ISC Constructors, LLC - Houston, TX4

Primary responsibility of the QA/QC Inspector is to inspect all Instrument and Electrical installations to insure they are in accordance with the drawings,...

Estimated: $42,000 - $53,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Interplex NAS, Inc - Northvale, NJ3

Be able to calibrate simple measurement instruments (calipers, micrometers) following written procedures....

Estimated: $28,000 - $37,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Sponsored

Craft Machine Works - Hampton, VA

Perform the calibration of measuring instruments. Craft Machine Works is currently looking for a Quality Inspector to work with our growing QA Department...

Estimated: $27,000 - $36,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Sponsored

Vermes Machine Co. Inc. - Moorestown, NJ

Blue print reading, inspection instruments, tolerancing, GD&T, etc. Has a full time opening in the Quality Department for an experienced Inspector....

Estimated: $33,000 - $48,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Sponsored

ISC Constructors, LLC - Baton Rouge, LA4

Primary responsibility of the QA/QC Inspector is to inspect all Instrument and Electrical installations to insure they are in accordance with the drawings,...

Estimated: $43,000 - $57,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Vendor Control Service - Sterling, VA

Ability to use magnifying instruments. Quality Control Inspector Candidate should have experience with test operations and electronic components....

$25 - $30 an hour

TJ Aerospace, Inc. - Garden Grove, CA

Quality Assurance Inspector:. Ability to use precision measuring instruments and calibrations. Quality Assurance Inspector will be responsible for performing...

Estimated: $35,000 - $46,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

GKN Aerospace - Orangeburg, SC3.2

Ability to use simple measuring instruments such as tape measures, micrometers, scales, calipers and vernier gages required....

Estimated: $34,000 - $47,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Stellar Energy Americas - Jacksonville, FL

Certified Welding Inspector. AWS Certified Weld Inspector. Lifts and carries measuring instruments, tools, and test equipment;...

$27 - $31 an hour

Systemart LLC - Wichita, KS4.2

Inspectors to perform travel work on 737 line. Work across equivalent or lower level Inspector job codes as required....

$30 - $35 an hour

Southern Tube LLC - Houston, TX

Inspects threads on joints of steel casings to detect defects and to determine conformance to specified tolerances in taper, lead, and threads per inch, using...

Estimated: $22,000 - $30,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Systemart LLC - Wichita, KS4.2

Assemby Inspectors (Weekends). All Inspectors will test out of training. Inspectors to perform travel work on 737 line....

$50 an hour

GP&C - Houston, TX3.6

5-10 years experience as a machine job shop inspector. Dimensionally inspects machined parts using a variety of measuring and gauging instruments....

Estimated: $26,000 - $33,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

City of Concord - Concord, NC4.1

Operating testing equipment and instruments; The purpose of this position is to collect and test water samples and install, inspect, test, repair, and replace...

Estimated: $32,000 - $45,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Minnesota Department of Transportation - Saint Paul, MN4.6

Aviation safety and legal compliance inspector for a governmental agency; Commercial Pilot Certificate with Instrument rating or Airline Transport Pilot...

$55,000 - $82,000 a year

Warmelin Precision Products - Buena Park, CA

Near acuity and accommodation as required for reading MOT, blue prints, machine dial gauges, and precision measuring instruments used in the inspection of parts...

Estimated: $34,000 - $46,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

HGA Pipeline Services - Midland, TX

6+ years of experience as a Coating Inspector. Knowledge of operating various coating inspection instruments and equipment. Position Summary & Duties:....

$25 - $30 an hour

TECT - Santa Fe Springs, CA3.6

Seeking high-energy experienced inspector to. We have an immediate opening for an Inspector - 2nd Shift. Skilled in proper inspection techniques using precision...

Estimated: $35,000 - $45,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Village of Schaumburg - Schaumburg, IL4.3

Capable of operating instruments, tools, and equipment that are job related and/or as directed. Utilizes special tools, instruments, equipment, etc. as...

$27 - $30 an hour

Site Work Specialists - Rapid City, SD

Must be knowledgeable in layout and operation of the line instrument and transit. Communicate with Project Manager, Owners, Architects, Engineers and Inspectors...

$22 - $27 an hour

1st St. NW Technical Staffing - Plymouth, MN

Busy engineering/manufacturing company has 2 immediate Quality Inspector openings. Candidate will operate a CMM as well as use instruments such as calipers,...

$20 - $25 an hour

1st St. NW Technical Staffing - Plymouth, MN

Busy engineering/manufacturing company has 2 immediate Quality Inspector openings. Candidate will operate a CMM as well as use instruments such as calipers,...

$20 - $25 an hour

Federal Aviation Administration - United States4.1

Aviation Safety Inspector positions have job-related medical requirements. Professional flying skill as demonstrated in a flight check to Commercial Pilot...

$97,000 a year

United Gear and Assembly - Hudson, WI

Measure dimensions of products to verify conformance to specifications, using measuring instruments such as calipers, gauges or micrometers....

$17 an hourSponsored

CHawk Technology - Hayward, CA

CQI (Certified Quality Inspector) desirable. We serve equipment manufacturers in semiconductor, electronics, medical, biomedical, solar, green energy, oil & gas...

Estimated: $39,000 - $53,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Sponsored

Beitzel Corporation - Grantsville, MD3.3

Beitzel Corporation is now accepting applications for a full-time Electrical Inspector. The Electrical Inspector will inspect job sites to ensure that...

Estimated: $51,000 - $72,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Sponsored