Machine Shop (CNC Operators)
FOX Factory, Inc. —Gainesville, GA
- Full-time
- No experience needed
- High school diploma or GED
- Ability to lift 50 pounds
- Disability insurance
- Health insurance
CNC Operator
Hydro —Gainesville, GA
- $25.25 an hour
- 12 hour shift
- Mid-level
- High school diploma or GED
- Cleaning
- Disability insurance
- Health insurance
9d
CNC Operator
MP Equipment, LLC —Gainesville, GA
- In-person
- Entry level
- Health savings account
- Disability insurance
Quick Apply
CNC Operator - Steering Machining
Astemo —Monroe, GA
- Writing skills
- Pass drug screening
- No experience needed
CNC Operator - Steering
Astemo —Monroe, GA
- Writing skills
- Pass drug screening
- No experience needed
CNC Operator F Shift
Astemo —Monroe, GA
- Writing skills
- Pass drug screening
- No experience needed
CNC Operator - VTC E Shift
Astemo —Monroe, GA
- Writing skills
- Pass drug screening
- No experience needed
Machine Shop (CNC Op IV & CNC V) - all shifts
FOX Factory, Inc. —Gainesville, GA
- Full-time
- High school diploma or GED
- Ability to lift 50 pounds
- 4 years
- Employee discount
1d
CNC Operator- VTC D Shift
Astemo —Monroe, GA
- Writing skills
- Pass drug screening
- No experience needed
Operator (Hourly)
JBT Marel —Gainesville, GA
- Full-time
- Entry level
Machinist 1
Commerce Pump LLC —Commerce, GA
- Full-time
- Basic math
- Mid-level
- High school diploma or GED
Quick Apply
Machine Operator 2nd Shift Metals
IMS Gear Georgia, LLC —Gainesville, GA
- $17 - $25 an hour
- Full-time
- Computer literacy
- High school diploma or GED
- Ability to lift 50 pounds
- Paid holidays
- Disability insurance
Quick Apply
Machinist 1
Roper Pump Company LLC —Commerce, GA
- Full-time
- Basic math
- Mid-level
- High school diploma or GED
Quick Apply
Machine Shop Lead
Benchmark Automation LLC —Statham, GA
- Overtime
- Management
- Mid-level
- High school diploma or GED
- Wellness program
- Health insurance
CNC Operator
MCNAUGHTON-MCKAY ELECTRIC CO —Suwanee, GA
- Full-time
- Computer literacy
- Mid-level
- High school diploma or GED
Quick Apply
Machine Operator
pdblowers —Gainesville, GA
- $18 - $23 an hour
- Full-time
- Forklift
- High school diploma or GED
- Driver's License
- Paid holidays
- Health insurance
Wire EDM/CNC/machinist
Insert Molding Solutions —Cumming, GA
- $18 - $26 an hour
- Full-time
- In-person
- Mechanical knowledge
- Entry level
- Dental insurance
- Paid time off
Quick Apply
Operator, Machinist, Poultry, NA
JBT Marel —Gainesville, GA
- Full-time
- Mid-level
- Trade school
- Experience equivalent to degree accepted
Line Assist - Steering (Various shifts)
Astemo —Monroe, GA
- Overtime
- Writing skills
- Basic math
- Pass drug screening
Team Lead - Steering Assembly (A shift)
Astemo —Monroe, GA
- Overtime
- 5 years
- Writing skills
- Basic math

I want to receive the latest job alert for cnc operator in braselton, ga

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

Explore jobs in more locations

cnc operator jobs near braselton, ga

Machine Shop (CNC Operators)

FOX Factory, Inc. -
Gainesville, GA

Apply Now

Job Details

Full-time

Benefits

Disability insurance
Health insurance
Dental insurance
Flexible spending account
Vision insurance
401(k) matching
Employee discount
Life insurance

Qualifications

High school diploma or GED
Machine operation safety procedures
Decision making

Full Job Description

What We Do

FOX Factory designs, engineers, manufactures and markets performance-defining products and systems for customers worldwide. Our premium brand, performance-defining products and systems are used primarily on bicycles, side-by-side vehicles, on-road vehicles with and without off-road capabilities, off-road vehicles and trucks, all-terrain vehicles, snowmobiles, specialty vehicles and applications, motorcycles, and commercial trucks. Some of our products are specifically designed for and marketed to a variety of leading cycling and powered vehicle original equipment manufacturers ("OEMs"), while others are distributed to consumers through a global dealer and distribution network. Fox Factory Holding Corp. is the holding company of FOX Factory, Inc. and is publicly traded (FOXF) on Nasdaq.

Why you should join us

Not only do we provide competitive wages, you will also have access to great benefits and employee discounts. But more importantly, it’s a fun environment where we truly enjoy working as a team and bringing great products to our customers!

If this sounds like something you would love to do, and a place you want to be a part of, get in touch with us by submitting your application. We look forward to hearing from you!

