Top 1382 Dcs technician Jobs

E&I Technician
ST Tissue, LLC —Barnwell, SC
- Up to $38.50 an hour
- Extended hours
- Background check
- Ability to walk for extended periods
- Mid-level
- Relocation assistance
- Health insurance
Quick Apply
Field Service Programming Engineer
Coalmont Engineering —Lake View, AL
- $95,000 - $120,000 a year
- Overtime
- Up to 50% travel
- Bachelor of Science
- System design
- Paid holidays
- Health insurance
Quick Apply
Maintenance Tech II - 2B
Distribution Center —Conklin, NY
- $29.55 - $42.90 an hour
- Full-time
- Background check
- Mid-level
- 3 years
10d
Panel Builder
ICR Resources LLC —Silex, MO
- $31 - $43 an hour
- Full-time
- Microsoft Excel
- Microsoft Outlook
- Mid-level
- Paid holidays
- Health insurance
Quick Apply
Field Service Technician
Coalmont Engineering —McCalla, AL
- $70,000 - $90,000 a year
- Overtime
- System design
- Mid-level
- 3 years
- Paid holidays
- Health insurance
Quick Apply
Instrumentation & Electrical Technician
POET —Bingham Lake, MN
- $30 - $40 an hour
- Weekends as needed
- Pass drug screening
- Mid-level
- Ability to lift 50 pounds
- Profit sharing
- Wellness program
Quick Apply
Operations Engineer
Pilot Chemical Co. —Middletown, OH
- Full-time
- Background check
- Computer literacy
- Bachelor of Science
- Health savings account
- Health insurance
Quick Apply
9d
I&E Technician
Energy Transfer Partners —Watford City, ND
- Weekends as needed
- Clean driving record
- Microsoft Outlook
- Construction site
- Profit sharing
- Paid time off
Maintenance Technician
Sun Orchard LLC —Tempe, AZ
- Urgently hiring
- Mid-level
- High school diploma or GED
- Ability to lift 50 pounds
- Health insurance
- Dental insurance
Quick Apply
IC & E Technician
Hamilton Liberty, LLC —Towanda, PA
- $45 - $50 an hour
- Extended hours
- Background check
- Heavy equipment operation
- 5 years
- Health savings account
- Health insurance
Quick Apply
Electrical Technician
Energy Transfer Partners —Mont Belvieu, TX
- Overtime
- Computer literacy
- Basic math
- Mid-level
- Profit sharing
- Paid time off
I&E Supervisor
Continental Carbon —Ponca City, OK
- Full-time
- Background check
- 5 years
- Mid-level
- Relocation assistance
- Health insurance
Quick Apply
CE
The Lycra Company LLC —Waynesboro, VA
- $38.14 - $46.03 an hour
- 8 hour shift
- Microsoft Outlook
- Computer literacy
- Mid-level
Quick Apply
I&E Technician
Energy Transfer Partners —Epping, ND
- Weekends as needed
- Clean driving record
- Microsoft Outlook
- Construction site
- Profit sharing
- Paid time off
Automation Engineer
Ajinomoto Health & Nutrition North America, Inc. —Raleigh, NC
- Full-time
- Mid-level
- Mentoring
- Trade school
Quick Apply
Maintenance Technician
MGC Advanced Polymers, Inc. —Colonial Heights, VA
- From $30.07 an hour
- Full-time
- Background check
- Word processing
- Engineering
- On-the-job training
Quick Apply
Automation Technician
ABEC Inc —Springfield, MO
- Full-time
- Mid-level
- Travel
- Experience equivalent to degree accepted
- Paid holidays
- Health insurance
8d
Controls & Instrumentation Technician
Prime Controls, LP —Mesa, AZ
- $34.60 - $41.66 an hour
- Full-time
- Customer service
- Military
- Mid-level
- Relocation assistance
- Health insurance
Quick Apply
Lead Facility Maintenance Technician
Valicor Environmental Services LLC —Adamsville, AL
- Full-time
- Pass drug screening
- Mid-level
- 3 years
Quick Apply
Electrical & Instrumentation Technician
UBE Corporation America Inc. —Gastonia, NC
- Weekends as needed
- 5 years
- Word processing
- Computer literacy
Quick Apply

I want to receive the latest job alert for dcs technician

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

Explore jobs in more locations

dcs technician jobs near

Automation Engineer jobs in Raleigh, NC

Field Service Engineer jobs in Lake View, AL

Maintenance Technician jobs in Tempe, AZ

Automation Technician jobs in Springfield, MO

Maintenance Technician jobs in Colonial Heights, VA

Instrument Technician jobs in Rush, NY

Ekg Technician jobs in Rockville, MD

Instrument Technician jobs in San Diego, CA

Instrument Technician jobs in Hawaii

Instrumentation Technician jobs in Wyoming

Instrument Technician jobs in Boise, ID

Sterile Processing Technician jobs in Bridgeport, CT

Anesthesia Technician jobs in Switzerland, FL

Qa Automation Europe jobs in Remote

Automation Engineer jobs in Spokane, WA

Automation Engineer jobs in Gainesville, FL

Automation Engineer jobs in Tulsa, OK

Operating Engineer jobs in Chicago, IL

Automation Engineer jobs in Seattle, WA

Automation jobs in Chicago, IL

E&I Technician

ST Tissue, LLC
Barnwell, SC

Quick Apply

Job Details

Full-time
Up to $38.50 an hour

Benefits

Relocation assistance
Health insurance
Dental insurance
401(k)
Paid time off
Employee assistance program
Vision insurance
401(k) matching
Employee discount
Flexible schedule
Referral program

