Construction Testing Services LLC - Las Vegas, NV

Construction Testing Services LLC has several open positions for steel shop inspectors. Must have current CWI, and Level II Ultrasonic Testing, Magnetic...

$65,000 - $110,000 a year

Welding Consultants, LLC - Columbus, OH

The Certified Welding Inspector (CWI)/Level II NDT Technician performs routine to difficult field and fabrication shop inspections....

Estimated: $40,000 - $58,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Sponsored

PTTI - Educational Institution - Philadelphia, PA

Advise fab shop employees when pre-heats are required. Monitor and look for ways to improve shop safety. Proven ability to understand shop drawings and review...

$35 - $45 an hourSponsored

The Crosby Group - Tulsa, OK

Must be able to operate Jib cranes, Mag, UT equipment, and overhead hoists. This position requires 2-5 years of Magnetic particle (certified to Level II) and...

Estimated: $57,000 - $80,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Sponsored

Construction Testing Services LLC - Schofield, WI

Construction Testing Services LLC has several open positions for steel shop inspectors. Must have current CWI, and Level II Ultrasonic Testing, Magnetic...

$65,000 - $110,000 a year

Construction Testing Services LLC - Springfield, MO

Construction Testing Services LLC has several open positions for steel shop inspectors. Must have current CWI, and Level II Ultrasonic Testing, Magnetic...

$65,000 - $110,000 a year

Intertek - Rome, NY3.5

VT & UT level II certifications. ESSENTIAL DUTIES AND RESPONSIBILITIES....

Estimated: $41,000 - $58,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Bureau Veritas - Newark, NJ3.8

Certified Welding Inspector (CWI). MUST have NDT certifications (MT, RT, UT). Communication with the Project Manager, fabrication shops, contractors, and other...

Estimated: $85,000 - $120,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Cole Technologies Group - New York, NY4

We are currently seeking an experienced Certified Welding Inspector. CWI-AWS or ICC Structural Steel Welding Inspector with a minimum of 3 years experience in...

Estimated: $51,000 - $69,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Pennoni - Sacramento, CA4.2

NDT certifications are a plus, particularly MT, UT. Monitoring work for compliance with approved shop drawings and specifications....

Estimated: $48,000 - $66,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Matrix Service Company - Oklahoma4.2

Should have a strong working knowledge of shop and field welding processes. The QA/QC Lead performs surveillance and monitoring of subcontractor activities to...

Estimated: $46,000 - $60,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

StandardAero - Houston, TX3.7

(Honeywell TFE 731 series shop experience preferred). The Inspector, A&P Airframe, exhibits sound and accurate judgment....

Estimated: $43,000 - $58,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Oceaneering - United States3.9

Additional certifications of other NDT methods preferred, i.e. MT, UT, RT, ET. Assure Nondestructive Testing (NDT) inspections are in compliance with customer...

Estimated: $28,000 - $39,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

BP Aerospace - Irving, TX

We operate in the Aerospace field as well as the Marine & Industrial space working with the airlines, engine overhaul shops as well as original manufacturers...

$50,000 - $60,000 a year

CVR Energy - Coffeyville, KS

Perform vendor shop inspections and provide onsite project inspections. Responsible for quality assurance and quality control throughout the refinery including...

Estimated: $50,000 - $67,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Vigor, LLC - Clackamas, OR

AWS Certified Welding Inspector (preferred). Quality Assurance Engineer....

Estimated: $48,000 - $71,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Three Saints Bay, LLC - Chesapeake, VA

UT, RT, Certification are a plus. Once certified as an Amee Bay NDT Level II inspector, duties would include in shop and on ship NDT inspections, Quality...

Estimated: $54,000 - $70,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Bureau Veritas - Eau Claire, WI3.8

Certified Welding Inspector (CWI), MT, PT, UT, RT Film Interpretation. LOCAL INSPECTOR REQUIRED:. MUST have NDT certifications (MT, PT, UT and RT Film...

Estimated: $46,000 - $59,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Bureau Veritas - Wausau, WI3.8

Certified Welding Inspector (CWI), MT, PT, UT, RT Film Interpretation. LOCAL INSPECTOR REQUIRED:. MUST have NDT certifications (MT, PT, UT and RT Film...

Estimated: $43,000 - $63,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

St. George Steel a Division of Innova Global, Inc. - Saint George, UT

Can read and understands shop detailed drawings. Minimum 5 years experience in steel shop fabrication, or equivalent education....

Estimated: $37,000 - $48,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Komatsu - Longview, TX4

Coordinates visits by third-party inspectors. ASNT Level II Certification in UT, MT and PT required. Demonstrated knowledge of hardness testers, Sonatest, UT...

Estimated: $33,000 - $48,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Bureau Veritas - Pittsburgh, PA3.8

Mechanical Inspector (Pressure Equipment/Piping). Able to provide oversight, mentorship and supervision of the inspectors (JG3)....

Estimated: $72,000 - $100,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

The Dow Chemical Company - United States4

Infrequently perform external fabrication shop inspections and related QA as needed. Lead network of site NDE/Inspection focal points (qualified inspectors,...

Estimated: $72,000 - $100,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

St. George Steel a Division of Innova Global, Inc. - Saint George, UT

Can read and understands shop detailed drawings. Minimum 5 years experience in steel shop fabrication, or equivalent education....

Estimated: $37,000 - $48,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Sponsored

BP Aerospace - Irving, TX

We operate in the Aerospace field as well as the Marine & Industrial space working with the airlines, engine overhaul shops as well as original manufacturers...

$50,000 - $60,000 a yearSponsored

3rd Gen Machine - Logan, UT

Perform inspections, checks, tests, and sampling procedures on parts and components in a production CNC machine shop....

$12 - $19 an hourSponsored