Construction Testing Services LLC - Schofield, WI 

Construction Testing Services LLC has several open positions for steel shop inspectors. Must have current CWI, and Level II Ultrasonic Testing, Magnetic...

$65,000 - $110,000 a year

Welding Consultants, LLC - Columbus, OH 

The Certified Welding Inspector (CWI)/Level II NDT Technician performs routine to difficult field and fabrication shop inspections....

Estimated: $40,000 - $58,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Sponsored

PTTI - Educational Institution - Philadelphia, PA 

Advise fab shop employees when pre-heats are required. Monitor and look for ways to improve shop safety. Proven ability to understand shop drawings and review...

$35 - $45 an hourSponsored

St. George Steel a Division of Innova Global, Inc. - Saint George, UT 

Can read and understands shop detailed drawings. Minimum 5 years experience in steel shop fabrication, or equivalent education....

Estimated: $37,000 - $48,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Sponsored

Construction Testing Services LLC - Las Vegas, NV 

Construction Testing Services LLC has several open positions for steel shop inspectors. Must have current CWI, and Level II Ultrasonic Testing, Magnetic...

$65,000 - $110,000 a year

Construction Testing Services LLC - Springfield, MO 

Construction Testing Services LLC has several open positions for steel shop inspectors. Must have current CWI, and Level II Ultrasonic Testing, Magnetic...

$65,000 - $110,000 a year

Ninyo & Moore - San Diego, CA 

Current NDT Level II technician certified in UT, MT, PT required. Duties will include shop and field inspection of structural steel welds, bolting, and NDT...

Estimated: $43,000 - $63,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Oceaneering - United States 3.9

Additional certifications of other NDT methods preferred, i.e. MT, UT, RT, ET. Assure Nondestructive Testing (NDT) inspections are in compliance with customer...

Estimated: $28,000 - $39,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Stainless Tank, Inc. - Chattanooga, TN 

Ability to cover for Receiving and Outsource inspectors as needed. Ability to perform UT thickness measurements as required on Received Material....

$20 - $23 an hour

The Dow Chemical Company - Pittsburg, CA 4

Infrequently perform external fabrication shop inspections and related QA as needed. Lead network of site NDE/Inspection focal points (qualified inspectors,...

Estimated: $83,000 - $110,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

The Dow Chemical Company - Midland, MI 4

Infrequently perform external fabrication shop inspections and related QA as needed. Lead network of site NDE/Inspection focal points (qualified inspectors,...

Estimated: $71,000 - $100,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

The Dow Chemical Company - United States 4

Infrequently perform external fabrication shop inspections and related QA as needed. Lead network of site NDE/Inspection focal points (qualified inspectors,...

Estimated: $72,000 - $100,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Groupe SGS France - Freeport, TX 

Additional NDE certification are considered an asset (MT, PT, RT, UT). Verify familiarity with requirements of PCC-1 (Bolted Flange Joint Assembly), PCC-2...

Estimated: $50,000 - $71,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Intertek - Rome, NY 3.5

VT & UT level II certifications. ESSENTIAL DUTIES AND RESPONSIBILITIES....

Estimated: $41,000 - $58,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

SWS-Trimac, Inc. - Township of Kochville, MI 

X-Ray and/or UT:. Knowledge of RT and UT techniques. Job Shop or Prototype experience a plus. Is an Engineering company that specializes in providing electron...

Estimated: $31,000 - $41,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

St. George Steel a Division of Innova Global, Inc. - Saint George, UT 

Can read and understands shop detailed drawings. Minimum 5 years experience in steel shop fabrication, or equivalent education....

Estimated: $37,000 - $48,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

University of Texas at Austin - Austin, TX 4.3

Licensed as a Customer Service Inspector. Assists other technicians as needed in the accomplishment of shop goals related to key performance indicators....

$4,100 a month

LOCKHEED MARTIN CORPORATION - Dallas, TX 4.1

O Experience in an overhaul shop or repair station environment is desired. O Current Level II NDT certification per NAS 410 in RT (Radiography) and UT...

Estimated: $39,000 - $49,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

The Crosby Group - Arlington, TX 

Must be able to operate Jib cranes, Mag, UT equipment, and overhead hoists. This position requires 2-5 years of Magnetic particle (certified to Level II) and...

Estimated: $31,000 - $41,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Alberici Enterprises - St. Louis, MO 

Certified Associate Welding Inspector (CAWI) certification is required at a minimum, although a Certified Welding Inspector (CWI) certification is strongly...

Estimated: $37,000 - $48,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Bureau Veritas - Newark, NJ 3.8

Certified Welding Inspector (CWI). MUST have NDT certifications (MT, RT, UT). Communication with the Project Manager, fabrication shops, contractors, and other...

Estimated: $85,000 - $120,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

The Crosby Group - Tulsa, OK 

Must be able to operate Jib cranes, Mag, UT equipment, and overhead hoists. This position requires 2-5 years of Magnetic particle (certified to Level II) and...

Estimated: $57,000 - $80,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

PTTI - Educational Institution - Philadelphia, PA 

Advise fab shop employees when pre-heats are required. Monitor and look for ways to improve shop safety. Proven ability to understand shop drawings and review...

$35 - $45 an hour

The Crosby Group - Tulsa, OK 

Must be able to operate Jib cranes, Mag, UT equipment, and overhead hoists. This position requires 2-5 years of Magnetic particle (certified to Level II) and...

Estimated: $57,000 - $80,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Sponsored

BP Aerospace - Irving, TX 

We operate in the Aerospace field as well as the Marine & Industrial space working with the airlines, engine overhaul shops as well as original manufacturers...

$50,000 - $60,000 a yearSponsored

Union Tank Car Company (UTLX) - Cleveland, TX 3.5

Training and certification of shop technicians and inspectors. Perform audits of inspectors and inspecting work performed....

Estimated: $53,000 - $70,000 a year

Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to the SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.

Sponsored