Composite Tool Maker
General Atomics —Adelanto, CA
- $60,670 - $90,198 a year
- Extended hours
- 5 years
- Mid-level
- Forklift
- Relocation assistance
7d
3D Printing Lead
Layup Parts —Huntington Beach, CA
- $90,000 - $120,000 a year
- Full-time
- CAD
- Mid-level
- Ability to lift 50 pounds
- Disability insurance
- Health insurance
Quick Apply
Builder Maker
THIRTEENTH FLOOR ENTERTAINMENT GROUP —La Verne, CA
- $20 - $35 an hour
- Temporary
- 18 years or older
- 11+ years
- Mid-level
Quick Apply
Slugworks Assistant Lab Manager
University of California Santa Cruz —Santa Cruz, CA
- $92,550 - $108,100 a year
- Weekends as needed
- CPR Certification
- Engineering
- Mid-level
Mechanical Prototyping Technician
Ocean Power Technologies Inc —Richmond, CA
- $36 - $40 an hour
- Overtime
- CAD
- Mid-level
- Forklift
- Disability insurance
- Health insurance
Quick Apply
Arch Spec CAD Designer Job
Armstrong —Carson, CA
- $70,304 - $85,760 a year
- Full-time
- Ability to walk for extended periods
- Mid-level
- Office
- Paid time off
- 401(k) matching
Mechanical Integration Technician
Gatik AI —Santa Clara, CA
- $80,000 - $120,000 a year
- Full-time
- Mid-level
- Office
- Welding
Quick Apply
Spring/Summer Engineering Co-op
Haast Autonomous —San Francisco, CA
- Full-time
- Computer Science
- Assembly
- Electrical Engineering
Quick Apply
Aerospace Vehicle Technician Senior 2nd Shift - Millennium Space Systems
Boeing —El Segundo, CA
- $29.42 - $47.09 an hour
- Microsoft Word
- Microsoft Excel
- High school diploma or GED
- Health savings account
- Disability insurance
Aerospace Vehicle Technician Senior 1st Shift - Millennium Space Systems
Boeing —El Segundo, CA
- $29.42 - $47.09 an hour
- High school diploma or GED
- Power tools
- 1 year
- Health savings account
- Disability insurance
PATTTERN SHOP TECHNICIAN (Selma, CA)
Fresno Valves & Castings, Inc. —Selma, CA
- $19 - $26 an hour
- Full-time
- 18 years or older
- High school diploma or GED
- Assembly
- Profit sharing
- Paid holidays
Quick Apply
Component Analysis and Space Structural Engineer
The Aerospace Corporation —El Segundo, CA
- $100,300 - $175,900 a year
- Full-time
- 5 years
- Analysis skills
- Travel
- Paid holidays
- Relocation assistance
Director of Business Development and Capture
Scaled Composites —Mojave, CA
- $193,000 - $289,600 a year
- Office
- Ability to climb stairs
- Master's degree
- Relocation assistance
- 401(k) matching
Quick Apply
Director, R&D Engineering
Sila —Alameda, CA
- $211,000 - $276,640 a year
- Management
- Bachelor of Science
- 11+ years
Quick Apply
Regional Sales Manager
THE GILL CORPORATION —El Monte, CA
- $148,404 - $178,799 a year
- Full-time
- Engineering
- English
- Office
Quick Apply

More jobs to discover

Find similar jobs that you might be interested in.

3D Printing Lead
Layup Parts —Huntington Beach, CA
This role is perfect for someone who enjoys operating cutting-edge equipment, solving technical challenges, and building reliable production processes in a fast…
$90,000 - $120,000 a year
Quick Apply
Lead Innovation Materials Designer
Patagonia —Ventura, CA
Apply a science‑based approach to develop novel and differentiated material solutions. Familiarity with Patagonia fabrication tools and processes, including…
$148,500 - $165,000 a year

I want to receive the latest job alert for composite tool maker in california

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

Composite Tool Maker

General Atomics -
Adelanto, CA

Apply Now

Job Details

Full-time
$60,670 - $90,198 a year
7 days ago

Benefits

Relocation assistance

Qualifications

Machine shop presses
Mechanical blueprint interpretation
Press operation
Drill presses
Sanding tools
Scissors
Power tools for woodworking
Dimensional measurements
Parts drawings
Precision measurement in machining
Forming machines

Full Job Description

General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

Our Adelanto facility is seeking a Composite Tool Maker. This position requires working in a loud manufacturing environment with a variety of epoxy agents, this position lays out, fabricates and assembles complex metalworking dies, molds, composite, and machine tool fixtures by analyzing blueprints, sketches, engineering designs/drawings, models, tool orders, manufacturing service requests, engineering or shop specifications, and verbal descriptions. Uses a variety of machinist's hand tools and precision measuring instruments; computes dimensions; determines machining and material or parts required. Performs complex precision work to exacting tolerances and dimensions; may recommend revisions in design and/or substitutions in material based on machinability or fabrication problems encountered; and solves problems relating to unusual materials, work-holding arrangements, machine settings, fabrication methods, and production process. May monitor and verify quality in accordance with statistical process or other control procedures and may provide direction and guidance to less experienced staff.

