Top 416 electronics technician Jobs in maple grove mn

Electronics Technician
Amphenol CIT —Minneapolis, MN
- $26 - $35 an hour
- Full-time
- English
- Mid-level
- Databases
- Health insurance
- Dental insurance
Quick Apply
Low Voltage Technician (Fire Alarm, Security, Access Control)
J Becher & Associates Inc —Rogers, MN
- $39.98 - $44.08 an hour
- Construction site
- Ability to walk for extended periods
- 5 years
- Fuel card
- Disability insurance
Quick Apply
Electronics Technician
Cinch Systems, Inc. —Saint Michael, MN
- $58,500 - $70,000 a year
- Full-time
- Background check
- Schematics
- Mid-level
- Paid holidays
- Disability insurance
Quick Apply
2d
Biomedical Equipment Technician
Gopher Medical —Waconia, MN
- $50,000 - $75,000 a year
- Full-time
- Background check
- Engineering
- Travel
- Paid training
- Health insurance
Quick Apply
Automation Technician - (Mechanical or Electrical and Mechatronics)
DT Engineering —Maple Grove, MN
- $25 - $40 an hour
- Overtime
- Up to 50% travel
- 5 years
- System design
- Health insurance
- Dental insurance
Quick Apply
Traveling Field Technician
Flock —Maple Grove, MN
- $60,000 - $65,000 a year
- Email
- Up to 50% travel
- Inventory management
- Customer service
- Paid parental leave
- Fuel card
New Product Introduction Pilot Operator III
Philips —Plymouth, MN
- $19.01 - $30.40 an hour
- Full-time
- High school diploma or GED
- Assembly
- US work authorization
- Health savings account
- Employee stock purchase plan
11d
Electrical Technician
Kolstad Company —Minneapolis, MN
- $25 - $35 an hour
- Full-time
- Mid-level
- Power tools
- In-person
- Health insurance
- Dental insurance
Quick Apply
9d
Electrical Equipment Service Technician
Esch Construction Supply, Inc. —Saint Paul, MN
- $26 - $29 an hour
- Full-time
- Background check
- 18 years or older
- Schematics
- Health savings account
- Health insurance
Quick Apply
Journeyman Electrician
Circle Electric —Elk River, MN
- $46 - $60 an hour
- Full-time
- Management
- Construction site
- 5 years
- Health savings account
- AD&D insurance
Quick Apply
10d
Level 2 Security Technician
EdinAlarm —Edina, MN
- $25 - $35 an hour
- Full-time
- Customer service
- Mid-level
- Residential
- Health insurance
- Dental insurance
Quick Apply
11d
Industrial/Commercial Journeyman Electrician
Daley Electric, LLC —Minneapolis-Saint Paul, MN
- $54 - $60 an hour
- Full-time
- Mid-level
- Driver's License
- Programmable logic controllers
- Fuel card
- Health savings account
Quick Apply
2d
Experienced Installation Technician
Wellington Security Systems —Minneapolis, MN
- $20 - $38 an hour
- Full-time
- Computer literacy
- Writing skills
- Mid-level
- Health insurance
- Dental insurance
Quick Apply
6d
1st Shift Sensor Assembler & Laser Welder
Product Development Solutions Inc —Blaine, MN
- $18 - $21 an hour
- Full-time
- English
- In-person
- Entry level
- Health savings account
- Health insurance
Quick Apply
2d
Technician III
Apollo Professional Solutions, Inc. —Maple Grove, MN
- $30.00 - $34.83 an hour
- Weekends as needed
- Mid-level
- Continuous improvement
- In-person
- Health insurance
- Dental insurance
Quick Apply
5d
Electrician/Journeyman/Apprentice (must have 2 years experience)
Sunrise Electric —Minneapolis-Saint Paul, MN
- $15 - $29 an hour
- 8 hour shift
- Construction site
- Mid-level
- Residential
- Paid holidays
- Health insurance
Quick Apply
Service Technician
Patterson —Minneapolis, MN
- $20.91 - $27.16 an hour
- Full-time
- Carpentry
- Clean driving record
- Microsoft Excel
- Wellness program
- Paid parental leave
Control Panel Technician
E-Technical Staffing Inc. —Minneapolis, MN
- $21 - $23 an hour
- 8 hour shift
- Assembly
- US work authorization
- In-person
- Health insurance
- Dental insurance
Quick Apply
Electromechanical Assembler
TASC Technical Services LLC —Plymouth, MN
- $25 - $29 an hour
- Full-time
- Mid-level
- High school diploma or GED
- In-person
- Health insurance
- 401(k)
Quick Apply
6d
LEAD SERVICE TECHNICIAN (MOVE TEAM) (FULL TIME)
Canteen —Minneapolis, MN
- $25 - $30 an hour
- Urgently hiring
- Background check
- Mid-level
- Supervising experience
- Commuter assistance
- Disability insurance
Quick Apply

