Top 552097 Computer Operator Jobs

CNC Operator
LMT Defense —Eldridge, IA
- $17 - $28 an hour
- Full-time
- Background check
- 5 years
- Computer literacy
- Health savings account
- Health insurance
Quick Apply
14d
FST Senior - Rotator- Midland- NG Mechanic
Archrock —Midland, TX
- Full-time
- Clean driving record
- Microsoft Outlook
- Ability to walk for extended periods
Journeyman Electrician
Joe Jurgielewicz & Son, LTD. —Reading, PA
- Full-time
- Microsoft Outlook
- Ability to walk for extended periods
- 5 years
Quick Apply
Track Foreman
Grace Railroad Contractors, Inc. —Pine Bluff, AR
- $46,800 - $52,000 a year
- Full-time
- Background check
- Construction site
- Heavy equipment operation
- Health insurance
- Dental insurance
Quick Apply
Logistics Utility
Smart Sand Inc —Taylor, WI
- $24 an hour
- Overtime
- High school diploma or GED
- Computer skills
- Entry level
Quick Apply
Mechanical Technician
Martin Energy Group Services LLC —Tipton, MO
- Background check
- Writing skills
- Basic math
Quick Apply
Electrical Specialist
Linde Gas US —Taylor, TX
- Full-time
- Background check
- Up to 50% travel
- 5 years
- Health savings account
- Paid holidays
Quick Apply
Transportation Construction Inspector Supervisor (TCIS)
URBAN ENGINEERS INC —Erie, PA
- $31.05 - $35.50 an hour
- Weekends as needed
- Construction site
- Computer literacy
- Bachelor of Science
- Mileage reimbursement
- Disability insurance
Quick Apply
CNC Operator
Bayer Built Woodworks —Belgrade, MN
- $29 - $32 an hour
- Computer literacy
- High school diploma or GED
- Computer skills
Quick Apply
10141: Technician
FedEx Freight —Sparks, NV
- $31.54 - $34.76 an hour
- Monday to Friday
- Writing skills
- CDL A
- Mid-level
- Paid parental leave
- Paid holidays
Marine Service Technician
Bob Feil Boats & Motors —East Wenatchee, WA
- $30 - $50 an hour
- Email
- Background check
- Pass drug screening
- Mid-level
- Paid holidays
- Health insurance
Quick Apply
8d
Electrical Specialist
Linde Gas US —Beaumont, TX
- Full-time
- Background check
- Up to 50% travel
- 5 years
- Health savings account
- Paid holidays
Quick Apply
1st Shift Manufacturing Maintenance Tech @ Brunswick, Lund, Crestliner
Brunswick Corporation —New York Mills, MN
- $20.10 - $24.00 an hour
- Overtime
- In person
- Carpentry
- Background check
- Up to 50% travel
- Wellness program
- Health savings account
Quick Apply
I&E Technician
Linde Gas US —McIntosh, AL
- Full-time
- Background check
- 5 years
- Mid-level
- Health savings account
- Paid holidays
Quick Apply
12d
10141: Technician
FedEx Freight —Northwood, OH
- $30.70 an hour
- Writing skills
- CDL A
- Mid-level
Lead Motive Service Tech
Alpine Power Systems —Indianapolis, IN
- Computer literacy
- Mid-level
- Travel
- Health insurance
- 401(k)
Quick Apply
QC Inspector
Thoma-Sea Marine Constructors, LLC —Houma, LA
- $18 - $23 an hour
- Full-time
- High school
- 5 years
- Computer literacy
- Health insurance
- Dental insurance
Quick Apply
I&E Technician
Linde —Claremore, OK
- Full-time
- Background check
- Computer literacy
- Mid-level
- Health savings account
- Paid holidays
Quick Apply
Industrial Fleet Maintenance Mechanic
Bethlehem Construction —Cashmere, WA
- $24 - $28 an hour
- Full-time
- Background check
- Clean driving record
- Computer literacy
- Profit sharing
- Health savings account
Quick Apply
Crusher Operator
Gagne & Son Concrete —Belgrade, ME
- $46,645 - $55,735 a year
- Full-time
- Computer literacy
- Pass drug screening
- Mid-level
- Paid parental leave
- AD&D insurance
Quick Apply

I want to receive the latest job alert for Computer Operator

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

Explore jobs in more locations

Computer Operator jobs near

CNC Operator

LMT Defense -
Eldridge, IA

Quick Apply

Job Details

Full-time
$17 - $28 an hour
14 days ago

Benefits

Health savings account
Health insurance
Dental insurance
Flexible spending account
Paid time off
Employee assistance program
Vision insurance
401(k) matching
Flexible schedule

Qualifications

Mechanical blueprint interpretation
Computer operation
Machine setup
Equipment setup (production tasks)
Blueprint specification interpretation
Computer literacy
Machining fixtures
Industrial equipment adjustment
Machining tool setup
Calipers
Dimensional measurements
CNC quality inspection
Attention to detail
Holding fixtures proficiency
Precision measurement in machining
Mechanical quality control procedures
Micrometer
Blueprint reading
CNC G-code Programming
Computer skills
Milling machines
Hand tools
CNC
Equipment adjustment (production tasks)

Full Job Description

LMT Defense provides top tier products to the US Military, law enforcement and government agencies, in addition to international customers across the globe. Products include precision engineered modular rifle systems, grenade launchers, suppressors, and components. As it was in the very beginning, LMT’s mission is to exceed customers’ expectations of quality and value, and we have been doing so for over 40 years. LMT Defense needs your help as we continue to grow into the future. If you are looking for a position that is fast paced, with competitive benefits (PTO after 90 days of employment, health savings account, employer 401(k) match), flexible work schedules, and climate-controlled facility; LMT Defense is the perfect company for you. We are excited to announce that all 2nd and 3rd shift employees will receive either $1.50/hr. or $3.00/hr. shift differential! We are looking to fill multiple CNC Operator Level I, II & III positions on 1st, 2nd, and 3rd shift. Below are the preferred skills, duties, and responsibilities you will have performing as our CNC Operator Level I, II & III.

