Top 1374 Dcs technician Jobs

E&I Technician
ST Tissue, LLC —Barnwell, SC
- Up to $38.50 an hour
- Extended hours
- Background check
- Ability to walk for extended periods
- Mid-level
- Relocation assistance
- Health insurance
Quick Apply
I&C Technician
Primary Recruiting Services —Paola, KS
- $63 an hour
- Monday to Friday
- Mid-level
- Analysis skills
- Hand tools
- Relocation assistance
- Health insurance
Quick Apply
Instrumentation Technician
Advantage Technical —Luther, OK
- $55 an hour
- Temporary
- Mid-level
- Health savings account
- AD&D insurance
Quick Apply
DCS Technician
N.F. Smith & Associates, L.P. —Houston, TX
- Overtime
- Microsoft Excel
- Microsoft Access
- Microsoft Outlook
Quick Apply
I&E Technician
Energy Transfer Partners —Watford City, ND
- Weekends as needed
- Clean driving record
- Microsoft Outlook
- Construction site
- Profit sharing
- Paid time off
Field Service Technician
Coalmont Engineering —McCalla, AL
- $70,000 - $90,000 a year
- Overtime
- System design
- Mid-level
- 3 years
- Paid holidays
- Health insurance
Quick Apply
Field Service Programming Engineer
Coalmont Engineering —Lake View, AL
- $95,000 - $120,000 a year
- Overtime
- Up to 50% travel
- Bachelor of Science
- System design
- Paid holidays
- Health insurance
Quick Apply
Panel Builder
ICR Resources LLC —Silex, MO
- $31 - $43 an hour
- Full-time
- Microsoft Excel
- Microsoft Outlook
- Mid-level
- Paid holidays
- Health insurance
Quick Apply
Instrumentation & Electrical Technician
POET —Bingham Lake, MN
- $30 - $40 an hour
- Weekends as needed
- Pass drug screening
- Mid-level
- Ability to lift 50 pounds
- Profit sharing
- Wellness program
Quick Apply
Lead Facility Maintenance Technician
Valicor Environmental Services LLC —Adamsville, AL
- Full-time
- Pass drug screening
- Mid-level
- 3 years
Quick Apply
IC & E Technician
Hamilton Liberty, LLC —Towanda, PA
- $45 - $50 an hour
- Extended hours
- Background check
- Heavy equipment operation
- 5 years
- Health savings account
- Health insurance
Quick Apply
I&E Supervisor
Continental Carbon —Ponca City, OK
- Full-time
- Background check
- 5 years
- Mid-level
- Relocation assistance
- Health insurance
Quick Apply
I&E Technician
Energy Transfer Partners —Epping, ND
- Weekends as needed
- Clean driving record
- Microsoft Outlook
- Construction site
- Profit sharing
- Paid time off
Maintenance Technician
Sun Orchard LLC —Tempe, AZ
- Urgently hiring
- Mid-level
- High school diploma or GED
- Ability to lift 50 pounds
- Health insurance
- Dental insurance
Quick Apply
I&E Technician
Continental Carbon —Ponca City, OK
- $59,000 - $64,000 a year
- Weekends as needed
- Background check
- Clean driving record
- Construction site
- Health savings account
- Relocation assistance
Quick Apply
Operations Engineer
Pilot Chemical Co. —Middletown, OH
- Full-time
- Background check
- Computer literacy
- Bachelor of Science
- Health savings account
- Health insurance
Quick Apply
9d
Chemical Operator
FLEXSYS AMERICA —Monongahela, PA
- $34.09 - $40.68 an hour
- Full-time
- Mid-level
- Forklift
- High school diploma or GED
- Wellness program
- Health savings account
Quick Apply
Special Education Teacher
LEARN Academy —Phoenix, AZ
- Classroom
- Experience working with individuals with disabilities
- Master's degree
- Tuition reimbursement
- Referral program
Special Education Teacher
LEARN Academy —Tempe, AZ
- Classroom
- Experience working with individuals with disabilities
- Teaching Certification
- Tuition reimbursement
- Referral program
Maintenance Technician
MGC Advanced Polymers, Inc. —Colonial Heights, VA
- From $30.07 an hour
- Full-time
- Background check
- Word processing
- Engineering
- On-the-job training
Quick Apply

I want to receive the latest job alert for dcs technician

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

Explore jobs in more locations

dcs technician jobs near

Field Service Engineer jobs in Lake View, AL

Maintenance Technician jobs in Tempe, AZ

Special Education Teacher jobs in Tempe, AZ

Maintenance Technician jobs in Colonial Heights, VA

HVAC Technician jobs in Paola, KS

Special Education Teacher jobs in Phoenix, AZ

Operations Engineer jobs in Austin, TX

Operations Engineer jobs in Los Angeles, CA

Operations Engineer jobs in Fort Worth, TX

Director Of Operations In Health Care jobs in New Jersey

Operations Engineer jobs in New York, NY

Ground Operations jobs in Orlando International Airport, FL

Manager jobs in Bellingham, WA

Project Manager jobs in Mooresville, NC

Revenue Cycle Manager jobs in Philadelphia, PA

Office Manager jobs in Erie, PA

Instrument Technician jobs in Detroit, MI

Instrument Technician jobs in Des Moines, IA

Instrument Technician jobs in Indianapolis, IN

Instrument Technician jobs in Asheville, NC

E&I Technician

ST Tissue, LLC
Barnwell, SC

Quick Apply

Job Details

Full-time
Up to $38.50 an hour

Benefits

Relocation assistance
Health insurance
Dental insurance
401(k)
Paid time off
Employee assistance program
Vision insurance
401(k) matching
Employee discount
Flexible schedule
Referral program

