Top 1305 Machine operator Jobs in Brea, Ca

Machine Operator / CNC Machinist - 1st Shift (5:00am-1:00pm)
Pankl Aerospace —Cerritos, CA
- $28 - $30 an hour
- Full-time
- 5 years
- Computer literacy
- English
- Health insurance
- Dental insurance
Quick Apply
10d
Machine Operator – $25-$27/hr – Anaheim, CA (1st Shift)
Staffing Services, Inc —Anaheim, CA
- $25 - $27 an hour
- Full-time
- Basic math
- English
- In-person
Quick Apply
4d
Production Team Lead- Packaging Department
Great Hire —Brea, CA
- $23 - $24 an hour
- Overtime
- Mid-level
- Supervising experience
- Leadership
Quick Apply
9d
CNC Machine Operator
Job Source —Santa Ana, CA
- $25 - $35 an hour
- Temporary
- Mid-level
- Forklift
- In-person
Quick Apply
5d
Machine Operator - 2nd shift
Cargill —Fullerton, CA
- $23 an hour
- Overtime
- 18 years or older
- Computer literacy
- English
- Wellness program
- Paid holidays
10d
Machine Operator 2nd Shift
triPAQ Packaging, A Division of New-Indy —Cerritos, CA
- $24 - $29 an hour
- Full-time
- 18 years or older
- High school diploma or GED
- Computer skills
Quick Apply
8d
Machine Operator
Mission Foods —Rancho Cucamonga, CA
- From $25.04 an hour
- Full-time
- Basic math
- Ability to lift 50 pounds
- Fair chance
- Paid training
- AD&D insurance
Quick Apply
1d
Additive Manufacturing Technician (1st shift)
Divergent —Los Angeles, CA
- $27 - $50 an hour
- Rotating shift
- Ability to lift 50 pounds
- Continuous improvement
- Mentoring
- Paid parental leave
- Paid holidays
Quick Apply
Machine Operator
AERO-CLASSICS HEAT TRANSFER PRODUCT —La Verne, CA
- $20 - $32 an hour
- High school diploma or GED
- Ability to lift 50 pounds
- Hand tools
Quick Apply
Machinist
FirstElement Fuel —Santa Ana, CA
- $32 - $45 an hour
- Full-time
- Schematics
- 5 years
- Mid-level
- Health insurance
- Dental insurance
Quick Apply
CNC Operator - C Shift
Rocket Lab Corporation —Long Beach, CA
- $35 - $50 an hour
- Extended hours
- CAD
- US work authorization
- 1 year
Quick Apply
Packager
Kloeckner Metals Corporation —Santa Fe Springs, CA
- $45,448 a year
- Forklift
- High school diploma or GED
- Pre-employment physical examination
Quick Apply
5d
Machine Operator / CNC Machinist - 2nd Shift (1:00pm - 9:00pm)
Pankl Aerospace —Cerritos, CA
- $28.00 - $31.50 an hour
- Full-time
- 5 years
- Computer literacy
- English
- Health insurance
- Dental insurance
Quick Apply
10d
CNC Machinist
Laborup —Anaheim, CA
- $28 - $35 a year
- Overtime
- Mid-level
- 3 years
- In-person
- Health insurance
- Dental insurance
Quick Apply
9d
CNC Machinist 5 Axis Mill - 2nd Shift
Acra Aerospace —Anaheim, CA
- $25 - $30 an hour
- Full-time
- Background check
- Computer literacy
- Basic math
- Health insurance
- Dental insurance
Quick Apply
Lead CNC Lathe Machinist
Rubicon Gear —Corona, CA
- $27 - $35 an hour
- Overtime
- Quality control
- In-person
- Senior level
- Health insurance
- Dental insurance
Quick Apply
5d
CNC Lathe Setup Machinist - Nights
Gramercy Aerospace —Gardena, CA
- $20 - $35 an hour
- Overtime
- Mid-level
- In-person
- Health insurance
- 401(k)
Quick Apply
9d
CNC Grinder Machinist
Catalyst Hydraulic Machining —La Verne, CA
- $23 - $38 an hour
- Full-time
- Mid-level
- Power tools
- Welding
- Health insurance
- Dental insurance
Quick Apply
7d
Machine Operator / CNC Machinist - 3rd Shift (9:00pm - 5:00am)
Pankl Aerospace —Cerritos, CA
- $28 - $34 an hour
- Full-time
- 5 years
- Computer literacy
- English
- Health insurance
- Dental insurance
Quick Apply
3d
Direct-Hire - CNC Machinist - III & IV - Up to $39.70/hr*
SolomonEdwards —Monrovia, CA
- $29 - $39 an hour
- Overtime
- Background check
- Mid-level
- In-person
- Paid holidays
- Health insurance
Quick Apply

I want to receive the latest job alert for machine operator in brea, ca

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

Explore jobs in more locations

machine operator jobs near brea, ca

Machine Operator / CNC Machinist - 1st Shift (5:00am-1:00pm)

Pankl Aerospace
Cerritos, CA

Quick Apply

Job Details

Full-time
$28 - $30 an hour
10 days ago

Benefits

Health insurance
Dental insurance
401(k)
Paid time off
Parental leave
Employee assistance program
Vision insurance
401(k) matching
Life insurance
Referral program
Retirement plan

Qualifications

Mechanical blueprint interpretation
Computer operation
Machine setup
Equipment setup (production tasks)
Blueprint specification interpretation
CNC lathe
Stress management
Computer literacy
Monitoring dimensions
5S
Machining tool setup
English
Shop math
High school diploma or GED
Manufacturing standard operating procedures
CNC milling machine
Dimensional measurements
CNC quality inspection
Precision measurement in machining
Computer skills
Operational excellence initiatives
Manufacturing
Quality improvement programs in engineering
Hand tools
Manufacturing company experience
CNC
AS9100
CNC machining

Full Job Description

FIRST SHIFT: 5:00 AM - 1:00 PM

Summary

The Machine Operator is responsible for operating various equipment from hand tools, CNC machines, manual machines and any other machines necessary to meet the needs and schedules handed down from the Production Manager to the respective Shift Supervisor for whom the Machinist reports to.