I want to receive the latest job alert for electronics technician in maple grove mn

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

Explore jobs in more locations

electronics technician jobs near maple grove mn

Assembler jobs in Blaine, MN

Field Technician jobs in Maple Grove, MN

Journeyperson Electrician jobs in Elk River, MN

Assembler jobs in Plymouth, MN

Electrical Technician jobs in Minneapolis, MN

Installation Technician jobs in Minneapolis, MN

Lead Technician jobs in Minneapolis, MN

Calibration Technician jobs in Minneapolis, MN

Service Technician jobs in Minneapolis, MN

Apprentice Electrician jobs in Minneapolis-Saint Paul, MN

Control Panel Technician jobs in Minneapolis, MN

Assembler jobs in West Valley City, Ut

Assembler jobs in Manchester, Nh

Production Assembler jobs in Ewing, Nj

Biomedical Engineering jobs in Providence, Ri

Biomedical Equipment Technician jobs in Pittsburgh, Pa

Biomedical Engineering jobs in St. Louis, Mo

Biomedical Equipment Technician jobs in Richmond, Va

Ophthalmic Technician jobs in Santa Clarita, Ca

Sterile Processing Technician jobs in Richmond, Va

Electronics Technician

Amphenol CIT
Minneapolis, MN

Quick Apply

Job Details

Full-time
$26 - $35 an hour

Benefits

Health insurance
Dental insurance
401(k)
Paid time off
Vision insurance
401(k) matching
Life insurance

Qualifications

Electronic meters
Calibration
ISO standards
Electrical equipment calibration
Electronic systems troubleshooting
Electrical schematic reading and interpretation
Equipment troubleshooting
English
Electronic parts
Electrical experience
Troubleshooting electrical systems
Blueprint dimension interpretation
Surface mount soldering
Blueprint reading
Manual handling
Clamp meters
Electronic circuit boards
Associate's degree
Through-hole technology (THT)
Adobe Acrobat
Quality control calibration

Full Job Description

SUMMARY

Supports manufacturing and service cells in test, service, and calibration of ACIT Sensor products. Responsible for performing all levels of calibrations, test setups, data collection, and/or data analysis using recognized methodologies based upon a combination of experience and written procedures. Utilizes analog and digital calibration techniques to sync a driver to a probe at a certain distance and frequency while looking at a specified target material.

ESSENTIAL JOB FUNCTIONS

Manufacturing Support

· Calibrates Capacitive and Inductive measurement systems

· Performs final assembly and test of Customer product

· Performs troubleshooting of electronic circuit assemblies

· Performs Customer requested tests and reports results

· Works with Engineering on difficult or new product calibrations

· Maintains customer calibration records and databases

· Drives quality and efficiency improvements in calibration area Service

· Troubleshoots and repairs customer product sent for service or calibration

· Calibrates repaired systems

· Assists in final test and calibration or setup of sensor products

· Setups and configures sensor products

· Other duties as required in support of the department and the company

SUPERVISOR RESPONSIBILITIES

This position does not have any supervisory responsibilities

QUALIFICATIONS

To perform this job successfully, an individual must be able to perform each essential job function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE

Appropriate education and/or experience may be substituted on equivalent basis

· Associate Degree in Electronics preferred

· Two (2) years of calibration experience within the last five (5) years in a private, public, government, or military environment required

· Minimum one (1) year calibration experience operating to ISO 9001 standards

· Ability to apply deductive logic to troubleshoot failed circuits to sub-assembly and/or component level in analog and mixed signal systems.

