- Must be a U.S. citizen
- Tour of Duty: Flexible
- Security Requirements: Non-Critical Sensitive
- Appointment is subject to the completion of a favorable suitability or fitness determination, where reciprocity cannot be applied; unfavorably adjudicated background checks will be grounds for removal.
- Fair Labor Standards Act (FLSA): GS-12 =Exempt; GS-07/09/11=Non-Exempt
- Selective Service Requirement: Males born after 12-31-59 must be registered or exempt from Selective Service.
- Recruitment Incentives: None
- Bargaining Unit Status: Yes
- Pre-Employment Physical: Not Required
- Defense Acquisition Workforce position. Must complete DoD certification and other requirements. See Addtl Info.
- Financial Disclosure Requirement: Required
A. Basic Education Requirement
1. Bachelor's Degree or higher in Professional Engineering. To be acceptable, the curriculum must: (a) be in a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum or (b) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (1)statics, dynamics; (2)strength of materials (stress-strain relationships); (3)fluid mechanics, hydraulics; (4)thermodynamics; (5)electrical fields and circuits; (6)nature and properties of materials (relating particle and aggregate structure to properties); and (7)any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
2. Combination of education and experience: College-level education, training, and/or technical experience that furnished (a) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (b) a good understanding, both theoretical and practical,of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: Professional registration -Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. Written Test -Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. Specified academic courses -Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. Related curriculum -Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics,chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)
AND
B. Specialized Experience: One year of specialized experience that equipped you with the particular competencies to successfully perform the duties of the position, and that is in or related to the work of this position. To qualify at the GS-07 level, applicants must possess one year of specialized experience - must be equivalent to the GS-05 level or equivalent under other pay systems in the Federal service, military or private sector. To qualify at the GS-09 level, applicants must possess one year of specialized experience - must be equivalent to the GS-07 level or equivalent under other pay systems in the Federal service, military or private sector. To qualify at the GS-11 level, applicants must possess one year of specialized experience - must be equivalent to the GS-09 level or equivalent under other pay systems in the Federal service, military, or private sector. To qualify at the GS-12 level, applicants must possess one year of specialized experience must be equivalent to the GS-11 level or equivalent under other pay systems in the Federal service, military, or private sector. Applicants must meet eligibility requirements including minimum qualifications and any other regulatory requirements by the cut-off/closing date of the announcement. Applicants who meet the basic requirements described above are fully qualified for the specified entry grade described below with the applicable creditable specialized experience:
GS-07:
- Analyzing engineering problems and recommending detailed solutions.
- Analyzing and studying performance requirements for technical risks, functionality, and reliability.
GS-09:
- Assisting other engineers in the technical review of engineering projects.
- Demonstrating a good understanding of quality assurance principal concepts and methodologies.
GS-11:
- Recommending to contractors the selections, descriptions, and use of standard parts.
- Analyzing and studying performance requirements for technical risks, functionality and reliability.
GS-12:
- Testing and evaluating a variety of electronic devices such as satellites, communication systems, flight systems, navigation systems and/or weapon systems.
- Professional knowledge of electronic engineering concepts, principles and practices.
OR
C. Education Substitution: Such education must demonstrate the knowledge, skills, and abilities necessary to do the work. Education must be from a college or university accredited by an organization approved by the U.S. Department of Education. See http://ope.ed.gov/accreditation/Search.aspx. If using education to meet basic qualifications, YOU MUST SUBMIT A TRANSCRIPT as supplemental documentation. To qualify based on education in lieu of specialized experience, you must possess:
- GS-07: One year of graduate-level education or superior academic achievement. Such education must have provided the knowledge, skills, and abilities necessary to perform the work of the position being filled.
- GS-09: Two years of progressively higher level graduate education leading to a master's degree or master's or equivalent graduate degree. Such education must have provided the knowledge, skills, and abilities necessary to perform the work of the position being filled.
- GS-11: Three years of progressively higher level graduate education leading to a Ph.D. degree or Ph.D. or equivalent doctoral degree. Such education must have provided the knowledge, skills, and abilities necessary to perform the work of the position being filled.