Required Qualifications

Education and/or experience consisting of a high school diploma or equivalent, and minimum 5 years’ experience in Manufacturing machining operations required.
Basic, Intermediate or Advance Machining Certificate or (Equivalent Experience)
Aerospace Experience preferred
Machinist capable of setting up and operating manual and/or machining equipment per setup sheet, engineering instructions, work instructions, etc.
Communication skills required consists of the ability to read and interpret documents such as: (a) safety rules, (b) preventative maintenance instructions, (c) procedure instructions, (d) complex blueprints, (e) work order documents (f) engineering work instructions (g) setup sheets
Basic computer skills
Basic shop math
Able to read and write English proficiently
Able to write routine reports and correspondence
Understanding of GD&T measurement units
Able to measure and record dimensions per sketches and ICL requirements
Use of inspection tools, such as, but not limited to: Height gages, Bore gages, Radius gages, Dial calipers, Flapper gages, Scales, Veneer, Micrometers, Ultrasonic gages, Ring gages, Plug gages, Use of wires to check threads, Use of snap gages, Optical comparator
Ability to work in a team environment
Able to work under pressure in fast pace environment to meet daily targets
Must be “solution” oriented and able to systematically resolve problems
Must have good attendance & punctuality history and reliable
Must be able to think on your feet and seek assistance in a timely manner
Experience with 5S and continuous improvement practices
Experience with AS9100 and aerospace industry requirements
Knowledge of flight safety procedures
Ability of working interdisciplinary and according to the requirements of the process
Must have a “Can Do Attitude” and able to execute plans

Essential Duties and Responsibilities (Other duties may be assigned)

Know and execute PAS Management system procedures
Familiar with company’s products and processes
Carryout / execute activities assigned by Shift Supervisor according to PAS Management Standards. This may include, although not limited to: (a) training, (b) planning, (c) production requirements, (d) daily work assignments, (e) resolving problems, (f) communicating with Apprentices, (g) assist in prioritizing and scheduling
Ability to setup and operate CNC lathes, CNC Mills (up to 5 axis), CNC Hobber, CNC Cylindrical Grinder, and CNC Mill Turn machines
Ability to read and understand CAM programs (G & M Codes) preferred
Ability to setup and operate manual machines, including but not limited to conventional lathes, honing, and manual thread grind
Read and interpret blueprints, engineering drawings, and work instructions to determine specifications
Execution of the schedules, including tooling requirements
Meet the needs of production from the Shift Supervisor without exceeding the daily shift patterns established
Participate in RCCA process and take necessary steps to implement when called to do so
Comply with daily shift pattern
Execute the machine preventative maintenance program (PMP)
Utilization, reporting and recording of data using ERP
No quality “escape” within the cell
Report any problems in production that will hinder your ability to meet the daily production immediately to the Lead man and/or shift supervisor
Operation of equipment to satisfy requirements set by Shift Supervisor
Recommend process improvements through the submission of engineering change orders
Cross-training of employees
Perform other duties as assigned

Export Compliance

To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Physical Demands and Work Environment

While performing the duties of this Job, the employee needs to be aware that this position is physically straining. The ability to cope with stress and multiple tasks is essential. Employee is regularly required to sit and talk or hear. The employee is frequently required to use hands and fingers, handle, or feel and reach with hands and arms. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is occasionally exposed to risk of electrical shock. The noise level in the work environment is usually moderate.

Job Type: Full-time

Pay: $28.00 - $30.00 per hour

Benefits:

401(k)
401(k) matching
Dental insurance
Employee assistance program
Health insurance
Life insurance
Paid time off
Parental leave
Referral program
Retirement plan
Vision insurance

Work Location: In person

Quick Apply

Refine Your Search

machine operator jobs in brea, ca

Machine Operator / CNC Machinist - 1st Shift (5:00am-1:00pm)

Machine Operator – $25-$27/hr – Anaheim, CA (1st Shift)

Production Team Lead- Packaging Department

CNC Machine Operator

Machine Operator - 2nd shift

Machine Operator 2nd Shift

Machine Operator

Additive Manufacturing Technician (1st shift)

Machine Operator

Machinist

CNC Operator - C Shift

Packager

Machine Operator / CNC Machinist - 2nd Shift (1:00pm - 9:00pm)

CNC Machinist

CNC Machinist 5 Axis Mill - 2nd Shift

Lead CNC Lathe Machinist

CNC Lathe Setup Machinist - Nights

CNC Grinder Machinist

Machine Operator / CNC Machinist - 3rd Shift (9:00pm - 5:00am)

Direct-Hire - CNC Machinist - III & IV - Up to $39.70/hr*

I want to receive the latest job alert for machine operator in brea, ca

Related Searches

Explore jobs in more locations

Job Seeker Tools

Employer Tools

Browse

Stay Connected