· Basic electronics knowledge

· Analog and Digital Circuitry

· Understanding of electronic schematics

· Knowledge of test equipment (Power Supplies, Scopes, Generators, Meters, and other Test Equipment)

· Surface mount and through hole soldering

· ESD Conformance

· Software:

o MS Office

o Visual

o Acrobat

CERTIFICATES, LICENSES, REGISTRATIONS

IPC620 or J-Std Soldering Certification preferred (active/inactive)

LANGUAGE SKILLS

· Ability to read, write, speak, and understand English.

· Proficient written and verbal communication skills.

· Ability to read and understand verbal and written instructions, read blueprints, drawings, and schematics.

JOB SKILLS

· Demonstrates good judgment and decision-making skills

· Ability to work with minimal supervision

· Reliable and flexible to work additional hours on short notice to complete orders and/or special projects to meet customer demands

· Understanding and experience in Lean manufacturing environment preferred. Participate in continuous improvement projects and 5S related performance teams.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle or feel, and talk or hear. The employee frequently is required to reach with hands and arms. The employee is required to stand and walk. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

WORK ENVIRONMENT

Amphenol CIT is a clean facility, housing different machinery, equipment, processes, and chemicals which produce potential hazards in the work environment such as ergonomic, chemical, machine point of operation. These hazards are controlled through means of engineering controls, such as machine guarding, and administrative controls, such as safety policies and programs. In certain areas of the facility, employees are required to wear Personal Protective equipment such as Hearing Protection, Safety Glasses and hand protection.

PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTS

· Clear ANSI Z87.1 safety rated glasses

· Ability to compile with JSA in specific areas

ENVIRONMENTAL POLICY

Amphenol CIT is dedicated to identifying and reducing the environmental impact of its operations, activities, and products. It is our commitment to comply with all applicable laws and other regulatory requirements concerning the environment. We are committed to preventing pollution and continually improving our environmental performance in all our global operations. This will be achieved through a comprehensive Environmental Management System that provides the framework for setting and reviewing environmental objectives and targets of Amphenol.

EXPORT COMPLIANCE DISCLAIMER

This position includes access or potential access to ITAR and/or EAR technical data. Therefore, candidates will need to qualify as a US Person which is defined as a US Citizen, or a Permanent Resident (Green Card Holder).

TRAVEL

Up to 5%; travel extremely rare.

SALARY INFORMATION:

According to several states' laws, this position's salary range falls between $26 and $35 per hour. However, this salary information is merely a general guideline. When extending an offer, Amphenol CIT considers various factors such as the position's responsibilities, scope of work, candidate's work experience, education/training, essential skills, internal pay equity, and market considerations.

Job Type: Full-time

Pay: $26.00 - $35.00 per hour

Benefits:

401(k)
401(k) matching
Dental insurance
Health insurance
Life insurance
Paid time off
Vision insurance

Work Location: In person

Quick Apply

Refine Your Search

electronics technician jobs in maple grove mn

Electronics Technician

Low Voltage Technician (Fire Alarm, Security, Access Control)

Electronics Technician

Biomedical Equipment Technician

Automation Technician - (Mechanical or Electrical and Mechatronics)

Traveling Field Technician

New Product Introduction Pilot Operator III

Electrical Technician

Electrical Equipment Service Technician

Journeyman Electrician

Level 2 Security Technician

Industrial/Commercial Journeyman Electrician

Experienced Installation Technician

1st Shift Sensor Assembler & Laser Welder

Technician III

Electrician/Journeyman/Apprentice (must have 2 years experience)

Service Technician

Control Panel Technician

Electromechanical Assembler

LEAD SERVICE TECHNICIAN (MOVE TEAM) (FULL TIME)

I want to receive the latest job alert for electronics technician in maple grove mn

Related Searches

Explore jobs in more locations

Job Seeker Tools

Employer Tools

Browse

Stay Connected