1st Shift: Monday–Thursday, 6:00 AM – 4:30 PM

2nd Shift: Monday–Thursday, 4:15 PM – 2:45 AM | $3 shift differential

Weekend Day Shift: Friday–Sunday, 6:00 AM – 6:30 PM | $5 shift differential

Weekend Night Shift: Friday–Sunday, 6:00 PM – 6:30 AM | $6 shift differential

Position Summary:

A CNC Operator, or CNC Machine Operator, is responsible for overseeing the daily functions of manufacturing machinery. Their duties include running tests before the start of operations, Operator will load, unload, and inspect parts during the machining process. Operator will be responsible for the quality of the parts being produced and for achieving production standards. This position requires de-burring, polishing, and cleaning parts at the machine on some work. Inspecting machinery at the end of each shift to identify parts needing repair.

Position Responsibilities:

This position requires de-burring, polishing, and cleaning parts at the machine on some work.

Operates CNC machines with routine supervision.
Performs basic math calculations, including addition and subtraction of decimals.
Maintains dimensional tolerances between ±.0003”-.005” or greater.
Interprets basic dimensions on a print.
Utilizes precision measuring instruments such as calipers, micrometers, gauge pins, etc.
Loads, unloads, and inspects parts being machined while maintaining published PPH.
Operates a minimum of 1 bar feed lathe, or a Mill along with performing secondary operations.
Maintains accurate part counts, fills out Box Tags, and Job/Quantity Tracker.
Reports and asks supervisor/lead for assistance with any machining problems.
Follows documented operator procedures such as inspection check sheets and posted operator notes
Maintains a clean work area and observes all safety procedures
Can execute machine offsets and insert changes with direction of supervisor or lead-person.
Produces parts with less than 2% scrap rate on a consistent basis.
Check and maintain machinery daily to ensure functionality
Practices safe work habits, maintains clean working environment, and performs routine preventative maintenance and other duties as directed

Specific Knowledge, Skills or Abilities Required:

Effective time management and organizational skills.
Detail oriented and capable of multi-tasking.
Excellent judgment and decision-making capabilities.
Safety oriented
Must be able to lift-up to 50 pounds

CNC Machine Operators – Schedule

1st Shift: Monday–Thursday, 6:00 AM – 4:30 PM
2nd Shift: Monday–Thursday, 4:15 PM – 2:45 AM | $3 shift differential

Weekend Day Shift: Friday–Sunday, 6:00 AM – 6:30 PM | $5 shift differential
Weekend Night Shift: Friday–Sunday, 6:00 PM – 6:30 AM | $6 shift differential

Education:

HS graduate or equivalent.

Experience:

No experience required. 1+ yrs. prior experience preferred working with controls and instrumentation, equipment maintenance

Work Environment and Physical Requirements:

Activity

Constantly - 6+ hours : Stand, Walk, Twist/Turn, Stoop/Bend, Squat, Kneel

Frequently - 3 to 6 hrs. : Lift to 50 lbs.

Occasionally - 1 to 3 hrs. : Reach above shoulders

Indoor: 100% of Time

Strong odors

High Noise (80-100 dB)

High Vibration

Power Industrial Vehicle Hazards

Uneven Surfaces

Working from Heights

Mechanical, Chemical and Electrical Hazards

Disclaimer : This list does not represent all physical demands. Descriptions are representative of those that must be met by employee to successfully perform the essential functions of the job. Reasonable accommodation may be provided to enable individuals with disabilities to perform the jobs’ essential functions.

Note:

FOX provides equal employment opportunities for all employees and applicants for employment without regard to race, color, ancestry, national origin, gender, gender identity, sexual orientation, marital status, religion, age, physical disability (including HIV and AIDS), mental disability, results of genetic testing, or service in the military, or any other characteristic protected by the laws or regulations of any jurisdiction in which we operate. We base all employment decisions –including recruitment, selection, training, compensation, benefits, discipline, promotions, transfers, layoffs, terminations and social/recreational programs – on merit and the principles of equal employment opportunity.

Fox offers an excellent compensation package and wide-ranging opportunities for professional development. Medical, Dental, Vision, Health Spending and Dependent Care Savings Accounts, Disability and Life Insurance benefit programs are available, as is a 401k plan with employer matching. Eligibility for all benefit programs is defined by the applicable plan document or employee handbook.

Apply Now

Refine Your Search

cnc operator jobs in braselton, ga

Machine Shop (CNC Operators)

CNC Operator

CNC Operator

CNC Operator - Steering Machining

CNC Operator - Steering

CNC Operator F Shift

CNC Operator - VTC E Shift

Machine Shop (CNC Op IV & CNC V) - all shifts

CNC Operator- VTC D Shift

Operator (Hourly)

Machinist 1

Machine Operator 2nd Shift Metals

Machinist 1

Machine Shop Lead

CNC Operator

Machine Operator

Wire EDM/CNC/machinist

Operator, Machinist, Poultry, NA

Line Assist - Steering (Various shifts)

Team Lead - Steering Assembly (A shift)

I want to receive the latest job alert for cnc operator in braselton, ga

Explore jobs in more locations

What We Do

Why you should join us

Job Seeker Tools

Employer Tools

Browse

Stay Connected