What You Will Do
This position is open for external candidates only to apply.
This position will be filled at either the Process and Sampling Technician 2 or 3 level, depending on the skills of the selected candidate. Additional job responsibilities (outlined below) will be assigned if the candidate is hired at the higher level.
You will work as part of the Radiation Instrumentation and Calibration Team in the Radiation Protection Services Group at Los Alamos National Laboratory. This team supports the Radiation Protection Program by maintaining, calibrating, troubleshooting and developing radiation protection instrumentation. Duties will include supporting the test, evaluation, maintenance, and calibration processes for fixed and portable alpha, beta, neutron, photon, and tritium radiation protection instruments. As a member of the team, you will maintain accurate computerized and written calibration records and other pertinent documentation. You will interact with team staff members, health physicists and radiological control technicians.
This position may require shift work. #ShiftWork
Process and Sampling Tec-2 Level, Salary Range: ($54,900 - $84,300)
At this level, a Process and Sampling Tec-2 will be responsible for repair and calibration of radiation protection instrumentation using electronic test equipment and radioactive sources.
- Sets up, calibrates, operates, maintains, and repairs a wide variety of precise and complex radiation detection instrumentation.
- Assists in troubleshooting issues or concerns in instrument functions or performance
- Assists in precision measurements, tests, and inspections on instruments to determine their conformance to regulatory and procedural specifications.
- Assists with validations, measurements and/or experimental results, and validations, measurements and/or experimental results.
- Assists with the preparation of procedures.
- Implements assigned corrective actions.
- Identifies trends in instrument performance that may require recalibration or servicing of the instrument/equipment.
- Provides solutions to a variety of technical problems of moderate scope and complexity.
- Assigned broad work assignments based on verbal instruction from supervisor or project leader, self-initiates work on daily basis.
- Use and interpret moderately complex assembly drawings to determine orientation and arrangement of parts, components, cabling and/or circuitry.
Process and Sampling Tec-3 Level, Salary Range: ($60,500 - $93,600)
In addition to what was outlined at the lower level, at this position is responsible for developing, implementing, and evaluating processes, procedures, and applications.
- Conducts and/or manages precision measurements, tests, and inspections on instruments to determine their conformance to regulatory and procedural specifications.
- Validates and authenticates measurements.
- Assists with the development of calibration and/or measurement techniques for new or one-of-a-kind instruments.
- Identifies trends in instrument performance that require recalibration or servicing of the instrument/equipment.
- Performs non-routine tasks requiring the exercise of independent judgment.
- Provides solutions to a variety of technical problems of sophisticated scope and complexity.
- Provides on-the-job training to junior technicians.
What You Need
Minimum Job Requirements:
- Basic knowledge of physics, chemistry, mathematics, and/or electronics principles.
- Experience in the maintenance and repair of instrumentation.
- Experience operating a variety of testing and/or inspection equipment.
- Experience with analog and digital electronic troubleshooting and repair at the board and component level.
- Skill in the preparation and presentation of test-measurement results.
- Ability to respond quickly and effectively to emerging issues.
- Demonstrated oral and written communication skills
- Demonstrated ability to follow technical procedures.
- General knowledge of common and unique work hazards and occupational safety practices
- Basic computer skills. (Word, Excel, PowerPoint, Teams.
- An excellent record of dependability, availability, attendance, and punctuality is essential.
- Ability to work independently and in a team environment with minimal supervision.
- Demonstrated commitment to safety, security, quality and excellent customer service.
- Applicant must have the ability to obtain a Q, which normally requires U.S. citizenship.
Additional Job Requirements for Process and Sampling Tec-3 Level:
In addition to the requirements outlined above, qualification at the higher level requires:
- Understanding and wide application of technical principles, theories, and concepts related to instrumentation and testing equipment.
- Knowledge and experience with electrical repair.
- Familiarity in monitoring the performance of qualified instruments for trends that may require the recalibration or servicing of the instrument.
- Ability to work independently and as well as collaboratively as part of a team.
Education/Experience at the Process and Sampling Tec-2 Level: This TEC-2 position requires a High School Diploma or equivalent and a minimum of 3 years of related experience or, an equivalent combination of education and experience directly related to the position.
Education/Experience at the Process and Sampling Tec-3 Level: This TEC-3 position requires an Associate's Degree and 3 years of experience; or, an equivalent combination of education and experience directly related to the occupation.