DUTIES AND RESPONSIBILITIES:

Fabricate and assemble composite parts and tools using epoxy resins, pre-preg material, graphite, fiberglass, structural adhesives, tooling foams, tooling boards (solid and honeycomb) and other various materials.
Assist in the development of prototype molds and jigs.
Fabricate composite and metal trim & drill fixtures per blueprints.
Fabricate and assemble composite and metal assembly fixtures for controlling location and configuration of composite structures.
Sets up and operates micrometers, height gages, calipers, jig transit and precision level to determine location of holes, trim, lines, center lines, alignment of master models and assembly fixtures.
Fabrication and set up contour templates, mix plaster, spine plaster over templates to fabricate plaster pattern. Assists with plaster spins and runs to create master molds.
Layout patterns on wood stock, divides patterns into sections according to the shape to facilitate the removal of the part from the pattern and verify the dimensions and contours.
Layout and measure of patterns on polystyrene and polyurethane foams.
Cut and shape pattern using planes, shaves, files, sure foams, scrapers, routers, hotwires, mills and lathes.
Apply sealers, releases, base coats and finish coats using various spray equipment.
Set up and operate of metal working machine tools such as saws, drills, lathes, planners, belt & disk sanders, grinders, drill press, hydraulic press, shear and brake, and welding equipment.
Fabricate machine parts to specifications of tooling requirements.
Perform product inspection and rework as required.
Responsible for observing all laws, regulations, and other applicable obligations wherever and whenever business is conducted on behalf of the Company.
Expected to work in a safe manner in accordance with established operating procedures and practices.
Additional Functions Other duties as assigned or required.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

Job Qualifications

Typically requires High school diploma and five or more years of progressive work experience. Additional work experience in an environment using composite pre-preg materials and epoxy resin systems may be substituted in lieu of education.
Must be able to read and interpret a variety of complex engineering design drawings; satisfactorily complete complex engineering calculations; have complete knowledge and use of measuring instruments such as scales, protractors and calipers; interpret very detailed descriptions and instructions for making appropriate tools; and have complete knowledge and experience using a variety of shop tools such as lathes, mills, planners, band saws, table saws, belt & disk sanders, grinders, drill press, hydraulic press, shear and brake, and hand tools such as rollers, paper cutters, scissors, x-acto knives, electric heat gun and fixtures such as mold and mandrels.
May require respirator certification. Must be able to work in a loud environment, work extended hours as required, and be able to lift tools and assemblies weighing up to 60 lbs.
Knowledge of composite pre-preg materials and epoxy resin systems is desired.
Ability to obtain and maintain DoD Security clearance is required.
Forklift experience preferred.

Job Category

Engineering

Experience Level

Mid-Level (3-7 years)

Workstyle

Onsite

Full-Time/Part-Time

Full-Time Hourly

Pay Range Low

60,670

Pay Range High

90,198

Travel Percentage Required

0% - 25%

Relocation Assistance Provided?

US Citizenship Required?

Yes

Clearance Required?

Desired

Clearance Level

Secret

Search Jobs at | General Atomics and Affiliated Companies

Apply Now

Refine Your Search

composite tool maker jobs in california

Composite Tool Maker

3D Printing Lead

Builder Maker

Slugworks Assistant Lab Manager

Mechanical Prototyping Technician

Arch Spec CAD Designer Job

Mechanical Integration Technician

Spring/Summer Engineering Co-op

Aerospace Vehicle Technician Senior 2nd Shift - Millennium Space Systems

Aerospace Vehicle Technician Senior 1st Shift - Millennium Space Systems

PATTTERN SHOP TECHNICIAN (Selma, CA)

Component Analysis and Space Structural Engineer

Director of Business Development and Capture

Director, R&D Engineering

Regional Sales Manager

More jobs to discover

I want to receive the latest job alert for composite tool maker in california

Explore jobs in more locations

Search Jobs at | General Atomics and Affiliated Companies

Job Seeker Tools

Employer Tools

Browse

Stay Connected