Top 67 Associate manager, tooling and process Jobs in Auburn University Al

Class One Op
Nashville Wire Products —Auburn, AL
- Heavy lifting
- Basic math
- No experience needed
Quick Apply
Encapsulation Operator (DAYS)
Pharmavite LLC —Opelika, AL
- $39,000 - $63,000 a year
- Overtime
- Ability to walk for extended periods
- English
- High school diploma or GED
- Health insurance
- Dental insurance
PRACTICE MANAGER - UROLOGY ASSOCIATES
East Alabama Medical Center —Opelika, AL
- Full-time
- Mid-level
- Supervising experience
- Associate's degree
Meter Cell Operator - 2nd Shift
Neptune Technology Group Inc. —Tallassee, AL
- Overtime
- High school
- High school diploma or GED
- Assembly
- Employee stock purchase plan
- Paid holidays
Plastics Technician Department 40 - 3rd Shift
Neptune Technology Group Inc. —Tallassee, AL
- High school
- High school diploma or GED
- Entry level
- Employee stock purchase plan
- Paid holidays
Associate Manager, Tooling and Process Engineering
AptarGroup, Inc. —Auburn, AL
- 5 years
- Engineering
- Travel
Set-Up Mechanic
Pharmavite LLC —Opelika, AL
- $40,000 - $66,000 a year
- Overtime
- Mechanic experience
- English
- Mid-level
- Health insurance
- Dental insurance
Sequencing Operator - 1st Shift (6:30AM-3:00PM)
DAEDONG HI-LEX OF AMERICA —Cusseta, AL
- Full-time
- Sanitation
- Continuous improvement
- Computer skills
Manufacturing Engineer
Neptune Technology Group Inc. —Tallassee, AL
- Bachelor of Science
- Engineering
- Entry level
Manufacturing Engineer Manager
Faith Technologies Inc. —Opelika, AL
- Full-time
- Bachelor's degree
- Travel
- Senior level
Shop Floor Scheduler
GKN Aerospace —Tallassee, AL
- Mid-level
- 3 years
- High school diploma or GED
Manufacturing Engineer
GKN Aerospace —Tallassee, AL
- Engineering
- Residential
- Assembly
- Relocation assistance
Production Engineering Manager
HL Mando America Corp —Opelika, AL
- Weekends as needed
- 18 years or older
- 7 years
- Bachelor of Science
- Health insurance
- Dental insurance
Technician - Manufacturing Engineering - Tooling
GKN Aerospace —Tallassee, AL
- Mid-level
- Cleaning
- Hand tools
Kitchen Operator (NIGHTS)
Pharmavite LLC —Opelika, AL
- $39,000 - $63,000 a year
- Overtime
- Inventory management
- Ability to walk for extended periods
- English
- Health insurance
- Dental insurance
Bilingual Engineer
ILJIN America Corporation —Auburn, AL
- $66,751.46 - $80,388.86 a year
- Full-time
- Mid-level
- Analysis skills
- In-person
- Health insurance
- Dental insurance
Quick Apply
14d
Configuration Management, Manager
GKN Aerospace —Tallassee, AL
- 5 years
- Analysis skills
- Product management
Sequencing Operator - 2nd Shift (2:30PM-10:30PM)
DAEDONG HI-LEX OF AMERICA —Cusseta, AL
- Full-time
- Sanitation
- Continuous improvement
- Computer skills
Sequencing Operator - 3rd Shift (10:30PM-7:00AM)
DAEDONG HI-LEX OF AMERICA —Cusseta, AL
- Full-time
- Sanitation
- Continuous improvement
- Computer skills
Network and Security Operations Manager
Neptune Technology Group Group Inc. —Tallassee, AL
- Hybrid work
- Computer science
- Computer Science
- 5 years

I want to receive the latest job alert for associate manager, tooling and process in auburn university al