- GS-12: Education cannot be substituted for specialized experience at this grade level.
OR
D. Combination: Combinations of successfully completed post-high school education and experience may be used to meet total qualification requirements for grade levels GS-07/ GS-09 and GS-11 and may be computed by first determining the applicants total qualifying experience as a percentage of the experience required for the grade level; then determining the applicant's education as a percentage of the education required for the grade level; and then adding the two percentages. The total percentages must equal at least 100 percent to qualify an applicant for that grade level. Only graduate education in excess of the amount required for the next lower grade level may be used to qualify applicants for positions at grade GS-07, GS-09 and GS-11.
OR
E. Additional Experience and Training Provisions for Graduates of Engineering Programs: a) Superior academic achievement at the baccalaureate level in an engineering program is qualifying for GS-7; b) A combination of superior academic achievement and 1 year of appropriate professional experience is qualifying at GS-9; c) Applicants with an engineering bachelor's degree who have appropriate experience as a technician equivalent to grade GS-7 or higher may have such experience credited for grade GS-9 only on a month-for-month basis up to a maximum of 12 months; d) Successful completion of a 5-year program of study of at least 160 semester hours leading to a bachelor's degree in engineering is qualifying at GS-7. Completion of such a program and 1 year of appropriate professional experience is qualifying at grade GS-9.
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
EDUCATION
GS-07, GS-09, GS-11: Are you using your education to qualify? You MUST provide transcripts or other documentation to support your educational claims. Unless otherwise stated: Unofficial transcripts are acceptable at time of application.
GS:12: Substitution of education may not be used in lieu of specialized experience for this grade level.
Education must be from an accredited college recognized by the Secretary, U.S. Department of Education. If using education completed outside the U.S., it must be submitted to a private organization that specializes in interpretation of foreign educational credentials and such education has been deemed at least equivalent to that gained in conventional U.S. education programs. YOU MUST SUBMIT TRANSCRIPTS. Failure to submit transcripts will result in a rating of ineligible.
GRADUATE EDUCATION: One academic year of graduate education is considered to be the number of credits hours that your graduate school has determined to represent one academic year of full-time study. Such study may have been performed on a full-time or part-time basis. If you cannot obtain your graduate school's definition of one year of graduate study, 18 semester hours (or 27 quarter hours) should be considered as satisfying the requirement for one year of full-time graduate study.
FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show that the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university.
Position requires DoD Acquisition Engineering & Tech Management (N) / ETM, Foundational certification within required timeframes. Selectee must also achieve 80 hours of Continuous Learning Points (CLPs) every 2-years. Click here for more details and Resources.
For Important General Applicant Information and Definitions go to: http://www.dla.mil/portals/104/documents/careers/GenAppInfoDef.pdf
Reemployed Annuitants: This position does not meet criteria for appointment of Reemployed Annuitants. The DoD criteria for hiring Reemployed Annuitants can be found at: http://www.esd.whs.mil/Portals/54/Documents/DD/issuances/140025/1400.25-V300.pdf
The Defense Logistics Agency (DLA) is committed to maintaining a safe, drug-free workplace. All DLA employees are required to refrain from illegal drug use on and off duty. DLA conducts pre-employment, reasonable suspicion, post-accident, and random drug testing.
Applicants tentatively selected for employment in testing designated positions will undergo a urinalysis to screen for illegal drug use prior to appointment. Refusal to undergo testing or testing positive for illegal drugs will result in withdrawal of the tentative job offer and a six-month denial of employment with DLA from the date of the drug test. Employees in drug testing designated positions are subject to random drug testing.
The DLA drug testing panel tests for the following substances: marijuana, cocaine, opiates, heroin, phencyclidine, amphetamines, methamphetamines, fentanyl, norfentanyl, methylenedioxymethamphetamine (MDMA), methylenedioxyamphetamine (MDA), and opioids.
ADVISORY: Use of cannabidiol (CBD) products may result in a positive drug test for marijuana. DLA employees are subject to Federal law and under Federal law, Marijuana is a Schedule I drug and is illegal.
Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
