Top 37 Avionics technician Jobs in Denver, Co

Instrumentation Technician
Instrumentation Technician —Centennial, CO
- $39 - $50 an hour
- Full-time
- Military
- Mid-level
- In-person
- Health savings account
- Relocation assistance
Quick Apply
Engineer II - Electrical - Test Systems
BAE Systems Inc. —Westminster, CO
- $79,365 - $134,921 a year
- Full-time
- Bachelor of Science
- Mid-level
- Office
- Health savings account
- Paid holidays
Avionics Aviation Maintenance Technician 145 Lead
Air Methods —Englewood, CO
- $37.82 - $47.28 an hour
- Full-time
- Microsoft Excel
- Microsoft Outlook
- Computer literacy
9d
Sr 145 Technician -- Avionics Tech
Air Methods —Englewood, CO
- $36.08 - $50.00 an hour
- Full-time
- Microsoft Excel
- Microsoft Outlook
- 5 years
- Relocation assistance
Aircraft Mechanic / A&P Technician, Piston Aircraft - APA Airport
ATP Flight School —Denver, CO
- $30 - $40 an hour
- Full-time
- Mid-level
- Ability to lift 25 pounds
- Under 1 year
- Paid holidays
- Disability insurance
Quick Apply
AVIONICS TECHNICIAN - FT
Cutter Aviation —Englewood, CO
- $30 - $45 an hour
- Full-time
- Background check
- Clean driving record
- Pass drug screening
- Vision insurance
Quick Apply
Avionics Technician (Multiple Levels)
Sierra Space —Broomfield, CO
- $22.74 - $40.52 an hour
- Full-time
- Continuous improvement
- Mentoring
- Cleaning
- Health insurance
- Dental insurance
Avionics Installation Technician
Pilatus Aircraft USA Ltd —Broomfield, CO
- $28 - $42 an hour
- Overtime
- Microsoft Outlook
- Mid-level
- Ability to climb stairs
- Health savings account
- Paid holidays
Electrical Aircraft Technician
GMRE —Aurora, CO
- $39.50 - $42.50 an hour
- Full-time
- Customer service
- Mid-level
- Ability to lift 50 pounds
- Paid holidays
- Dental insurance
Avionics Aircraft Technician
GMRE —Aurora, CO
- $39.50 - $42.50 an hour
- Full-time
- Customer service
- Mid-level
- Ability to lift 50 pounds
- Paid holidays
- Dental insurance
Avionics Technician III
Sierra Space —Englewood, CO
- $29.46 - $40.52 an hour
- Full-time
- 5 years
- Cleaning
- Senior level
- Health insurance
- Dental insurance
12d
Unmanned Aircraft Technician
Cellen H2, Inc. —Erie, CO
- $30 - $42 an hour
- Overtime
- Mid-level
- Travel
- In-person
- Health insurance
- Paid sick time
Quick Apply
9d
Aircraft Maintenance Technician
West Star Aviation —Englewood, CO
- $29 - $50 an hour
- Overtime
- Customer service
- Computer literacy
- English
- Health savings account
- Paid holidays
Technician Specialist
Lockheed Martin Corporation —Littleton, CO
- $51,800 - $91,310 a year
- Full-time
- Computer literacy
- Mid-level
- In-person
- Paid jury duty
- Paid holidays
Composite Technician (All Levels)
Sierra Space —Broomfield, CO
- $22.74 - $38.51 an hour
- Full-time
- Heavy lifting
- Military
- Ability to climb stairs
- Paid training
- Health savings account
Quick Apply
5d
Maintenance Technician - Colorado
Quarterhill —Brighton, CO
- $27 - $33 an hour
- Full-time
- Military
- Mid-level
- Windows
- Employee stock purchase plan
- Health insurance
10d
Manufacture Engineering Technician
Urban Sky —Denver, CO
- $30 - $34 an hour
- Full-time
- Engineering
- Mid-level
- Ability to lift 50 pounds
- Paid holidays
- Dental insurance
Quick Apply
Electrical Engineer III - 2D Harness Design
Sierra Space —Louisville, CO
- Full-time
- 3 years
- Master's degree
- Analysis skills
Aviation Maintenance Technician
The Blackhawk Group —Broomfield, CO
- $30 - $45 an hour
- Full-time
- Mid-level
- 3 years
- High school diploma or GED
- Paid holidays
- Disability insurance
Quick Apply
Sr Electrical Engineer - Harness Design 3D
Sierra Space —Centennial, CO
- $137,443 - $188,983 a year
- Full-time
- 6 years
- Master's degree
- Analysis skills
- Health insurance
- Dental insurance
12d

