Top 242 Phy test engineer Jobs

Sr. Hardware Engineer-North Carolina
Allied Telesis —Cary, NC
- $110,000 - $130,000 a year
- Full-time
- 6 years
- Research
- Mentoring
Quick Apply
Senior Embedded Systems Engineer
Micro Control Company —Fridley, MN
- $111,123 - $123,470 a year
- Full-time
- System design
- Mid-level
- Master's degree
- Profit sharing
- Health savings account
Quick Apply
Senior Electrical Engineer
Excelon Solutions —Sunnyvale, CA
- $50 - $100 an hour
- Contract
- Background check
- 8 years
- Analysis skills
Quick Apply
2d
PHY Design Verification Engineer
Apple —San Francisco Bay Area, CA
- $175,000 - $308,500 a year
- Bachelor of Science
- Data analysis skills
- Analysis skills
- Employee stock purchase plan
- Health insurance
Software/Firmware Engineers
spChips —Carlsbad, CA
- System design
- Mid-level
- 3 years
RF Design Validation Test Engineer ("DVT")
Movandi Corp —Newport Beach, CA
- 5 years
- Laboratory experience
- Senior level
Quick Apply
Senior Software Engineer (5G PHY Layer)
Globalstar Inc. —San Diego, CA
- Computer Science
- 5 years
- Bachelor of Science
Quick Apply
Principal Test Engineer
Arm —Austin, TX
- $249,900 - $338,100 a year
- Email
- 11+ years
- Continuous improvement
- Senior level
6d
RFIC Layout Engineer
Apple —Irvine, CA
- $137,500 - $250,700 a year
- Bachelor of Science
- 3 years
- Bachelor's degree
- Employee stock purchase plan
- Health insurance
High Speed PHY FW Engineer
Cadence Design Systems —San Jose, CA
- $101,500 - $188,500 a year
- Full-time
- Bachelor of Science
- Mid-level
- Electrical Engineering
- Employee stock purchase plan
- Paid holidays
8d
RFIC Design Engineer
Apple —Irvine, CA
- $175,000 - $308,500 a year
- Bachelor of Science
- Master's degree
- Analysis skills
- Employee stock purchase plan
- Health insurance
Electrical Test Engineer
Wipro Limited —Redmond, WA
- $45,000 - $121,000 a year
- Pass drug screening
- Mid-level
- 3 years
- Disability insurance
- Health insurance
WSoC PHY/MAC Validation and Integration Engineer
Apple —San Francisco Bay Area, CA
- $175,000 - $308,500 a year
- Bachelor of Science
- Bachelor's degree
- Senior level
- Employee stock purchase plan
- Health insurance
Staff Verification Engineer
FLC Technology Group —Santa Clara, CA
- Master's degree
- Senior level
- Electrical Engineering
Principal Engineer DSP PHY Digital Design
Infineon Technologies AG —Dallas, TX
- Full-time
- Hybrid work
- Background check
- Bachelor of Science
- Pass drug screening
Senior Software Development Engineer
Broadcom —San Jose, CA
- $101,000 - $162,000 a year
- Full-time
- Computer Science
- Schematics
- 5 years
- Employee stock purchase plan
- Paid holidays
Modem Chipset Field Test Engineer
BTI Solutions, Inc. —Irvine, CA
- $24 - $100 an hour
- Extended hours
- Computer science
- Computer Science
- Bachelor of Science
Quick Apply
7d
Principal PHY SerDes Validation Engineer
Marvell —Santa Clara, CA
- $150,680 - $225,700 a year
- Computer Science
- 3 years
- Master's degree
- Employee stock purchase plan
Digital IC Design Engineer
Neuralink —South San Francisco, CA
- $116,000 - $233,800 a year
- Full-time
- Computer science
- Computer Science
- 5 years
- Commuter assistance
- Paid holidays
Hardware/ Software Co-Design Engineer
Neuralink —South San Francisco, CA
- $151,000 - $261,000 a year
- Full-time
- Computer science
- Computer Science
- Bachelor of Science
- Commuter assistance
- Paid holidays

I want to receive the latest job alert for phy test engineer

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

Explore jobs in more locations

phy test engineer jobs near

Sr. Hardware Engineer-North Carolina

Allied Telesis -
Cary, NC

Quick Apply

Job Details

Full-time
$110,000 - $130,000 a year

Qualifications

Network topology design
Power electronics circuit design
Electrical compliance testing
Thermal control
Embedded systems
Research
Network infrastructure
Digital circuit design
Power distribution systems
Low-voltage electrical systems
Design engineering
Printed circuit board (PCB) layout
Product design
Cross-functional collaboration
Cross-functional communication

Full Job Description

Job Summary:

Perform electrical hardware design of printed circuit board assemblies for harsh environment Layer 2 and Layer 3 Industrial Ethernet Switches. Execute hardware verification on new products. Lifecycle support of products from inception to end of life, addressing any field issues that are not managed by the field support personnel. Provide input into Manufacturing processes so product may be successfully manufactured with low overhead. Analyze and interpret new product requirements to ensure design projects meet commercial objectives.