Qualifications

Controlling experience
Electrical blueprint reading
Interpersonal skills
Electrical instrumentation
Manufacturing facility experience
Electrical systems
Class D
Associate's degree
E & I

Full Job Description

Company Overview: Barnwell Tissue Solutions is a key contributor to ST Group’s mission of being the leading supplier of towel, bath tissue, and napkin parent rolls across North America. The Barnwell mill features a 110-inch Valmet hybrid QRT/DCT tissue machine, installed in 2016, with an annual capacity of 30,000 tons. It also houses a 40,000-ton-per-year recycled fiber deinking mill, enabling production of both virgin and recycled tissue. The 300,000-square-foot site includes warehouse space with
room for future expansion

Job Overview:

E&I Level III Journeymen provide daily support for tissue manufacturing operations and are responsible for the installation, maintenance, and troubleshooting of electrical, instrumentation, and communication systems. Papermill industry experience is a plus. The hourly pay rate will depend on the level of experience and education.

Responsibilities:

Adhere to all safety regulations and mill procedures, including the use of personal protective equipment (PPE) such as arc flash gear, fall arrest systems, chemical suits, hard hats, safety glasses, face shields, gloves, and any other necessary equipment to perform job duties safely.
Maintain and troubleshoot electrical power systems, which include 3-phase systems of 2,400V and 480V, as well as single-phase 240/120V and low voltage 5VDC to 90VDC. This work includes, but is not limited to, 3-phase induction motors, synchronous motors, servo motors, and various special motors.
Collaborate with the leadership on the electrical and instrumentation (E/I) maintenance plans and preventive maintenance strategies.
Collaborate with leadership on E/I maintenance field days and outages.
Use PLC and DCS systems to troubleshoot tissue machines, winders, and water systems.
Experience with TMEIC, Allen-Bradley (AB), and ABB drives is preferred.
Apply National Electrical Code (NEC) standards to properly size cables, fuses, and overloads.
Understand both analog and digital communication systems, with work experience in ABB and Bailey DCS preferred.
Be familiar with fiber optic communication systems.
Coordinate with leadership on the installation, configuration, and maintenance of equipment, including motors, motor starters, variable speed drives, and diverse types of switches.
Coordinate the checks and calibration of instruments such as valves, flow meters, and transmitters, including smart devices.
Troubleshoot system issues to determine if they are electrical, instrumentation, or mechanical in nature.
Conduct tuning of instrument control loops.
Be familiar with engineered drawings, including Piping and Instrumentation Diagrams (P&IDs), loop sheets, and motor elementary drawings.
May be assigned to special projects as needed.
Support core teams by assisting in resolving technical issues or repair procedures, coaching maintenance Front Line Leaders (FLLs) as necessary, overseeing Equipment Downtime Procedures (EDP), participating in the Precision Motor Program, Integrated Electrical Projects Management (IEPM), and the Mechanical Working Standards (MWS) team.
Participate in the 5S programs and projects, as necessary.

Mill Operations:

24/7 operations/On-call requirements.
Work rotating shift as needed.
Work holidays, weekends, and nights as needed.
Work extended hours during Outages.

Qualifications, Education, Skills, and /or Experience:

Excellent E&I troubleshooting skills.
3 years’ experience working with electrical systems.
3 years’ experience working with instrumentation systems.
2-year associate's degree in E&I or technical discipline.
Read and interpret P&IDs, electrical drawings, etc.
Collaborator and work well with others.
Proficient with Microsoft Office Suite and Excel.
Strong technical and maintenance background with experience in electrical power distribution and Instrument/Controls.
Proficient with CMMS systems.
Strong verbal and written communication skills.

Key Competencies:

Meticulous
Command Skills
Electrical Aptitude
Managerial Courage
Organizational Skills

Physical Demands:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to:

Frequently: sit, stand, walk, climb stairs, speak and hear clearly, work with others, use keyboard/calculator, and lift to 50 pounds.
Occasionally: ascend/descend stairs, ladders, or ramps, bend forward at the waist, crouch, push, pull, twist, drive, handle, reach above the shoulders, use hand tools, reach below the shoulders, squat, and lift to 20 pounds.
Specific vision: abilities required by the job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus.

Barnwell Tissue provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Pay: Up to $38.50 per hour

Benefits:

401(k)
401(k) matching
Dental insurance
Employee assistance program
Employee discount
Flexible schedule
Health insurance
Paid time off
Referral program
Relocation assistance
Vision insurance

People with a criminal record are encouraged to apply

Experience:

Electrical systems: 3 years (Required)
E & I: 3 years (Required)
Papermill: 2 years (Preferred)

License/Certification:

Class D Drivers License (Required)

Location:

Barnwell, SC 29812 (Preferred)

Ability to Commute:

Barnwell, SC 29812 (Required)

Work Location: In person

Quick Apply

Refine Your Search

dcs technician jobs

E&I Technician

Field Service Programming Engineer

Maintenance Tech II - 2B

Panel Builder

Field Service Technician

Instrumentation & Electrical Technician

Operations Engineer

I&E Technician

Maintenance Technician

IC & E Technician

Electrical Technician

I&E Supervisor

CE

I&E Technician

Automation Engineer

Maintenance Technician

Automation Technician

Controls & Instrumentation Technician

Lead Facility Maintenance Technician

Electrical & Instrumentation Technician

I want to receive the latest job alert for dcs technician

Related Searches

Explore jobs in more locations

Job Seeker Tools

Employer Tools

Browse

Stay Connected