I want to receive the latest job alert for avionics technician in denver, co

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

Explore jobs in more locations

avionics technician jobs near denver, co

Avionics Technician jobs in Broomfield, CO

Aircraft Mechanic jobs in Denver, CO

Manufacturing Engineer jobs in Denver, CO

Maintenance Technician jobs in Broomfield, CO

Maintenance Technician jobs in Brighton, CO

Senior Electrical Engineer jobs in Utah

Senior Electrical Engineer jobs in Newport News, VA

Electrical Apprentice jobs in Las Vegas, NV

Senior Electrical Engineer jobs in Fremont, CA

Systems Engineer jobs in Tampa, FL

Senior Electrical Engineer jobs in California

Electrical Apprenticeship Program jobs in West Virginia

Composite Technician jobs in Belmont, CA

Surgical Technician jobs in Saint Paul, MN

Composite Technician jobs in Mountain View, CA

Pharmacy Technician jobs in Scranton, PA

Forensic Technician jobs in Atlanta, GA

Composite Technician jobs in Shorewood Hills, WI

Composite Technician jobs in San Jose, CA

Maternity Patient Care Technician jobs in Dayton, OH

Instrumentation Technician

Instrumentation Technician
Centennial, CO

Quick Apply

Job Details

Full-time
$39 - $50 an hour

Benefits

Health savings account
Relocation assistance
Health insurance
Dental insurance
401(k)
Flexible spending account
Paid time off
Parental leave
Employee assistance program
Vision insurance
401(k) matching
Professional development assistance
Life insurance

Qualifications

LabVIEW
Fabrication
Military
Airframe & Powerplant License
Electrical troubleshooting

Full Job Description

Boom is building Superpower, a first-of-kind industrial gas turbine for AI data centers. It is one of the most instrumentation-intensive programs in energy right now — and none of the data that proves the design works gets collected without the person who installs the sensors, fabricates the harnesses, configures the DAQ, and supports testing/validation of the instrumentation systems. That person is this role.

Not an MRO/Production technician role

Most instrumentation jobs exist inside an established system — LRUs documented, installation procedures approved, calibration standards published. You show up, you follow the procedure, you install to the standard.

This is not that job.

We have engineers designing instrumentation architectures for hardware that has never been built. What we do not have is someone who can sit alongside them, fabricate the harnesses from a wiring diagram, install the sensors on prototype hardware, configure the DAQ system, and push back when a routing won't work as drawn. You are working at the front edge of the program — where the procedure doesn't exist yet and you help write it.

What you'll do

Fabricate, install, and verify wiring harnesses and cable assemblies for engine instrumentation packages — from raw wire through connector termination, continuity check, and build record closeout

Install and bond sensors across all measurement types used in engine and structural testing: pressure transducers, thermocouples and RTDs, strain gauges, accelerometers, load cells, and vibration sensors

Support active test operations — setup, monitoring, troubleshooting, and teardown.

Integrate instrumentation systems — engine health monitoring— per installation drawings.

Perform functional and acceptance tests on installed instrumentation

Troubleshoot anomalies during build and test — document findings, isolate fault sources, and participate in root cause analysis before escalating to engineering

Own your documentation: build records, calibration logs, test data packages, nonconformance reports, and deviation records are part of every task

This job is demanding

You will walk into a program where the instrumentation architecture is still being defined and the wiring diagrams are still being drawn. Sensors won't always fit where they were modeled. Connectors will conflict with structure. Calibration will reveal sensor drift no one anticipated.

Your job is to catch those problems early — before they corrupt test data or delay a test event — and work with engineering to resolve them rather than waiting for a revised drawing.

