Electro Mechanical Technician
GE Aerospace —Bohemia, NY
- $86,000 - $110,000 a year
- Full-time
- Pass drug screening
- Mid-level
- 3 years
- Paid parental leave
- Disability insurance
4d
Aircraft Mechanic / A&P Technician, Piston Aircraft - ISP Airport
ATP Flight School —Ronkonkoma, NY
- $30 - $40 an hour
- Full-time
- Mid-level
- Ability to lift 25 pounds
- Under 1 year
- Paid holidays
- Disability insurance
Quick Apply
Avionics Technician / Installer
Murray Avionics Inc —Scotia, NY
- $28 - $45 an hour
- Full-time
- Mid-level
- In-person
- 1 year
- 401(k)
- Paid time off
Quick Apply
10d
Radio Frequency Technician
Aero Instruments & Avionics —Depew, NY
- $22 - $30 an hour
- Full-time
- Background check
- Pass drug screening
- Mid-level
- Health savings account
- Health insurance
Quick Apply
Calibration Technician III
Transcat, Inc. —Rochester, NY
- $29 - $35 an hour
- Microsoft Excel
- Microsoft Outlook
- Research
- Employee stock purchase plan
- Health insurance
Aircraft Maintenance Technician - RW
Med-Trans Corporation —Wappingers Falls, NY
- $65,239 - $94,567 a year
- Urgently hiring
- Customer service
- Mid-level
- High school diploma or GED
Senior Engineering Lab Technician
Safe Flight Instrument —White Plains, NY
- $65,000 - $85,000 a year
- Full-time
- Mid-level
- Mentoring
- In-person
- Tuition reimbursement
- Paid time off
Quick Apply
Avionics Technician
Finger Lakes Wing and Rotor —Seneca Falls, NY
- From $30 an hour
- Full-time
- Mid-level
- Power tools
- In-person
- Health insurance
- 401(k)
Quick Apply
Private Jet Aviation Mechanic
Starboard Staffing —New Windsor, NY
- $150,000 - $200,000 a year
- Extended hours
- Clean driving record
- Research
- Continuous improvement
- Health insurance
- Paid time off
Quick Apply
1d
Sr. Calibration Technician
Transcat, Inc. —Rochester, NY
- $35 - $45 an hour
- Microsoft Excel
- Microsoft Outlook
- Research
- Employee stock purchase plan
- Health insurance
1d
Calibration Technician (ALL Levels)
Transcat, Inc. —Rochester, NY
- $19 - $38 an hour
- Microsoft Excel
- Microsoft Outlook
- Up to 50% travel
- Employee stock purchase plan
- Health insurance
Aviation Maintenance Technician 135 Sr Pool
Air Methods —New York, NY
- $39.50 - $45.00 an hour
- Overtime
- Microsoft Excel
- Microsoft Outlook
- Mechanic experience
Quick Apply
Aircraft Maintenance Technician - RW Float
Med-Trans Corporation —New York, NY
- $65,239 - $113,480 a year
- Overtime
- Mid-level
- High school diploma or GED
- Ability to lift 50 pounds
Electronics Technician
INRCORE —Hauppauge, NY
- $20 - $24 an hour
- Part-time
- Microsoft Excel
- Microsoft Outlook
- Ability to walk for extended periods
- AD&D insurance
- Paid holidays
Quick Apply
SkillBridge Applicants - Calibration Technician
Transcat, Inc. —Rochester, NY
- $21 - $45 an hour
- Microsoft Excel
- Microsoft Outlook
- Laboratory experience
- Employee stock purchase plan
- Health insurance
Equipment Setup Technician
Gowanda Electronics —Gowanda, NY
- $18 - $22 an hour
- Full-time
- Ability to walk for extended periods
- Mid-level
- High school diploma or GED
- AD&D insurance
- Paid holidays
Quick Apply
Experienced Critical Power Field Technician (UPS Field Engineer)
Pearce Services —Garden City, NY
- $35 - $50 an hour
- On call
- Background check
- Clean driving record
- Customer service
- Health savings account
- Paid holidays
Quick Apply
Electronics Technician
Aero Instruments & Avionics —Depew, NY
- $22 - $30 an hour
- Full-time
- Background check
- Pass drug screening
- Mid-level
- Health savings account
- Health insurance
Quick Apply
Production Lead / Line Supervisor
Dyco Electronics —Hornell, NY
- $21.00 - $26.50 an hour
- Full-time
- Mid-level
- 3 years
- Supervising experience
- AD&D insurance
- Paid holidays
Quick Apply
2d
Military Service - U.S. Navy, Aviation Electronics, Electrical & Computer Systems Technician
U.S. Navy —United States
- $30,000 - $80,000 a year
- Weekends as needed
- Background check
- Laboratory
- Mid-level
- Loan repayment program
- Health insurance
2d

