Top 1002 Adecco Jobs | SimplyHired

CNC Programmer - Manufacturing
Adecco —Schofield, WI
- $70,000 - $85,000 a year
- Full-time
- Mid-level
- 3 years
- Military encouraged
- Health insurance
- Dental insurance
Quick Apply
10d
Radiologist
Adecco —Rochester, NY
- $450,000 - $650,000 a year
- Full-time
- Military encouraged
- Fair chance
- Senior level
- Relocation assistance
- Paid time off
Quick Apply
Manufacturing
Adecco USA, Inc. —Owatonna, MN
- $20 - $30 an hour
- Temporary
- Assembly
- Military encouraged
- Fair chance
- Commuter assistance
- Paid holidays
5d
MRI Technologist
Adecco —Bonita Springs, FL
- $40 - $50 an hour
- Full-time
- Mid-level
- Military encouraged
- Fair chance
- Retirement plan
Quick Apply
Radiologic Technologist
Adecco —Rochester, NY
- $28 - $42 an hour
- Full-time
- Mid-level
- Military encouraged
- Fair chance
- Paid time off
Quick Apply
Tailor
Adecco —Cambridge, MA
- $25 - $35 an hour
- Mid-level
- Military encouraged
- Fair chance
- Paid time off
Quick Apply
Buyer
Adecco —Port Washington, WI
- $55,000 - $65,000 a year
- Mid-level
- Military encouraged
- Fair chance
Quick Apply
4d
Forklift Operator
Adecco —Milford, NH
- $19.00 - $20.50 an hour
- Contract
- Mid-level
- Military encouraged
- Organizational skills
- Commuter assistance
- Paid holidays
Quick Apply
Controller - Manufacturing
Adecco —Schofield, WI
- $120,000 - $160,000 a year
- Full-time
- Military encouraged
- Organizational skills
- Fair chance
- Health insurance
- Dental insurance
Quick Apply
10d
Manufacturing Quality Auditor (Entry Level)
Adecco —Foothill Ranch, CA
- $21.09 - $24.75 an hour
- Urgently hiring
- Military encouraged
- Fair chance
- Communication skills
- Commuter assistance
- Paid holidays
Quick Apply
5d
Test Technician - 3rd Shift
Adecco —Waukesha, WI
- $35.70 an hour
- Ability to walk for extended periods
- Engineering
- Mid-level
Quick Apply
6d
Wiring Assemblers
Adecco —Canton, MA
- $20 - $23 an hour
- Full-time
- Fair chance
- In-person
- Entry level
- Commuter assistance
- Disability insurance
Quick Apply
Microscope Assembler
Adecco —Tyngsboro, MA
- $19 - $21 an hour
- Contract
- Mid-level
- Military encouraged
- Fair chance
- Commuter assistance
- Paid holidays
Quick Apply
4d
Area Coach - Ohio
Adecco —Parma, OH
- $70,000 - $75,000 a year
- Full-time
- Ability to walk for extended periods
- Travel
- Military encouraged
Quick Apply
Production Technician
Adecco —Boxborough, MA
- $20 - $25 an hour
- Contract
- Military encouraged
- Fair chance
- Entry level
- Commuter assistance
- Paid holidays
Quick Apply
4d
Welder (1st, 2nd & 3rd Shift) - East Granby, CT
Adecco —East Granby, CT
- $52,000 - $72,800 a year
- Email
- Mid-level
- 3 years
- Military encouraged
- Health insurance
- Dental insurance
Quick Apply
5d
Machine Operator
Adecco —Foothill Ranch, CA
- $18.97 - $20.97 an hour
- Overtime
- Military encouraged
- Fair chance
- Entry level
- Commuter assistance
- Paid holidays
Quick Apply
4d
Cleaner
Adecco —Walpole, MA
- $20 an hour
- Contract
- Background check
- Pass drug screening
- Military encouraged
- Commuter assistance
- Paid holidays
Quick Apply
4d
Senior Operational Buyer
Adecco —Devens, MA
- $85,000 - $110,000 a year
- Contract
- 8 years
- Analysis skills
- Military encouraged
- Commuter assistance
- Paid parental leave
Quick Apply
4d
General Manager - Blaine
Adecco —Blaine, MN
- $55,000 - $60,000 a year
- Military encouraged
- Fair chance
- Senior level
Quick Apply
9d

I want to receive the latest job alert for adecco

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

CNC Programmer - Manufacturing

Adecco -
Schofield, WI

Quick Apply

Job Details

Full-time
$70,000 - $85,000 a year
10 days ago

Benefits

Health insurance
Dental insurance
401(k)
Paid time off
Life insurance

Qualifications

Mid-level
3 years
Trade school

Full Job Description

CNC Programmer - Manufacturing:
CNC Programmer experience in an industrial manufacturing environment - is required!
Minimum of 4-5 years' in a CNC Programmer position - is required!

