POSITION: Inspector
LOCATION: Jupiter, FL.
STATUS: Hourly non-exempt
JOB SUMMARY
ESSENTIAL DUTIES AND RESPONSIBILITIES
-
The essential functions of the job include, but are not limited to, the following:
-
Performs assessment on various gas turbine components received for inspection by following written procedures, documents (blueprints, drawings, and specifications), and established practices
-
Performs visual inspections as required
-
Performs First Article Inspection Report inspections and maintains documentation
-
Interfaces with engineering and order execution regarding recommendations for work instruction and router improvements
-
Generates NCRs in QSI system
-
Reviews job paperwork through entire inspection process to ensure completeness and conformity
-
Utilizes precision measuring equipment as required for incoming assessment
-
Operates small cranes to move equipment, parts, and material
-
Maintains a clean and orderly work area
-
Following Environmental Health and Safety regulations while working in fast-paced environment.
-
Performing waste handling in accordance to EHS procedures & legal requirements, such as:
-
Segregating waste generated
-
Placing hazardous and non-hazardous waste in appropriate containers
-
Maintaining waste containers closed and in good condition
-
Labeling waste containers with appropriate hazardous waste and non-hazardous waste labels
-
Marking the start accumulation date to hazardous waste label once the container in the satellite accumulation area becomes full.
-
Arranging internal waste transfer to central accumulation area
-
Contain and clean up area incidental spills
-
Other duties as assigned
MINIMUM REQUIREMENTS
Education & Training
-
High School Diploma or GED equivalent
-
Complete Specific on-the-job training towards meeting essential duties and work area performance criteria.
-
Must complete EHS assigned regulatory training for work area as described by PSM’s EHS Training Matrix, which includes:
-
Initial and annual Hazardous Waste Management training.
Skills/Experience
-
2+ years of experience in a production or manufacturing environment
-
Experience with interpretation of technical drawings or work instructions
-
Basic knowledge of MS Office programs, SAP, and time keeping applications
-
Must be detail orientated
Physical Requirements
-
Stooping/Crouching. Bending body downward and forward by bending spine at the waist.
-
Kneeling. Bending legs at knee to come to a rest on knee or knees.
-
Crawling. Moving about on hands and knees or hands and feet.
-
Reaching. Extending hand(s) and arm(s) in any direction.
-
Standing. Particularly for sustained periods of time
-
Walking. Moving about on foot to accomplish tasks, particularly for long distances or moving from one work area to another.
-
Pushing & Pulling
-
Lifting up to 50 lbs. Raising objects from a lower to a higher position or moving objects horizontally from position-to-position.
-
Grasping. Applying pressure to an object with the fingers and palm.
-
Repetitive motion. Substantial movements (motions) of the wrists, hands, and/or fingers.
-
The worker is required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes.
-
The worker is subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level.
-
The worker is subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, exposure to high heat or exposure to chemicals.
-
May require travel (air & ground) with short notice.
-
Being able to wear required PPEs for specific tasks performed, such as respirators, Tyvek suit, gloves, face shield, etc.
-
Ability to cooperate and work with people
Equal Opportunity Employer Veterans/Disabled