I want to receive the latest job alert for avionics technician in new york state

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

Explore jobs in more locations

avionics technician jobs near new york state

Aircraft Maintenance Technician jobs in New York, NY

Calibration Technician jobs in Rochester, NY

Aircraft Mechanic jobs in Ronkonkoma, NY

Aircraft Maintenance Technician jobs in Youngstown, OH

Aircraft Maintenance Technician jobs in Denton, TX

Aircraft Maintenance Technician jobs in Nashua, NH

Apartment Maintenance jobs in Baltimore, MD

Aircraft Maintenance Technician jobs in Clarksdale, MS

Trail Maintenance jobs in Indiana

Evidence Technician jobs in California

Calibration Technician jobs in Cherry Hill, NJ

Calibration Technician jobs in Biloxi, MS

Pharmacy Technician jobs in Evansville, IN

Pharmacy Technician jobs in La Crosse, WI

Calibration Technician jobs in Brooklyn, NY

Calibration Technician jobs in Goldsboro, NC

Veterinary Technician jobs in Pensacola, FL

Avionics Technician jobs in Akron, OH

Avionics Technician jobs in Remote

Avionics Technician jobs in Eglin Afb, FL

Electro Mechanical Technician

GE Aerospace -
Bohemia, NY

Apply Now

Job Details

Full-time
$86,000 - $110,000 a year
4 days ago

Benefits

Paid parental leave
Disability insurance
Relocation assistance
Health insurance
Dental insurance
Tuition reimbursement
Paid time off
Adoption assistance
Parental leave
Employee assistance program
Vision insurance
401(k) matching
Life insurance
Prescription drug insurance

Qualifications

Cable systems installation
Mechanical blueprint interpretation
Electronic meters
Fabrication
Digital multimeters
Cable assembly
Electrical schematic reading and interpretation
Soldering tools
Electronics voltage testing
High school diploma or GED
Mechanical drawings
Measuring instruments
Electronic connectors
Mechanical assembly experience within aerospace industry
Oscilloscopes
Equipment testing
Electrical connectors
Electrical soldering
Wire harness assembly

Full Job Description

Job Description Summary

Job Description

Job responsibilities require both independent, self-directed efforts, as well as team efforts working together with engineers and other technicians. You will work closely with our engineering and technical team to assemble, integrate, and test ground and flight systems for advanced aerospace applications. You will be responsible for the electronic and mechanical assembly, integration, checkout, and maintenance of prototype hardware and flight-ready systems. Applications for our development include advanced aircraft and propulsion systems, avionics and control systems, ground support equipment, as well as flight test instrumentation systems.

You will be expected to have strong attention to detail and the ability to work with both electronic components and mechanical assemblies. You will handle sensitive electronic equipment, precision mechanical parts, flight-critical hardware, and ground support systems. Some travel to external facilities (GE or customer sites) may be needed to support integration activities, system checkouts, or flight test campaigns.

The job will require moderate lifting of hardware up to 50 pounds, working in confined spaces, climbing ladders, and potentially working at elevated heights during system installation. In support of integration and testing activities, duties will include hardware preparation, system checkout procedures, working through detailed assembly and test checklists, and participating in integrated system tests. General housekeeping duties will also be expected, including the arrangement of tools and equipment, organization of parts and storage areas, electrostatic discharge (ESD) control, and overall work area cleanliness. Additionally, specialized cleaning and handling procedures shall be followed as required for flight hardware and clean-room environments.

