Top 267 Facility engineer tech Jobs

Project Design Engineer - Coupling Technology
Victaulic —Easton, PA
- Full-time
- Bachelor of Science
- Office
- Analysis skills
Engineer II - Electrical - Test Systems
BAE Systems Inc. —Westminster, CO
- $79,365 - $134,921 a year
- Full-time
- Bachelor of Science
- Mid-level
- Office
- Health savings account
- Paid holidays
Materials Technology Project Engineer - Rubber/Elastomer Formulation
Victaulic —Easton, PA
- Full-time
- Bachelor of Science
- Mid-level
- Office
- Paid holidays
- Disability insurance
Systems Engineer (Mid-Level)
Relative Dynamics —Sioux Falls, SD
- Full-time
- Background check
- Mid-level
- In-person
- Paid holidays
- Disability insurance
Quick Apply
Advanced Human Factors Engineer
General Dynamics Mission Systems, Inc —Pittsfield, MA
- $112,924 - $122,187 a year
- Urgently hiring
- Hybrid work
- System design
- 3 years
- Master's degree
Sr. Advanced FPGA/Firmware Engineer
General Dynamics Mission Systems, Inc —Middletown, RI
- $155,000 - $165,000 a year
- Full-time
- Hybrid work
- 6 years
- Master's degree
- Linux
Senior Principal Systems Engineer – IFC Management
Northrop Grumman —San Diego, CA
- $142,200 - $213,400 a year
- Overtime
- Military
- Bachelor of Science
- Doctor of Philosophy
- Paid holidays
- Disability insurance
Electrical Design/Firmware Engineer II
TTM Technologies —Farmingdale, NY
- $99,092 - $165,154 a year
- Full-time
- Mid-level
- Electrical Engineering
- Health savings account
- Paid holidays
2d
System Test Engineer /Principal System Test Engineer
Northrop Grumman —San Diego, CA
- $91,800 - $171,000 a year
- Overtime
- Bachelor of Science
- Laboratory experience
- Mid-level
- Paid holidays
- Disability insurance
Sentinel - Staff Systems Engineer - 18014
Northrop Grumman —Huntsville, AL
- $169,000 - $253,600 a year
- Overtime
- Master's degree
- Bachelor's degree
- Doctor of Philosophy
- Paid holidays
- Disability insurance
Sentinel Specialty Systems Engineering HSI UX Section Manager 2- 18042
Northrop Grumman —Huntsville, AL
- $153,800 - $230,800 a year
- Overtime
- Master's degree
- Travel
- Mentoring
- Paid holidays
- Disability insurance
Facility Operations Center Engineer, ADC InfraOps FOC
Amazon Data Services, Inc. —Arlington, VA
- $37 - $65 an hour
- Overtime
- Engineering
- Mid-level
- Experience equivalent to degree accepted
- AD&D insurance
- Health insurance
Data Center Facility Engineer
Peraton —Quantico, VA
- $80,000 - $128,000 a year
- Extended hours
- 5 years
- Bachelor of Science
- Mid-level
- Health savings account
- Paid holidays
Embedded Systems Engineer
Thea Energy —Kearny, NJ
- $110,000 - $150,000 a year
- Weekends as needed
- 5 years
- Master's degree
- Ability to lift 50 pounds
- Health insurance
- Dental insurance
Quick Apply
Facilities Engineer
FiberLight LLC —Allen, TX
- 8 years
- Product management
- Contracts
Quick Apply
Staff Engineer, eSSD Memory System Architecture
Sandisk —Milpitas, CA
- Full-time
- Bachelor of Science
- Writing skills
- System design
- Health savings account
- AD&D insurance
Quick Apply
CDMA 3G Core Services Engineer
Logic Rule —Overland Park, KS
- $31.64 - $35.04 an hour
- Customer service
- US work authorization
- Senior level
Test Engineer HMI ECU
Daimler Truck North America —Portland, OR
- $78,000 - $100,000 a year
- Full-time
- Hybrid work
- Computer science
- Computer Science
- Pass drug screening
- Paid parental leave
- Paid holidays
Control Systems Integrator
Muth Electric, Inc. —Sioux Falls, SD
- Team management
- Budgeting
- Senior level
Quick Apply
Wireless Engineer w Travel - SECRET Clearance
ActioNet —Vienna, VA
- Up to $250,000 a year
- Full-time
- Remote
- Computer Science
- 5 years
- System design
- Paid holidays
- Disability insurance
Quick Apply

I want to receive the latest job alert for facility engineer tech

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

Explore jobs in more locations

facility engineer tech jobs near

Project Design Engineer - Coupling Technology

Victaulic -
Easton, PA

Apply Now

Job Details

Full-time

Qualifications

3D modeling software
Numerical modeling
3D modeling for product design
Structural modeling
FEA
Simulation tools
3D modeling
Hand tools
Parts modeling

Full Job Description

Job Description

Position: Project Design Engineer - Coupling Technology

Location: Product Development, Corporate Engineering- Easton, PA

Reports to: Senior Manager of Coupling Technology - Engineering

**Relocation package is offered for this role**

*This position is not eligible for Visa Sponsorship*

*This position is onsite at our Global HQ in Easton, PA*

Victaulic is a global leader in mechanical pipe joining innovations and is the world's leading producer of mechanical pipe joining solutions. The company has 13 manufacturing facilities and 28 branches worldwide with 4,400 employees who speak 43 languages across the globe. With over 2000 global patents, Victaulic solutions are at work in more than 140 countries across diverse business lines including oil and gas, chemical, mining, power generation, water and wastewater treatment, military and marine, as well as commercial building and fire protection. Since the 1950’s Victaulic has been providing ground-breaking fire protection products and system solutions for challenges faced by engineers, contractors, property managers and fire marshals. Victaulic is a leading fire protection manufacturer of innovative fire products and fire fighting systems including fire sprinklers, fire extinguishing and fire suppression systems, pipe couplings and fittings, and flow control valves. These products are used in commercial, infrastructure and industrial applications to protect people and property.