Trade school training along with real-world experience is optimal.

Location: Schofield, WI
Job Type: Full-Time
Remote: No, on-site
Salary: Commensurate with experience: $70K to $85K, plus benefits
Benefits: Medical, Dental, Life Insurance, 401K and PTO
Relocation: Not available
Skills we are seeking: Mastercam, Autodesk Fusion, Siemens NX, Esprit, Multi-axis programming (3-axis/4-axis/5-axis), Mill and Lathe experience, complete setup experience
Required: This position involves access to technology controlled under U.S. export control laws (ITAR). To comply with these laws, the applicant must be a 'U.S. Person' as defined by the government (a U.S. citizen, lawful permanent resident/Green Card holder, refugee, or asylee). Do you meet this requirement?

Position Summary:
The CNC Programmer creates and optimizes CNC programs for milling and turning operations. This role supports tooling, fixturing, program prove-out, and operator coordination to ensure safe, efficient, and repeatable machining.

Qualifications:

3–5 years of experience in CNC programming within a machining or industrial manufacturing environment.
Hands-on experience creating and optimizing CNC programs for both milling and turning operations.
Experience with multi-axis and/or multi-tool CNC machines preferred.
Strong understanding of cutting tools, feeds, speeds, work holding, and fixturing methods.
Ability to read and interpret engineering drawings, GD&T, and machining requirements.
Location – Wausau/Schofield, Wisconsin area.
Position requires U.S. Citizenship or U.S. Permanent Residency (Green Card) due to ITAR compliance. - This position involves access to technology controlled under U.S. export control laws (ITAR). To comply with these laws, the applicant must be a 'U.S. Person' as defined by the government (a U.S. citizen, lawful permanent resident/Green Card holder, refugee, or asylee). Do you meet this requirement?

Skills Required:

CNC programming for milling, turning, and multi-tool machining centers.
Strong knowledge of machining processes, cutting parameters, tool selection, and cycle time optimization.
Experience with work holding, fixturing concepts, and setup improvement.
Ability to troubleshoot and revise CNC programs during prove-out and production support.
Knowledge of machine tooling, inserts, offsets, and tool life management.
Ability to read blueprints, GD&T, and process specifications accurately.
Familiarity with CAM software (prefer for Auto desk Future CAM), CNC controls, and program verification methods.
Strong coordination with machine operators, manufacturing engineers, and quality teams.
Continuous improvement mindset focused on safety, quality, delivery, and productivity.
Proficiency in Microsoft Office and manufacturing documentation practices.

Key Responsibilities:

Create, modify, and maintain CNC programs for milling and turning operations based on engineering drawings and production requirements.
Develop programs for machines that handle multiple tools and complex machining sequences within the same setup.
Select the correct cutting tools, inserts, holders, feeds, and speeds to achieve required quality and cycle time targets.
Define and improve work holding and fixturing concepts to support safe, repeatable, and efficient machining.
Coordinate closely with CNC operators and setup personnel during program prove-out, first-piece validation, and production startup.
Troubleshoot machining issues and revise programs to improve dimensional accuracy, tool life, and machine utilization.
Support new part introduction by developing machining programs, setup methods, and process documentation.
Review part prints, tolerances, and GD&T requirements to ensure manufacturability and process capability.
Maintain program revision control and document programming changes, setup requirements, and tooling information.
Work with Manufacturing Engineering, Quality, and Production teams to support continuous improvement and standardization.
Assist in reducing cycle time, improving process stability, and supporting cost reduction initiatives.

BENEFITS:

Full time employees regularly scheduled to work 30 hours or more per week are eligible for benefits. Benefits are available the first of the month following 30 days of employment.

EEO
Equal Opportunity Employer – Race/Color/Sex/Religion/National Origin/Sexual Orientation/Gender Identity/Vets/Disabilities

Pay Details: $70,000.00 to $85,000.00 per year

Equal Opportunity Employer/Veterans/Disabled

Military connected talent encouraged to apply

To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.adecco.com/en-us/candidate-privacy

The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:

The California Fair Chance Act
Los Angeles City Fair Chance Ordinance
Los Angeles County Fair Chance Ordinance for Employers
San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Quick Apply

Refine Your Search

adecco jobs

CNC Programmer - Manufacturing

Radiologist

Manufacturing

MRI Technologist

Radiologic Technologist

Tailor

Buyer

Forklift Operator

Controller - Manufacturing

Manufacturing Quality Auditor (Entry Level)

Test Technician - 3rd Shift

Wiring Assemblers

Microscope Assembler

Area Coach - Ohio

Production Technician

Welder (1st, 2nd & 3rd Shift) - East Granby, CT

Machine Operator

Cleaner

Senior Operational Buyer

General Manager - Blaine

I want to receive the latest job alert for adecco

Related Searches

Explore jobs in more locations

Job Seeker Tools

Employer Tools

Browse

Stay Connected