Responsibilities:

Perform electronic assembly including soldering, wire harnessing, circuit board installation, and connector assembly for ground and flight systems.
Read and interpret electrical schematics, wiring diagrams, mechanical drawings, and engineering specifications.
Assemble and integrate mechanical components with electrical and electronic subsystems.
Install, terminate, and test wiring and cable assemblies per IPC-A-620 and aerospace workmanship standards.
Perform functional checkout and troubleshooting using multimeters, oscilloscopes, and test equipment.
Conduct continuity checks, resistance measurements, and voltage/current testing to verify system functionality.
Collaborate with engineers to resolve assembly issues and support root cause analysis.
Document assembly procedures, test results, and as-built configurations per quality requirements.
Perform rework and modifications per engineering change orders.
Utilize hand tools, precision measuring instruments, crimping tools, torque wrenches, and power tools.
Support integration of ground test systems and flight hardware, including instrumentation and sensor installation.
Maintain organized work areas
Perform periodic maintenance and calibration checks on test equipment and tools.
Support flight system testing including pre-flight checkouts, ground operations, and post-flight inspections.

Requirements:

High School Diploma or GED. Associate's degree or technical certification in electronics or avionics preferred.
At least three (3) years of experience in electronic assembly, wire harnessing, and electro-mechanical integration. Aerospace or defense experience is highly desirable.
Experience reading electrical schematics, wiring diagrams, mechanical drawings, and assembly procedures.
Proficiency in soldering, wire termination, connector assembly, and cable fabrication meeting IPC standards.
Experience with electronic test equipment including multimeters, oscilloscopes, and data acquisition systems.
Ability to obtain and maintain U.S. secret clearance. U.S. citizenship required.
Ability to obtain and maintain ATF clearance.

Additional / Preferred Skills:

Experience with avionics systems, flight instrumentation, or aircraft electrical systems.
Familiarity with MIL-STD specifications and aerospace quality standards (AS9100).
Proficiency with CAD software for viewing mechanical drawings and electrical schematics (e.g., Altium, NX).
Experience with LabVIEW, MATLAB, or other data acquisition and analysis software.
Experience with crimping and connector assembly for aerospace applications (Deutsch, Amphenol, circular connectors).
Familiarity with composite materials handling and bonding techniques.
Experience working in cleanroom or controlled environments.
Familiarity with pneumatic and hydraulic systems integration.
Active Secret or Top Secret security clearance.
Previous experience supporting flight test operations or ground test campaigns.
Strong written and verbal communication skills for technical documentation.

The base pay range for this position is $86,000 - $110,000 USD Annual. The specific pay offered may be influenced by a variety of factors, including the candidate’s experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on December 31st, 2026.

GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness.

GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a “Sponsor”). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor’s welfare benefit plan or program. This document does not create a contract of employment with any individual.

This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)).

Additional Information

GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Employees may also be subject to random and reasonable-suspicion drug and alcohol testing.

Relocation Assistance Provided: Yes

Apply Now

Refine Your Search

avionics technician jobs in new york state

Electro Mechanical Technician

Aircraft Mechanic / A&P Technician, Piston Aircraft - ISP Airport

Avionics Technician / Installer

Radio Frequency Technician

Calibration Technician III

Aircraft Maintenance Technician - RW

Senior Engineering Lab Technician

Avionics Technician

Private Jet Aviation Mechanic

Sr. Calibration Technician

Calibration Technician (ALL Levels)

Aviation Maintenance Technician 135 Sr Pool

Aircraft Maintenance Technician - RW Float

Electronics Technician

SkillBridge Applicants - Calibration Technician

Equipment Setup Technician

Experienced Critical Power Field Technician (UPS Field Engineer)

Electronics Technician

Production Lead / Line Supervisor

Military Service - U.S. Navy, Aviation Electronics, Electrical & Computer Systems Technician

I want to receive the latest job alert for avionics technician in new york state

Explore jobs in more locations

Job Description Summary

Job Description

Additional Information

Job Seeker Tools

Employer Tools

Browse

Stay Connected