

CAD/CAM Programming and Design Specialist (Remote)

CAD/CAM Programming and Design Trainer - Remote

CAD/CAM Programming and Design Specialist

CNC Router Operator CAD Alpha Cam Programmer

CNC Programmer/Machinist

Millwork Engineer / CNC Programmer

CNC Mill/Lathe Programmer

CNC Programmer

CNC Programmer/Engineer

Swiss Setup Machinist PROGRAMMER (Citizen Swiss)

CNC Machinist/Programmer

CNC Programmer

CNC Programmer / Manufacturing Engineer

CNC Machinist Programmer (20+ years)

CNC Programmer/Tool Maker

Sr. CNC Programmer

CNC Mill Programmer/Operator

Programmer

CNC Programmer - Woodworking

CNC LATHE OPERATOR/PROGRAMMER

I want to receive the latest job alert for cad/cam programmers

Related Searches

Explore jobs in more locations

Job Seeker Tools

Employer Tools

Browse

Stay Connected