Essential Duties and Responsibilities:

Product design of Layer 2 and Layer 3 access and distribution network switches fully qualified for power utilities, oil and gas, industrial automation and process control, railway transportation (trackside), roadway transportation (traffic control), digital video recording (surveillance cameras), and any installation in outdoor applications.
- DIN-Rail and rack mount design with natural convection (no fans) to survive -40C to 75C outside ambient temperature.
- Design to meet high levels of electromagnetic immunity (10Vrms conducted, and 10V/m radiated), and high levels of lightning surge (4kV).
- Product design of interfaces include the following:
  - DC input and power entry design (24Vdc, 48Vdc, and 110Vdc systems).
  - 10/100/1000Base-T Ethernet.
  - Power over Ethernet (PoE) up to IEEE 802.3bt (95W/port).
  - Fiber optic uplink supporting 100Base-FX, 1000Base-X, 10GBase-SR, 10GBase-LR, 10GBase-ER, and 10GBase-CX4.
Digital circuit board level design.
Low voltage power supply design.
24Vdc, 48Vdc, and 110Vdc power entry design.
Power over Ethernet (PoE) design.
Analog circuit design.
Design of embedded CPU and/or System on a Chip (SoC) complex with DDR3/DDR4 SDRAM, and Flash memory.
Design using Ethernet Switch and PHY IC’s.
Write functional specification, detailed specification, manufacturing test plan and designer test plan/results documents on all products that are developed.
Interpret product requirement documents and translate into design requirements.
Research and select new components to meet design requirements.
Perform power and thermal calculations, and interface with Mechanical Design Engineer for optimal component placement floor plan to aid in thermal simulations.
Provide guidance to PCB layout designer to implement bare PCB design.
Provide EMC specific guidelines to PCB layout designer to meet EMC requirements.
Interact with PCB supplier to design proper PCB stack up, ensuring all design requirements are properly met.
Consider manufacturing limitations and constraints during the design and development of the product to meet Design for Manufacturing (DFM), Design for Test (DFT), and Product Structure Checklist (PSC).
Perform hardware bring up and designer test activities on new designs.
Correct any issues identified during product compliance activities.
Perform system level HW testing to validate proper functionality over the entire operational range of the product.
Perform EMC testing in the lab and support formal EMC compliance testing.
Interact with suppliers and available resources to obtain new knowledge applicable to responsibilities. Share new knowledge with team members.
Provide weekly reports to management on project status and issues.
Review designs of other HW team members in a constructive manner.
Troubleshoot field and factory issues that cannot be resolved by the first level support teams.

Experience, Skills & Abilities:

6+ years with analog and digital design experience.
6+ years with 24Vdc to 110Vdc power and low voltage power design.
Required experience to be considered:
24Vdc to 110Vdc power entry design
Low voltage power supply design

EMC (design and testing for compliance)
Embedded CPU, microprocessor or System on a Chip design
Networking design (1Gb and 10Gb Ethernet copper and optical, Switching, PHY’s, etc)

Experience with Industrial temperature product design.
Experience with programmable logic a plus.
Proficient with schematic entry.
Experience with PCB layout techniques and concepts for high-speed design and EMI compliance.
Experience in designing products to meet Class A and B EMI requirements.
Experience in designing products that meet harsh outdoor environment.
Experience troubleshooting problems and identifying solutions.
Knowledge of industrial temperature design.
Mentoring junior engineers.
Typically reports to manager or head of a department.
Must be able to work independently, receiving a minimum of detailed supervision.
Must be able to maintain professional demeanor during stressful situations.
Must be able to interact positively and productively across functions within the organization.
Must be able to take ownership of responsibilities and actions and effectively handle interpersonal relationships with others.
Must be able to receive and apply feedback to improve performance.
Must be able to prioritize, plan work activities, and use time efficiently.
Must be able to maintain regular, predictable attendance.
Must be able manage shifting priorities and to consistently meet commitments and deadlines.
Must be able to work effectively with multiple interruptions and distractions.
Must be able to commit to necessary hours of work to reach goals.

Education / Training:

BSEE/BSCE

Quick Apply

Refine Your Search

phy test engineer jobs

Sr. Hardware Engineer-North Carolina

Senior Embedded Systems Engineer

Senior Electrical Engineer

PHY Design Verification Engineer

Software/Firmware Engineers

RF Design Validation Test Engineer ("DVT")

Senior Software Engineer (5G PHY Layer)

Principal Test Engineer

RFIC Layout Engineer

High Speed PHY FW Engineer

RFIC Design Engineer

Electrical Test Engineer

WSoC PHY/MAC Validation and Integration Engineer

Staff Verification Engineer

Principal Engineer DSP PHY Digital Design

Senior Software Development Engineer

Modem Chipset Field Test Engineer

Principal PHY SerDes Validation Engineer

Digital IC Design Engineer

Hardware/ Software Co-Design Engineer

I want to receive the latest job alert for phy test engineer

Related Searches

Explore jobs in more locations

Job Seeker Tools

Employer Tools

Browse

Stay Connected