Dana Corp.-TennesseeEstimated: $23,000 - $33,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Performs setup and changeover of dies and walking beams. Performs a repetitive forming operation on different blanks to form various sized housing halves....

Workbox Staffing-Plymouth, MIEstimated: $23,000 - $32,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

The Die Setter/General Support is responsible for die set of manual and automated metal stamping presses. Qualifications for Die Setter/General Support position...

CEMCO-Pittsburg, CA $13 - $14 an hour

Involving the removal and replacement of tooling rolls, cut off dies, punch dies, table spacers, die springs, excess materials left behind, die blades, shims,...

Jabil-Atlanta, GAEstimated: $55,000 - $77,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Completes routing forms. Ensure all injection molding, tool and assembly changeover activites are completed as scheduled along with appropriate line clearance...

Wausau Coated Products-Wausau, WI $15 an hour

The Die Cut Press Operator is responsible for running a Die Cutting Press to include daily start-up, production runs, clean-ups and shutdowns....

BorgWarner-Bellwood, ILEstimated: $33,000 - $45,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Technicians will maintain the tooling, die carts and repair area. Perform changeovers, calibrate ATMs, re-teach servo operated automation, adjust hydraulic...

Cascade Coffee Inc-Everett, WAEstimated: $22,000 - $32,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

See attached Physical Demand Job Analysis form. Observes physical changeover of product on the machine. MACHINE OPERATOR - PACKING I PRODUCTION SUPERVISOR....

Arrow Fastener Company, LLC.-Saddle Brook, NJEstimated: $40,000 - $53,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

O Perform die changeover as needed. Proficient at precision machining and form grinding. Tool Die Maker Class A – 1st Shift Schedule:. M-F / 8:00 AM-4:30 PM....

Multimatic-Butler, INEstimated: $29,000 - $37,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Assist technical services in machine repair, changeover, setup and operation as required. Multimatic Indiana - Butler is looking for a Tool and Die Repair...

Whirlpool Corporation-Amana, IAEstimated: $28,000 - $39,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Complete setup and changeovers. Form parts in rotovac machine. Make complete set-up changeovers which include installation of molds and plugs....

Martinrea International Inc.-Springfield, TNEstimated: $36,000 - $49,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Co-ordinate changeover with production operators. Adjust shut-heights, cushion pressure on form and draw dies and set progress on feeders....

California Expanded Metal-Pittsburg, CA $13 - $14 an hour

Involving the removal and replacement of tooling rolls, cut off dies, punch dies, table spacers, die springs, excess materials left behind, die blades, shims,...

QuickCable Corporation-Franksville, WIEstimated: $38,000 - $50,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Understanding of die casting a must. Disassemble and cleans die sets and components. Tool Room Technicians set up and prepare die cast tooling for production...

Johnson Controls-Wichita, KSEstimated: $24,000 - $33,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Perform die changeovers and select correct materials to run. To perform die changeovers and setups and to operate single stroke mechanical presses 70 tons and...

Multimatic-Butler, INEstimated: $25,000 - $35,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Machine repair and die changeover. Properly use time and complete all forms as required. The Maintenance Repair Person will also assist with setup and...

The Superior Die, Tool & Machine Company-Columbus, OHEstimated: $37,000 - $51,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Die Maintenance / Die Repair - 1st Shift. We are currently seeking a Die Maintenance / Die Repair for our first (1st ) shift....

Pridgeon & Clay-Grand Rapids, MI $27 - $35 an hour

Create die changeover instructions, die repairs, and end of run issues, ensuring CAD data and die books are updated, and Managers are notified of any issues....

The Malish Corporation-Mentor, OHEstimated: $27,000 - $35,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Adjusts zone and die heat temperatures, line speed and water pressure as necessary. Completes all required records, reports, and forms in a neat, accurate and...

Pridgeon & Clay-Grand Rapids, MI $26 - $34 an hour

Create die changeover instructions, die repairs, and end of run issues, ensuring CAD data and die books are updated, and Team Leaders are notified of any issues...

TE Connectivity-Greensboro, NCEstimated: $21,000 - $29,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Thread up die and locate strip and restart press. They perform changeovers and setups according to production schedule, perform quality checks according to...

CEMCO-Pittsburg, CA $13 - $14 an hour

Involving the removal and replacement of tooling rolls, cut off dies, punch dies, table spacers, die springs, excess materials left behind, die blades, shims,...

Workbox Staffing-Plymouth, MIEstimated: $23,000 - $32,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

The Die Setter/General Support is responsible for die set of manual and automated metal stamping presses. Qualifications for Die Setter/General Support position...

Act Resources-Bowling Green, KY $12 - $13 an hour

Complete changeovers and ability to make adjustments. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form....

The Malish Corporation-Mentor, OHEstimated: $27,000 - $35,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Adjusts zone and die heat temperatures, line speed and water pressure as necessary. Completes all required records, reports, and forms in a neat, accurate and...


Your Recent Searches