Desired Qualifications:
- Experience in testing, evaluation, repair and calibration of alpha- and beta-radiation radiation protection instrumentation (portable survey instruments, personnel contamination monitors, and continuous air monitors)
- Familiarity with the principles and practices of radiation detection and measurement.
- Experience in circuit-board level diagnosis and repair using standard equipment such as voltmeters, oscilloscopes, and soldering irons.
- Utilize computers, high voltage/low-current power supplies, pulse generators, other test equipment and radioactive sources to test and/or calibrate electronic equipment.
Essential Job Functions (can perform with or without reasonable accommodation): Fine motor actions with hands in tight spaces, work on hands and knees, stooping, crouching, sitting, standing, walking, reaching down, and applying torque with hands or arms.
Work Environment: Work near sources of non-ionizing and ionizing radiation, Work near electrical power supplies, Wear headgear or head protection, safety glasses, hearing protection, gloves or hand protection, safety glasses, safety shoes or protective footgear, face shield or facial protection.
Work Location: The work location for this position is onsite and located in Los Alamos, NM. All work locations are at the discretion of management.
Position commitment: Regular appointment employees are required to serve a period of continuous service in their current position in order to be eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the time required, they may only apply for Laboratory jobs with the documented approval of their Division Leader. The position commitment for this position is 1 year.
Work Schedule: This position may require shift work. Employees may be eligible for shift differential pay when assigned by their manager. Shift assignments are at the discretion of the manager.
Note to Applicants: Due to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission functions and operations of national security laboratories and nuclear weapons productions facilities, which includes Los Alamos National Laboratory.
Where You Will Work
Located in beautiful northern New Mexico, Los Alamos National Laboratory (LANL) is a multidisciplinary research institution engaged in strategic science on behalf of national security. Our generous benefits package includes:
- PPO or High Deductible medical insurance with the same large nationwide network
- Dental and vision insurance
- Free basic life and disability insurance
- Paid childbirth and parental leave
- Award-winning 401(k) (6% matching plus 3.5% annually)
- Learning opportunities and tuition assistance
- Flexible schedules and time off (PTO and holidays)
- Onsite gyms and wellness programs
- Extensive relocation packages (outside a 50 mile radius)
Additional Details
Directive 206.2: Employment with Triad requires a favorable decision by NNSA indicating employee is suitable under NNSA Supplemental Directive 206.2. Please note that this requirement applies only to citizens of the United States. Foreign nationals are subject to a similar requirement under DOE Order 142.3A.
Clearance: Q (Position will be cleared to this level). Selected applicants will be subject to a background investigation conducted by or on behalf of the Federal Government, and must meet eligibility requirements* for access to classified matter. This position requires a Q clearance and obtaining such clearance requires US Citizenship except in extremely rare circumstances. Dependent upon the position, additional authorization to access classified information may be required, which may or may not be available to dual citizens. Receipt of a Q clearance and additional access authorization ultimately is a decision of the Federal Government and not of Triad.
- Eligibility requirements: To obtain a clearance, an individual must be at least 18 years of age; U.S. citizenship is required except in very limited circumstances. See DOE Order 472.2 for additional information.
New-Employment Drug Test: The Laboratory requires successful applicants to complete a new-employment drug test and maintains a substance abuse policy that includes random drug testing. Although New Mexico and other states have legalized the use of marijuana, use and possession of marijuana remain illegal under federal law. A positive drug test for marijuana will result in termination of employment, even if the use was pre-offer.
Regular position: Term status Laboratory employees applying for regular-status positions are converted to regular status.
Equal Opportunity: Los Alamos National Laboratory is an equal opportunity employer and supports a diverse and inclusive workforce. All employment practices are based on qualification and merit, without regard to race, color, national origin, ancestry, religion, age, sex, gender identity, sexual orientation, marital status or spousal affiliation, physical or mental disability, medical conditions, pregnancy, status as a protected veteran, genetic information, or citizenship within the limits imposed by federal laws and regulations. The Laboratory is also committed to making our workplace accessible to individuals with disabilities and will provide reasonable accommodations, upon request, for individuals to participate in the application and hiring process. To request such an accommodation, please send an email to
[email protected] or call 1-505-664-6947 option 2.
Apply