That requires real hands-on skill, documentation discipline, and the confidence to tell an engineer that the routing won't work before you build it.

You probably have

Hands-on avionics installation, or flight test support experience

Direct experience instrumenting gas turbine, propulsion, or aerospace test articles.

Demonstrated proficiency fabricating wire harnesses and cable assemblies from schematics — not just installing pre-fabricated harnesses

Experience installing and bonding sensors for structural or propulsion test applications

Working knowledge of data acquisition systems: channel configuration, signal conditioning, calibration verification

Disciplined documentation habits and working knowledge of aerospace quality standards (AS9100, MIL-spec awareness)

Experience on experimental, prototype, or R&D programs — not production or steady-state MRO

It would be great if you have

FAA Airframe & Powerplant (A&P) certificate or FCC General Radiotelephone Operator License (GROL)

Military avionics maintenance background — 2A5X4, 15N, AV-8B/F-16/F/A-18 platform experience, or equivalent

Flight test instrumentation experience — strain gauge installation, pitot-static plumbing, onboard data acquisition

NI LabVIEW or IADS/Curtiss-Wright DAQ configuration experience

IPC/WHMA-A-620 or NASA-STD-8739.4 soldering and wire harness certification

Ability to work in both electrical and mechanical domains without hand-holding.

CAD navigation experience — able to open a 3D model and verify sensor location and routing access

Experience supporting test programs where the schedule was real and the pace was unforgiving.

Why Boom

Superpower is the first industrial turbine purpose-built for AI data center loads. The market it is targeting is growing faster than grid infrastructure can serve it. The hardware is novel, the test timeline is aggressive, and the instrumentation that validates it has to be right.

You will be among the first technicians to instrument a Superpower turbine. The calibration records you maintain, the sensors you install, and the anomalies you catch will directly shape whether the design gets validated on schedule — and whether the commercial units that follow it perform as designed.

The engine core is shared with Overture. The skills and instincts you build on Superpower compound across both programs. There is no equivalent role at an established OEM where first-article engine instrumentation is still being figured out in real time.

If instrumenting a turbine that has never existed before — and building the data foundation that proves it works — is the job you have been waiting for, apply.

Compensation

The Base Rate for this position is $39 - $50 per hour. Actual rate will vary based on factors including but not limited to location, experience, and performance. The range listed is just one component of Boom’s total rewards package for employees. Other rewards may include long term incentives/equity, a flexible PTO policy, and many other progressive benefits.

There is no set deadline to apply for this job opportunity. Applications will be accepted on an ongoing basis until the search is no longer active.

ITAR Requirement

To conform to U.S. Government aerospace technology export regulations (ITAR and EAR), applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about ITAR here.

Boom is an equal opportunity employer and we value diversity. All employment is decided on the basis of qualifications, merit and business need.

Want to build a faster future? Come join Boom.

Pay: $39.00 - $50.00 per hour

Benefits:

401(k)
401(k) matching
Dental insurance
Employee assistance program
Flexible spending account
Health insurance
Health savings account
Life insurance
Paid time off
Parental leave
Professional development assistance
Relocation assistance
Vision insurance

Work Location: In person

Quick Apply

Refine Your Search

avionics technician jobs in denver, co

Instrumentation Technician

Engineer II - Electrical - Test Systems

Avionics Aviation Maintenance Technician 145 Lead

Sr 145 Technician -- Avionics Tech

Aircraft Mechanic / A&P Technician, Piston Aircraft - APA Airport

AVIONICS TECHNICIAN - FT

Avionics Technician (Multiple Levels)

Avionics Installation Technician

Electrical Aircraft Technician

Avionics Aircraft Technician

Avionics Technician III

Unmanned Aircraft Technician

Aircraft Maintenance Technician

Technician Specialist

Composite Technician (All Levels)

Maintenance Technician - Colorado

Manufacture Engineering Technician

Electrical Engineer III - 2D Harness Design

Aviation Maintenance Technician

Sr Electrical Engineer - Harness Design 3D

I want to receive the latest job alert for avionics technician in denver, co

Explore jobs in more locations

Job Seeker Tools

Employer Tools

Browse

Stay Connected