As a Combo Pipe Welder you will be responsible for using a combination of two of the SMAW, GMAW, GTAW, and FCAW processes to weld various components in flat, vertical, or overhead positions.
Responsibilities (other duties may be assigned)
-
Must be able to observe and recognize problems during the welding process and adjust speed, voltage, amperage, or feed of the rod accordingly.
-
Must be able to read and interpret prints and plans.
-
Minimum of 4-5 years’ experience required.
-
Perform code (ASME, AWS or API) compliant welds using GMAW, SMAW, GTAW & FCAW processes.
-
Properly use fabrication shop hand tools. (grinders, drills, air tools, etc.).
-
Operate forklifts & overhead cranes.
-
Operate vertical/horizontal band saws.
-
Rig, hoist/lift & move materials.
-
Maintain safe and clean work environment.
-
Required to adhere to all safety rules and regulations.
Requirements:
-
Must be able to weld qualification test coupon for;
- FCAW and/or GMAW welding process in the 3G & 4G position using Carbon Steel plate.
-
SMAW and GTAW welding processes in the 6G position with Carbon and/or Stainless Steel pipe.
-
Positive “can do” attitude & strong work ethic.
-
Ability to take detailed instruction.
-
Willing to be challenged to improve welding skills to meet high quality standards.
-
Must be able to read & understand weld symbols, weld procedures, mechanical and structural drawings.
-
Knowledge of OSHA guidelines and safe work practices.
-
Must be able to use Oxy/fuel & Plasma hand cutting torch.
-
Daily housekeeping of shop and/or work area.
-
Flexible working schedule to support project needs.
Considered a Plus:
-
ASME pipe welding experience.
-
Fit-up & layout experience on structural/misc. steel and pipe spools.
-
Experience with machine equipment such as mill or drill press.
-
Familiarity with weld inspections and related NDE (RT, MT, PT)
-
Pipe welding experience with ASME B31.3, B31.4 and API 1104 codes.
-
Fit-up, layout & welding experience on structural/misc. steel.
-
Familiarity with weld inspections, inspection documentation and NDE (RT, UT, MT, PT).
-
Formal/technical education.
Required Tools:
-
Steel-Toed Boots
-
Tool Box (lockable)
-
Welding Hood (Auto Darkening or Lift Front Lens – Hard Hat Type)
-
Leathers
-
Crescent Wrenches
-
Hammer (2 lb. & 4 lb.)
-
25’ Tape Measure
-
10” Vise Grips
-
Wire Brush
-
Wrap-Around
-
½” Drive Socket Set 3/8” to 1 ¼”
- Chain Vise Grips with Chain Extension
-
Chipping Hammer
-
Tip Cleaner
-
Tri-Square
-
Pipe Wrenches
-
100’ Tape Measure
-
Striker
-
Torpedo Level
-
Hi-Lo Gauge
-
Spacing Blade
-
Mini Mag Light/Flashlight
-
24 oz. Plumb Bob
-
Center Punch
-
High leverage side cutters
-
Pipe Wedges