Scope:

Responsible for the development and maintenance of commercially successful Victaulic products and equipment. These products include: New and revised products for Victaulic and its subsidiaries.

Responsibilities include but are not limited to:

Responsible for concept development which often includes:

Concept generation.
Specific design ideas to satisfy concept(s).
Presentation and communication of ideas.
Modeling of concept (via drawings and hardware).
Interfacing with Product Managers/Marketing/Sales to refine concept to meet customer requirements.
Addressing manufacturing, sourcing, and quality requirements.
Estimating cost of initial design. Developing alternatives to achieve product cost targets.
Project and/or procurement authorization preparation and comprehensive presentation to management.

Leading of a multi-departmental team (formal or informal) in the execution of detailed design through the release of product to market including:

Design to meet requirements and manufacturability issues.
Detail drawing review and approval.
Vendor selection participation (in-house or out).
Prototyping.
Testing against requirements.
Solving design problems.
Scrutiny and review of detailed cost estimates.
Leading a design review to assure customer and performance requirements are met.
Resolving tolerance issues.
Development of EI/EP/ES's as appropriate.
Participation in tooling selection.
Approval of tooling-based on samples.
Participation in evaluation of pilot production runs and problem solving.
Technical literature preparation and approval.
Education/training of Victaulic Marketing/Sales and Application Engineering about new product.

Responsible for aiding Application Engineering in the usage recommendation of existing Product Technology products.

Specific policies and procedures have been established by the Engineering Department to provide for the security and accessibility of electronic data and confidential information. It is the responsibility of the employee, in the daily course of doing business, to follow said policies as they relate to document management. The extent to which departmental research and development information is stored electronically has vastly increased, and will continue to do so. The new Federal rules pertaining to electronic discovery stipulate that substantive email communications constituted "records" under the Federal Records Act. It is therefore the responsibility of each departmental employee to understand their role in communicating via e-mails and that all e-mails must be written/responded to in a professional manner..

Monthly travel to agencies, vendors, manufacturing sites in support of assigned projects.

Contribute to future new product ideas, which will benefit Victaulic and positively differentiate Victaulic from our competition (Vision).

Qualifications:

BS / MS in appropriate engineering field.
5-10 years of commercially successful Product Technology or related experience.
Knowledge and Experience with Pressure Vessels, Piping, Fluid Control Devices, and/or Pumps preferred.
Multiple, successful, cross-functional project management experiences inclusive of taking projects from concept to production.
Creative, able to generate concepts with good potential that meet project requirements.
Demonstrated business acumen and communication skills.
FEA (Finite Element Analysis) experience required; Abaqus preferred.
3D CAD software proficiency required; SolidWorks preferred.
Familiarity with Geometric Dimensioning and Tolerancing (GD&T).
Familiarity with a variety of manufacturing processes including injection molding, casting, machining, welding, and 3D printing.
Familiarity with designing using elastomers, plastics, composites, and metals.
Preferred familiarity with design optimization and automation via parametric study and scripting (Python).
Comfortable working in a laboratory environment; proficient with hand tools and light machinery, with strong hands-on skills and practical engineering judgment.
Experience incorporating AI-assisted tools (e.g., generative design, machine learning-based simulation, or AI-driven CAD workflows) into the engineering design process to improve efficiency, accelerate iteration, and optimize product performance.
Proficiency in mathematical modeling of complex mechanical designs and loading conditions, including analytical methods and numerical techniques for evaluating stress, fatigue, pressure, and dynamic loads in piping and coupling systems.

Victaulic Staffing Partner Communication Policy

All staffing agencies are strictly forbidden from directly contacting any Victaulic employees, except those within the Human Resources/Talent Acquisition team. All communications, inquiries and candidate submissions must be routed through Victaulic's Human Resources/Talent Acquisition team. Non-compliance with this policy may result in the suspension of partnership, cancellation of the current contract, and/or the imposition of a mandatory probation period before any future business can resume. Additionally, non-compliance may lead to a permanent ban on future business. This policy ensures a streamlined and compliant recruitment process

#TOP123 #LI-JT1 #LI-ONSITE

Apply Now

Refine Your Search

facility engineer tech jobs

Project Design Engineer - Coupling Technology

Engineer II - Electrical - Test Systems

Materials Technology Project Engineer - Rubber/Elastomer Formulation

Systems Engineer (Mid-Level)

Advanced Human Factors Engineer

Sr. Advanced FPGA/Firmware Engineer

Senior Principal Systems Engineer – IFC Management

Electrical Design/Firmware Engineer II

System Test Engineer /Principal System Test Engineer

Sentinel - Staff Systems Engineer - 18014

Sentinel Specialty Systems Engineering HSI UX Section Manager 2- 18042

Facility Operations Center Engineer, ADC InfraOps FOC

Data Center Facility Engineer

Embedded Systems Engineer

Facilities Engineer

Staff Engineer, eSSD Memory System Architecture

CDMA 3G Core Services Engineer

Test Engineer HMI ECU

Control Systems Integrator

Wireless Engineer w Travel - SECRET Clearance

I want to receive the latest job alert for facility engineer tech

Related Searches

Explore jobs in more locations

Job Seeker Tools

Employer Tools

Browse

Stay Connected