Top 3061 Cnc machine programmer Jobs

CNC Programmer
Continental Tool Group - Hy-Tech Machine —Cranberry Township, PA
- $70,000 - $95,000 a year
- Full-time
- Mid-level
- High school diploma or GED
- Ability to lift 50 pounds
Quick Apply
14d
CNC Programmer
TitanRidge Talent Solutions —Santa Fe Springs, CA
- $35 - $45 an hour
- Full-time
- Mid-level
- Fair chance
- In-person
- Health insurance
- Paid time off
Quick Apply
9d
CNC Programmer
Deringer Ney —Bloomfield, CT
- Full-time
- 5 years
- High school diploma or GED
- Ability to lift 50 pounds
Quick Apply
CNC Programmer
American Floor Covering, Inc. —East Hartford, CT
- $60,000 - $80,000 a year
- Full-time
- No experience needed
- Mid-level
- No degree
- Health insurance
- Dental insurance
Quick Apply
10d
CNC Programmer/Machinist
Maverick Tech —Chicago, IL
- $28.50 - $41.80 an hour
- Full-time
- Mid-level
- 3 years
Quick Apply
CNC Swiss Programmer
RimePro Inc —Gardena, CA
- $45 - $60 an hour
- Full-time
- 5 years
- High school diploma or GED
- Continuous improvement
- Paid holidays
- Health insurance
Quick Apply
CNC Programmer (TOP Growing Aerospace Manufacturer)!!!
RimePro Inc —Hawthorne, CA
- $45 - $62 an hour
- Full-time
- Senior level
- Commercial
Quick Apply
Mastercam Programmer - 1st Shift
Leoforce —Minneapolis, MN
- $35 - $40 an hour
- Continuous improvement
- Mentoring
- Senior level
Quick Apply
CNC Machinist, Prototype Machine Shop
Tesla —Fremont, CA
- $27.92 - $44.40 an hour
- Overtime
- Mid-level
- Forklift
- Analysis skills
- Commuter assistance
- Health savings account
CNC Machinist-CAM Programmer
Tiffany & Co. —New York, NY
- $119,000 - $140,000 a year
- Remote
- Analysis skills
- Continuous improvement
- Mentoring
CNC Programmer
Air & Liquid System Corporation - Buffalo Pumps & Office —North Tonawanda, NY
- $90,000 - $110,000 a year
- Full-time
- 5 years
- High school diploma or GED
- Analysis skills
Quick Apply
CNC Programmer
HEICO —Rockmart, GA
- Full-time
- Software troubleshooting
- Mid-level
- Experience equivalent to degree accepted
CNC Programmer
B&T USA, LLC —Herriman, UT
- $80,000 - $115,000 a year
- Full-time
- Background check
- Mid-level
- Office
- Paid holidays
- Disability insurance
Quick Apply
CNC Programmer
GCM Medical and OEM, Inc. —Union City, CA
- $50 - $60 an hour
- Full-time
- 5 years
- High school diploma or GED
- Senior level
Experienced CNC Programmer/Operator
Precision Ceramics USA Inc. —Palmetto, FL
- Full-time
- Mid-level
- 2 years
- Communication skills
Quick Apply
CNC Programmer
Puch Manufacturing —Orlando, FL
- Call employer
- Software troubleshooting
- Mid-level
- Computer skills
- Paid holidays
- Health insurance
CNC Machinists, Operators & Programmers – Opportunities Across the USA – We Want to Talk to You
LAIMNA —Cleveland, OH
- $20 - $100 an hour
- Full-time
- Mid-level
- In-person
- Manufacturing
- 403(b) matching
- Relocation assistance
Quick Apply
CNC Production Programmer
Complete Metal Design inc —Glendora, CA
- $35 - $55 an hour
- Full-time
- Mid-level
- High school diploma or GED
- Mentoring
- Health insurance
- Dental insurance
Quick Apply
CNC Programmer
GM Performance Power Units —Concord, NC
- Full-time
- Microsoft Excel
- 5 years
- Math
- Disability insurance
- Health insurance
Quick Apply
CNC Programmer
Venus Aerospace —Houston, TX
- Online Application
- 5 years
- Computer literacy
- High school diploma or GED
- Health insurance
- Dental insurance
Quick Apply

I want to receive the latest job alert for cnc machine programmer

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

CNC Programmer

Continental Tool Group - Hy-Tech Machine
Cranberry Township, PA

Quick Apply

Job Details

Full-time
$70,000 - $95,000 a year
14 days ago

Qualifications

CNC programming
Mechanical blueprint interpretation
GibbsCAM
Personal protective equipment (PPE) use
ISO standards
G-code
C#
Machining fixtures
First article inspection
High school diploma or GED
Dimensional measurements
C++
Parts drawings
CNC quality inspection
Precision measurement in machining
CNC G-code Programming
Quality standards in production
Milling machines
Cutting tools
Python

Full Job Description

Markets Served: Aerospace & Defense, Industrial, and MRO

Reports To: Manager of Global CNC Programming

FLSA: Exempt, Full-time

Direct Reports: None (individual contributor; may mentor machinists and junior programmers)

Position Summary

The CNC Programmer develops, proves out, and optimizes the machining programs that turn raw stock into the precision components behind our pneumatic tools—impact wrenches, ratchets, drills, grinders, sanders, and related accessories—serving aerospace & defense, industrial, and MRO customers. Working primarily in ESPRIT CAM, the programmer creates efficient, repeatable toolpaths for multi-axis mills, lathes, and mill-turn equipment, then partners with machinists, engineering, and quality to bring parts to first-article approval and into stable production. Success in this role is measured by parts that run safely, hit print the first time, and cycle at or below target—reducing scrap, cycle time, and machine downtime across the shop.

