BIRMINGHAM FASTENERS - Birmingham, AL 3.5

Ensure all instruments and devices used to verify dimensions of products (ring gages, calipers, micrometers, tape measures etc.)....

Estimated: $23,000 - $30,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Interplex NAS, Inc - Northvale, NJ 3.2

Be able to calibrate simple measurement instruments (calipers, micrometers) following written procedures....

Estimated: $27,000 - $36,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Sponsored

Craft Machine Works - Hampton, VA 

Perform the calibration of measuring instruments. Craft Machine Works is currently looking for a Quality Inspector to work with our growing QA Department...

Estimated: $27,000 - $36,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Sponsored

Seabrook Medical, LLC - Seabrook, NH 

Proficient with surface plate technology, shop math, and mechanical inspection instruments, and blueprints. Seabrook Medical is a leading contract manufacturer...

Estimated: $37,000 - $50,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Sponsored

Systemart LLC - Wichita, KS 4.2

Inspectors to perform travel work on 737 line. Work across equivalent or lower level Inspector job codes as required....

$30 - $35 an hour

Acro Manufacturing - Cedar Rapids, IA 3

Understanding of inspection methods and measurement instruments such as , Bore gages, Calipers, Micrometers. We are looking to add a tool crib attendant/backup...

$17 - $20 an hour

BOEING - Auburn, WA 4

Sell completed job or in-process checks to inspector at appropriate steps in sequence. Auburn,Washington,United States 20104 Mechanics in this position drill,...

Estimated: $34,000 - $47,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Intertek - Amelia, LA 3.5

Conducts inspections to ensure proper preservation of electrical, instrument, and telecom components. Measures dimensions to verify conformance to specification...

Estimated: $54,000 - $77,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Spark Talent Acquisition - Macomb, MI 3.1

Our client in Macomb is looking to hire a high-level Quality Inspector who has manual layout experience....

$18 - $25 an hour

Woodhaven - Coolidge, GA 3.6

Applies established inspection procedures and use simple inspection tools and instruments. The inspector is required to collaborate with the continuous...

Estimated: $26,000 - $32,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Recruiter Exchange Inc. - Carrollton, TX 

Must be able to use precision measuring instruments and equipment. Recruiter Exchange is looking to hire a QA inspector to inspect raw materials for dimensions...

$14 - $16 an hour

KARL STORZ - Charlton, MA 3.9

Knowledge of basic mechanical measurement instruments, including microscopes. Primary duty is to perform functional, visual, and dimensional final inspection of...

Estimated: $35,000 - $47,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

PierSide Coatings Inc - Seattle, WA 

PierSide Coatings Inc is seeking candidates for NACE Inspectors. Has "expert knowledge" of corrosion, surface preparation, cleanliness, environmental conditions...

$25 - $50 an hour

Vendor Control Service - Sterling, VA 

Ability to use magnifying instruments. Quality Control Inspector Candidate should have experience with test operations and electronic components....

$25 - $30 an hour

Kurt Manufacturing Company - Minneapolis, MN 4.1

Instruments and gages. Inspector A – 1st Shift. Need for an Inspector A at our Pueblo, Colorado facility. Performance of complicated equipment, instruments or...

Estimated: $34,000 - $45,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Taylor Oilfield Manufacturing Inc. - Broussard, LA 

No bench inspectors need apply. Is looking for an experienced QC Inspector w/ 5- Minimum yrs. Must be able to use and set all shop instruments, OD micrometers,...

Estimated: $40,000 - $53,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Bitec Machining - Dayton, OH 

Capable of performing inspection(s) of product to blue prints and specifications using standard measuring instruments such as....

$16 - $19 an hour

Nipro PharmaPackaging Americas - Chase City, VA 4.4

Effectively utilize the tools by reading and understanding article drawings and packaging specification sheets, and use instruments such as calipers, dial...

$10 - $11 an hour

Systemart LLC - Wichita, KS 4.2

Assemby Inspectors (Weekends). All Inspectors will test out of training. Inspectors to perform travel work on 737 line....

$50 an hour

Titeflex Aerospace - Laconia, NH 

Inspects, adjusts, and verifies accuracy of gauges and measuring instruments for conformance to specifications....

Estimated: $29,000 - $40,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Metallized Carbon Corporation - Ossining, NY 3.6

Inspectors-Manufacturing (dimensional inspection, measuring instruments – calipers, micrometers , etc. ), newly graduated Engineers, individuals with...

$12 an hour

Tegra Medical - Hernando, MS 3.3

Minimum of 1 year of inspection experience using precision measuring instruments. Accurately perform measurements using calipers, micrometers, optical...

Estimated: $23,000 - $31,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Honeywell - Kansas City, MO 3.8

Sets up and operates all types of inspection instruments, including gages and multi-axis computerized measuring machines....

Estimated: $36,000 - $48,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Ferrotherm Corporation - Cleveland, OH 3.1

You must also perform multiple inspection operations using precision measuring instruments such as micrometers, dial indicators, CMM and other gauges....

Estimated: $25,000 - $33,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Sponsored

Magnetic Seal Corp. - Warren, RI 

May use precision measuring instruments such as calipers, micrometers, gauges, and other inspection equipment....

Estimated: $32,000 - $44,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Sponsored

Source-Ray, Inc - Ronkonkoma, NY 

Ability to use simple measuring instruments. Suffolk County medical equipment manufacturer seeks experienced QC Inspector....

Estimated: $35,000 - $47,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Sponsored