Qualifications

Controlling experience
Electrical blueprint reading
Interpersonal skills
Electrical instrumentation
Manufacturing facility experience
Electrical systems
Class D
Associate's degree
E & I

Full Job Description

Company Overview: Barnwell Tissue Solutions is a key contributor to ST Group’s mission of being the leading supplier of towel, bath tissue, and napkin parent rolls across North America. The Barnwell mill features a 110-inch Valmet hybrid QRT/DCT tissue machine, installed in 2016, with an annual capacity of 30,000 tons. It also houses a 40,000-ton-per-year recycled fiber deinking mill, enabling production of both virgin and recycled tissue. The 300,000-square-foot site includes warehouse space with
room for future expansion

Job Overview:

E&I Level III Journeymen provide daily support for tissue manufacturing operations and are responsible for the installation, maintenance, and troubleshooting of electrical, instrumentation, and communication systems. Papermill industry experience is a plus. The hourly pay rate will depend on the level of experience and education.

Responsibilities:

Adhere to all safety regulations and mill procedures, including the use of personal protective equipment (PPE) such as arc flash gear, fall arrest systems, chemical suits, hard hats, safety glasses, face shields, gloves, and any other necessary equipment to perform job duties safely.
Maintain and troubleshoot electrical power systems, which include 3-phase systems of 2,400V and 480V, as well as single-phase 240/120V and low voltage 5VDC to 90VDC. This work includes, but is not limited to, 3-phase induction motors, synchronous motors, servo motors, and various special motors.
Collaborate with the leadership on the electrical and instrumentation (E/I) maintenance plans and preventive maintenance strategies.
Collaborate with leadership on E/I maintenance field days and outages.
Use PLC and DCS systems to troubleshoot tissue machines, winders, and water systems.
Experience with TMEIC, Allen-Bradley (AB), and ABB drives is preferred.
Apply National Electrical Code (NEC) standards to properly size cables, fuses, and overloads.
Understand both analog and digital communication systems, with work experience in ABB and Bailey DCS preferred.
Be familiar with fiber optic communication systems.
Coordinate with leadership on the installation, configuration, and maintenance of equipment, including motors, motor starters, variable speed drives, and diverse types of switches.
Coordinate the checks and calibration of instruments such as valves, flow meters, and transmitters, including smart devices.
Troubleshoot system issues to determine if they are electrical, instrumentation, or mechanical in nature.
Conduct tuning of instrument control loops.
Be familiar with engineered drawings, including Piping and Instrumentation Diagrams (P&IDs), loop sheets, and motor elementary drawings.
May be assigned to special projects as needed.
Support core teams by assisting in resolving technical issues or repair procedures, coaching maintenance Front Line Leaders (FLLs) as necessary, overseeing Equipment Downtime Procedures (EDP), participating in the Precision Motor Program, Integrated Electrical Projects Management (IEPM), and the Mechanical Working Standards (MWS) team.
Participate in the 5S programs and projects, as necessary.

Mill Operations:

24/7 operations/On-call requirements.
Work rotating shift as needed.
Work holidays, weekends, and nights as needed.
Work extended hours during Outages.

Qualifications, Education, Skills, and /or Experience:

Excellent E&I troubleshooting skills.
3 years’ experience working with electrical systems.
3 years’ experience working with instrumentation systems.
2-year associate's degree in E&I or technical discipline.
Read and interpret P&IDs, electrical drawings, etc.
Collaborator and work well with others.
Proficient with Microsoft Office Suite and Excel.
Strong technical and maintenance background with experience in electrical power distribution and Instrument/Controls.
Proficient with CMMS systems.
Strong verbal and written communication skills.

Key Competencies:

Meticulous
Command Skills
Electrical Aptitude
Managerial Courage
Organizational Skills

Physical Demands:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to:

Frequently: sit, stand, walk, climb stairs, speak and hear clearly, work with others, use keyboard/calculator, and lift to 50 pounds.
Occasionally: ascend/descend stairs, ladders, or ramps, bend forward at the waist, crouch, push, pull, twist, drive, handle, reach above the shoulders, use hand tools, reach below the shoulders, squat, and lift to 20 pounds.
Specific vision: abilities required by the job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus.

Barnwell Tissue provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Pay: Up to $38.50 per hour

Benefits:

401(k)
401(k) matching
Dental insurance
Employee assistance program
Employee discount
Flexible schedule
Health insurance
Paid time off
Referral program
Relocation assistance
Vision insurance

People with a criminal record are encouraged to apply

Experience:

Electrical systems: 3 years (Required)
E & I: 3 years (Required)
Papermill: 2 years (Preferred)

License/Certification:

Class D Drivers License (Required)

Location:

Barnwell, SC 29812 (Preferred)

Ability to Commute:

Barnwell, SC 29812 (Required)

Work Location: In person

Quick Apply

Refine Your Search

dcs technician jobs

E&I Technician

I&C Technician

Instrumentation Technician

DCS Technician

I&E Technician

Field Service Technician

Field Service Programming Engineer

Panel Builder

Instrumentation & Electrical Technician

Lead Facility Maintenance Technician

IC & E Technician

I&E Supervisor

I&E Technician

Maintenance Technician

I&E Technician

Operations Engineer

Chemical Operator

Special Education Teacher

Special Education Teacher

Maintenance Technician

I want to receive the latest job alert for dcs technician

Related Searches

Explore jobs in more locations

Job Seeker Tools

Employer Tools

Browse

Stay Connected