POSITION SUMMARY:

The function of the CNC Operator Levels I-III is to perform advanced setup operations, adjust and check out programming, and operate CNC Mill and Lathe tools to perform a complex series of progressive machining operations on a diversified line of work to close and exacting tolerances and finish specifications requiring a high degree of skill.

MINIMUM REQUIREMENTS:

Availability to work (7am-3:15pm) 1st shift, (3pm-11:15pm) 2nd shift, and (11pm-7:15am) 3rd shift.
Training occurs on 1st shift for up to 90 days if you are on an off shift.
Required: High School/GED diploma or vocational school equivalent.
Required: 5+ years of machining experience with formal training or certification from an accredited trade school.
Required: Computer literacy specific to operating CNC machines.
Required: Experience with machining techniques and methods of CNC Mill and Lathes as well as tool operating procedures and blueprint reading.
Required: A broad knowledge of machining techniques and familiarity with Mazak, Mori Seiki, Brother, Okuma, Tsugami, G-codes, M-codes, lathes, and mills.
Basic hand tool knowledge.
Must have the ability to accurately use measuring equipment such as micrometers, calipers, gauges, and height stands.
Must be able to work from programming instructions and operations data and machine setup instructions defining and coding tool arrangements.
Familiar with machine calibrations and console settings to perform operations.
Setups involve familiarity with and understanding of program formats involving combinations of operations such as profiling, drilling, boring, contour milling, turning, facing, threading, and recessing to the capacity of the machine and control factor.
Must have experience with tolerances (+/-.003) and ability to make exact tolerances.
Ability to check parts for conformance to specifications.
Must be able to understand and properly use fixtures and tooling.
Possess strong attention to detail and communication skills, both written and verbal.
Must follow written instructions and read blueprint specifications set forth by LMT.

JOB RESPONSIBILITIES AND DUTIES:

This list of duties and responsibilities is not all inclusive and may be expanded to include other duties and responsibilities as management may deem necessary from time to time.
Operate CNC Machine centers to produce machined parts.
Operate more than one unit simultaneously.
Perform all operations to set-up equipment and fixtures in the machining center for other operators working from drawings and specification sheet.
Diagnose problems and make adjustments.
Responsible for the proper selection of tooling, set-up and adjustment, and for manually programming short runs/special jobs.
Maintain quality and safety standards. Perform self-inspection of parts to ensure specs.
Adhere to quality assurance standards.
Keep accurate records by documenting and communicating actions, irregularities, and continuing needs. Document actions by completing production and quality logs.
Sustain repairs and maintenance of the machines as well as other equipment and call for repairs and supplies.
Follow manufacturer’s instructions, troubleshoot malfunctions, and update job knowledge by voluntarily participating in educational opportunities.
Keep workstation and equipment clean.
Instruct operators on procedures and methods and make periodic operation checks to assure proper machining operations.

BENEFITS:

PTO after 90 days of employment
Bonus Time Off for good attendance
Medical, Dental, and Vision
Health Savings Account (HRA)
Flex Savings Account (FSA)
Employee Assistance Program (EAP)
401(k) Account + employer matching
And so much more!

*LMT Defense is an Equal Opportunity and Affirmative Action Employer.

LMT Defense is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job related reasons regardless of race, ethnicity, color, religion, sex, sexual orientation, age, national origin, disability, gender identity, genetic information, veteran status, or any other status protected by law. However, U.S. Citizenship, Permanent Residency or other appropriate status is required for certain positions, in accord with U.S. import & export regulations.

*Drug-Free Workplace

In accordance with policies and applicable state laws, LMT Defense provides for a drug-free workplace. Therefore, all applicants seeking employment with LMT will be subject to drug testing as a condition of employment.

Job Type: Full-time

Pay: $17.00 - $28.00 per hour

Work Location: In person

Quick Apply

Refine Your Search

Computer Operator jobs

CNC Operator

FST Senior - Rotator- Midland- NG Mechanic

Journeyman Electrician

Track Foreman

Logistics Utility

Mechanical Technician

Electrical Specialist

Transportation Construction Inspector Supervisor (TCIS)

CNC Operator

10141: Technician

Marine Service Technician

Electrical Specialist

1st Shift Manufacturing Maintenance Tech @ Brunswick, Lund, Crestliner

I&E Technician

10141: Technician

Lead Motive Service Tech

QC Inspector

I&E Technician

Industrial Fleet Maintenance Mechanic

Crusher Operator

I want to receive the latest job alert for Computer Operator

Related Searches

Explore jobs in more locations

Job Seeker Tools

Employer Tools

Browse

Stay Connected