ISC Constructors, LLC - Baton Rouge, LA4

Primary responsibility of the QA/QC Inspector is to inspect all Instrument and Electrical installations to insure they are in accordance with the drawings,...

Estimated: $43,000 - $57,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

United Gear and Assembly - Hudson, WI

Measure dimensions of products to verify conformance to specifications, using measuring instruments such as calipers, gauges or micrometers....

$17 an hourSponsored

Interplex NAS, Inc - Northvale, NJ3

Be able to calibrate simple measurement instruments (calipers, micrometers) following written procedures....

Estimated: $28,000 - $37,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Sponsored

Vermes Machine Co. Inc. - Moorestown, NJ

Blue print reading, inspection instruments, tolerancing, GD&T, etc. Has a full time opening in the Quality Department for an experienced Inspector....

Estimated: $33,000 - $48,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Sponsored

ISC Constructors, LLC - Houston, TX4

Primary responsibility of the QA/QC Inspector is to inspect all Instrument and Electrical installations to insure they are in accordance with the drawings,...

Estimated: $42,000 - $53,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

GKN Aerospace - Orangeburg, SC3.2

Ability to use simple measuring instruments such as tape measures, micrometers, scales, calipers and vernier gages required....

Estimated: $34,000 - $47,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

vScenario, LLC - San Diego, CA

Inspectors will be able to*. Perform field test using specialized instruments and field test equipment. We are experiencing tremendous growth in the San Diego...

$35 - $40 an hour

Vendor Control Service - Sterling, VA

Ability to use magnifying instruments. Quality Control Inspector Candidate should have experience with test operations and electronic components....

$25 - $30 an hour

Winegrape Inspection Program, Inc. - Fresno, CA

Technical Capacity o Utilize standard mechanical and electrical instruments including computer. This position ensures the inspection quality of Grapes for Wine...

$12 - $18 an hour

Winegrape Inspection Program, Inc. - Turlock, CA

Technical Capacity o Utilize standard mechanical and electrical instruments including computer. This position ensures the inspection quality of Grapes for Wine...

$12 - $18 an hour

HGA Pipeline Services - Midland, TX

6+ years of experience as a Coating Inspector. Knowledge of operating various coating inspection instruments and equipment. Position Summary & Duties:....

$25 - $30 an hour

Systemart LLC - Wichita, KS4.2

Assemby Inspectors (Weekends). All Inspectors will test out of training. Inspectors to perform travel work on 737 line....

$50 an hour

Berry Global, Inc - Evansville, IN3.5

Certified Mechanical Inspector. Be able to read measuring instruments such as micrometers, etc. Defined in Level III procedures, Inspectors are responsible for...

Estimated: $24,000 - $33,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Systemart LLC - Wichita, KS4.2

Inspectors to perform travel work on 737 line. Work across equivalent or lower level Inspector job codes as required....

$30 - $35 an hour

Stellar Energy Americas - Jacksonville, FL

Certified Welding Inspector. AWS Certified Weld Inspector. Lifts and carries measuring instruments, tools, and test equipment;...

$27 - $31 an hour

LOCKHEED MARTIN CORPORATION - Trumbull, CT4.1

Experienced in performing dimensional inspection using precision instruments. Use precision measuring instruments and gages such as feeler gages, dial...

Estimated: $40,000 - $53,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

365 Staffing - Toledo, OH

Performs layouts on CMM, Cordax and other instruments. Performs dimensional analysis using Manual & DCC-CMM, optical comparator and other lab instruments....

$22 an hour

Minnesota Department of Transportation - Saint Paul, MN4.6

Aviation safety and legal compliance inspector for a governmental agency; Commercial Pilot Certificate with Instrument rating or Airline Transport Pilot...

$55,000 - $82,000 a year

HNTB Corporation - Arlington, VA3.8

DCR Erosion and Sediment Control Inspector Level. Learns the use of level and survey instruments. Inspector trainee initially is not required to have any...

Estimated: $47,000 - $66,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

MARTINIC ENGINEERING - Stanton, CA5

Measures dimensions, such as length, height, and distance, between reference points, using precision instruments such as micrometers, calipers, dial indicator,...

$52,000 - $54,000 a year

FlexSteel Pipeline Technologies - Baytown, TX3.7

Has strong knowledge of measuring instruments such as calipers, micrometers and gauge blocks. We are now hiring for an experienced QC Inspector for our Baytown...

$15 - $18 an hour

LOCKHEED MARTIN CORPORATION - Fort Worth, TX4.1

Or, four years experience as an inspector on a production line; Requires final inspection and operational checking of one or more specialized systems such as...

Estimated: $38,000 - $49,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Veterans Affairs, Veterans Health Administration - Portland, OR3.9

Remove trays of instruments and equipment; Inspects items to ensure gross contamination has been removed and instruments are functioning properly.Operates...

$40,000 - $51,000 a year

Radiac Abrasives, Inc. - Oswego, IL

Measure product with various measuring instruments. Ability to use various measuring instruments proficiently....

Estimated: $30,000 - $38,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Sponsored

Ferrotherm Corporation - Cleveland, OH3.1

You must also perform multiple inspection operations using precision measuring instruments such as micrometers, dial indicators, CMM and other gauges....

Estimated: $25,000 - $33,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Sponsored

Interstate McBee - Cleveland, OH

Addition, subtraction, multiplication, division, fractions and decimals in order to read understand blue prints and operate measurement instruments....

Estimated: $27,000 - $36,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Sponsored