Key Outcomes — What Success Looks Like

Programming Quality: Programs run to print with first-article approval on the first or second attempt; tight-tolerance features (bores, threads, splines, sealing surfaces) hold dimensional and surface-finish requirements consistently.
Productivity: Cycle times meet or beat standards through smart toolpath strategy, optimized feeds/speeds, and reduced air-cutting; setup and changeover times trend down year over year.
Reliability & Safety: Minimal crashes, tool collisions, or scrapped parts due to programming error; all programs verified in simulation before they reach the machine; safe, documented setups every time.
Continuous Improvement: Standardized post-processors, tooling libraries, and reusable program templates that shorten future programming time; documented savings from process and tooling improvements.
Support & Documentation: Complete, accurate setup sheets, tool lists, and work instructions that let any qualified machinist run the job; fast, effective troubleshooting support on the floor.

Core Responsibilities

Create, edit, and optimize CNC programs in ESPRIT and Gibbs for 3-, 4-, and 5-axis milling, turning, and mill-turn applications using 2D/3D models and engineering drawings.
Develop and maintain post-processors, machine/tool libraries, and machining templates; verify all programs through ESPRIT and Gibbs simulation/verification (and other simulation tools as available) before release.
Select tooling, workholding, and machining strategies that balance cycle time, tool life, finish, and part quality; specify and validate feeds and speeds.
Lead and support setup and first-article runs at the machine; troubleshoot dimensional, finish, and tool-life issues and drive them to resolution with machinists and quality.
Produce clear setup sheets, tool lists, and operator work instructions; manage program revisions under document control and keep the program library organized and current.
Partner with manufacturing and design engineering to provide design-for-manufacturing (DFM) feedback on new and revised parts; support NPI from prototype through production launch.
Contribute to continuous-improvement efforts (Lean, Kaizen) targeting cycle time, scrap, setup reduction, and machine utilization (OEE).
Maintain compliance with safety, quality (ISO 9001), and housekeeping standards on the shop floor; support first-article inspection (FAI) and part traceability requirements.

Education, Qualifications & Experience

High school diploma or equivalent required; technical/associate degree or certificate in machining, manufacturing technology, or a related field preferred.
10+ years of hands-on CNC programming experience in a precision machining or metalworking environment; demonstrated proficiency programming in ESPRIT CAM is required.
Strong working knowledge of multi-axis milling, turning, and mill-turn machining; experience with Swiss-type or live-tooling lathes a plus.
Proficient at reading and interpreting engineering drawings, GD&T, and 3D models; able to develop and edit post-processors and G/M-code.
Solid understanding of cutting tools, workholding, fixturing, feeds/speeds, and machine controls (e.g., Fanuc, Haas, Mazak, Okuma, or similar).
Familiarity with inspection methods and equipment (calipers, micrometers, gauges, CMM basics), with ISO 9001 quality practices and first-article inspection (FAI).
Experience programming components for pneumatic tools, fluid power, or other high-precision industrial products strongly preferred.
Detail-oriented, methodical, and collaborative; effective communicator on the shop floor and with engineering.

Physical Demands & Working Conditions

Works primarily in a manufacturing/machine-shop environment with time split between a workstation and the shop floor. Requires prolonged standing and walking on concrete floors, the ability to lift up to 50 lbs, and use of required PPE (safety glasses, hearing protection, steel-toe footwear). Exposure to coolant/oil mist, noise, metal chips, dust/fumes, and operating machinery. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

How Performance Will Be Measured

First-article pass rate and program accuracy; cycle-time performance vs. standard; scrap and rework attributable to programming; crash/collision and tool-breakage incidents; setup and changeover time reduction; on-time delivery of programs and documentation for NPI and production jobs; and contribution to documented continuous-improvement savings.

EOE

Pay: $70,000.00 - $95,000.00 per year

Application Question(s):

Explain your experience with Esprit program language? Have you worked with Gibbs Cam and how did you transition one program to another?

Work Location: In person

Quick Apply

Refine Your Search

cnc machine programmer jobs

CNC Programmer

CNC Programmer

CNC Programmer

CNC Programmer

CNC Programmer/Machinist

CNC Swiss Programmer

CNC Programmer (TOP Growing Aerospace Manufacturer)!!!

Mastercam Programmer - 1st Shift

CNC Machinist, Prototype Machine Shop

CNC Machinist-CAM Programmer

CNC Programmer

CNC Programmer

CNC Programmer

CNC Programmer

Experienced CNC Programmer/Operator

CNC Programmer

CNC Machinists, Operators & Programmers – Opportunities Across the USA – We Want to Talk to You

CNC Production Programmer

CNC Programmer

CNC Programmer

I want to receive the latest job alert for cnc machine programmer

Related Searches

Explore jobs in more locations

Job Seeker Tools

Employer Tools

Browse

Stay Connected