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

Explore jobs in more locations

associate manager, tooling and process jobs near auburn university al

Production Engineer jobs in Opelika, AL

Engineer jobs in Auburn, AL

Manufacturing Engineer jobs in Tallassee, AL

Practice Manager jobs in Opelika, AL

Mechanic jobs in Opelika, AL

Surgery Scheduler jobs in Houston, TX

Patient Care Technician jobs in Goose Creek, SC

Plastic Surgery Technician jobs in Wayne, NJ

Plastic Surgery Technician jobs in Boston, MA

Pharmacy Technician jobs in Fort Worth, TX

Plastic Surgery Technician jobs in Houston, TX

Plastic Surgery Technician jobs in Lakeway, TX

Lab Technician jobs in Tucson, AZ

Production Engineer jobs in King George, VA

Sports Production jobs in New York, NY

Media Production Internship jobs in Florida

Film Production Safety jobs in Los Angeles, CA

Production Engineer jobs in Denver, CO

Production Engineer jobs in Boise, ID

Production Engineer jobs in Los Angeles, CA

Class One Op

Nashville Wire Products -
Auburn, AL

Quick Apply

Job Details

Qualifications

Basic math

Full Job Description

Operates production machinery and equipment in production department. May assemble and/or pack products. Works under close supervision. This is an entry-level position.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following.

Operate basic productivity equipment.
Move materials and/or parts between workstations.
Assist other operators by loading or unloading jigs, fixtures, and/or tooling.
Assemble and/or pack products.
Load and unload machines, conveyors, pallets or automatic lines.
Must keep accurate counts of production parts.
Produce to established standards and conduct simple quality inspections.
Keep work areas clean and orderly. Responsible for conducting all work in a safe manner following established safety procedures.
Read specified measuring instruments including but not limited to tape measure, micrometer, etc.
May be required to input basic data into production machinery.
Receives team and continuous process improvement training and participates on project teams as required.
May perform necessary rework and minor repairs.
Performs minor set-up adjustments and preventative maintenance as required.
Perform other duties as assigned.
May participate on project teams as requested.

ORGANIZATION RELATIONSHIP:

Manager Division

Plant Manager

Production Supervisor

EC1000

QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION/EXPERIENCE REQUIRED: No prior experience or training.

SKILLS AND KNOWLEDGE REQUIRED:

Language Skills: Ability to understand the meaning of written or printed matter. Ability to write information by inscribing characters or symbols. Ability to speak simple sentences and communicates to co-workers and supervisors.
Math Skills: The ability to add, subtract, multiply or divide. Determine the number of individual things in a unit or group.

PHYSICAL DEMANDS:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee frequently is required to stand; walk. Occasionally required sitting; climbing or balancing; stooping, kneeling, crouching, or crawling.
Lifting Frequency: Medium heavy lifting 80 lbs. maximum with frequent lifting and/or carrying objects up to 40 lbs. 67 - 100% of the time.
Vision: Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.
Repetitive Hand Action: Firm grasping - the ability to exert sufficient grip to pick-up a case of 12 oz. soft drinks or to pick-up a bowling ball. Requires approximate grip strength of 45-60 lbs. on a hand dynamometer.
Fine Manipulation of Hands/Fingers: Sufficient coordination to place and screw a small washer on a bolt, to pick-up clip from a desk top, or pick up a dime off a counter top. Use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms.

WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee frequently works near and/or with moving mechanical parts, fumes or airborne particles, toxic or caustic chemicals, and vibration.
The noise level in the work environment is usually loud.
While performing the duties of this job, the employee is required to stand on concrete floors for an extended period of time.

While performing the duties of this job, the employee may be subject to extreme temperatures as plant production areas are not air conditioned.

Equal Opportunity Employer
This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (https://www.eeoc.gov/poster) notice from the Department of Labor.

Quick Apply

Refine Your Search

associate manager, tooling and process jobs in auburn university al

Class One Op

Encapsulation Operator (DAYS)

PRACTICE MANAGER - UROLOGY ASSOCIATES

Meter Cell Operator - 2nd Shift

Plastics Technician Department 40 - 3rd Shift

Associate Manager, Tooling and Process Engineering

Set-Up Mechanic

Sequencing Operator - 1st Shift (6:30AM-3:00PM)

Manufacturing Engineer

Manufacturing Engineer Manager

Shop Floor Scheduler

Manufacturing Engineer

Production Engineering Manager

Technician - Manufacturing Engineering - Tooling

Kitchen Operator (NIGHTS)

Bilingual Engineer

Configuration Management, Manager

Sequencing Operator - 2nd Shift (2:30PM-10:30PM)

Sequencing Operator - 3rd Shift (10:30PM-7:00AM)

Network and Security Operations Manager

I want to receive the latest job alert for associate manager, tooling and process in auburn university al

Explore jobs in more locations

Job Seeker Tools

Employer Tools

Browse

Stay Connected