Top 168 Electrical designer Jobs in Raleigh Nc

Sr. Hardware Engineer-North Carolina
Allied Telesis —Cary, NC
- $110,000 - $130,000 a year
- Full-time
- 6 years
- Research
- Mentoring
Quick Apply
Distribution Engineer
Primary Talent Partners —Durham, NC
- $38 - $43 an hour
- Overtime
- Engineering
- Residential
- Mentoring
Quick Apply
8d
Substation Project Engineer III
ACS Professional Staffing —Raleigh, NC
- Full-time
- Management
- 5 years
- Continuous improvement
Quick Apply
10d
Assistant Electrical Revit Detailer
GTT, LLC —Cary, NC
- $26 - $30 an hour
- Contract
- Mid-level
- High school diploma or GED
- Analysis skills
- Health insurance
- Dental insurance
Quick Apply
Lead Project Engineer - Utility Solutions
Siemens —Wendell, NC
- $109,670 - $188,006 a year
- Full-time
- Remote
- Engineering
- Mentoring
- US work authorization
12d
Entry Level Electrical Designer/Engineer
Hazen and Sawyer —Raleigh, NC
- Hybrid work
- Bachelor of Science
- Office
- Electrical Engineering
- Paid holidays
- Disability insurance
Quick Apply
Engineer I - Structural
ANS —Raleigh, NC
- $68,200 - $74,700 a year
- Full-time
- Analysis skills
- Civil Engineering
- Python
- Dental insurance
- Vision insurance
Quick Apply
10h
Designer I - Structural
ANS —Raleigh, NC
- $56,400 - $61,800 a year
- Full-time
- Entry level
- Dental insurance
- Vision insurance
Quick Apply
10h
Electrical Designer
exp —Raleigh, NC
- Full-time
- Bachelor of Science
- Engineering
- Electrical Engineering
Electrical Designer / Engineer
Engineered Designs —Cary, NC
- Hybrid work
- Background check
- 5 years
- Bachelor of Science
- Health insurance
- Dental insurance
Electrical Engineering Designer
McKim & Creed, Inc. —Raleigh, NC
- Hybrid work
- 5 years
- Office
- Driver's License
- Paid holidays
- Tuition reimbursement
Quick Apply
Electrical Designer
Salas O'Brien, Inc. —Raleigh, NC
- Hybrid work
- Mid-level
- Office
- 3 years
- Paid holidays
- Health insurance
Electrical Engineer
Ontic —Creedmoor, NC
- $95,000 - $120,000 a year
- Full-time
- 5 years
- Analysis skills
- Senior level
10d
Entry Level Systems Engineer/Controls Specialist
RoviSys Building Technologies —Holly Springs, NC
- $80,000 - $82,000 a year
- Full-time
- System design
- Office
- Team management
- Health insurance
- Dental insurance
PCB Designer
Amphenol Communications Solutions —Raleigh, NC
- Analysis skills
- Experience equivalent to degree accepted
- Associate's degree
Electrical Designer II
DPS Group —Cary, NC
- Full-time
- Mid-level
- Office
- US work authorization
Electrical Designer 3
Strata Solar LLC —Durham, NC
- Office
- 8 years
- Travel
Quick Apply
Electrical Engineer
Videndum —Cary, NC
- $95,000 - $130,000 a year
- Full-time
- Laboratory experience
- 3 years
- Master's degree
- Paid holidays
- Health insurance
Quick Apply
Senior ASIC Verification Engineer
NVIDIA —Durham, NC
- $136,000 - $264,500 a year
- Full-time
- Computer science
- Computer Science
- 5 years
MTS Digital Engineering
Rambus —Morrisville, NC
- $58,000 - $108,000 a year
- Full-time
- Hybrid work
- Bachelor of Science
- Office
- Electrical Engineering
- Employee stock purchase plan
- Health insurance

I want to receive the latest job alert for electrical designer in raleigh nc

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

Explore jobs in more locations

electrical designer jobs near raleigh nc

Sr. Hardware Engineer-North Carolina

Allied Telesis -
Cary, NC

Quick Apply

Job Details

Full-time
$110,000 - $130,000 a year

Qualifications

Network topology design
Power electronics circuit design
Electrical compliance testing
Thermal control
Embedded systems
Research
Network infrastructure
Digital circuit design
Power distribution systems
Low-voltage electrical systems
Design engineering
Printed circuit board (PCB) layout
Product design
Cross-functional collaboration
Cross-functional communication

Full Job Description

Job Summary:

Perform electrical hardware design of printed circuit board assemblies for harsh environment Layer 2 and Layer 3 Industrial Ethernet Switches. Execute hardware verification on new products. Lifecycle support of products from inception to end of life, addressing any field issues that are not managed by the field support personnel. Provide input into Manufacturing processes so product may be successfully manufactured with low overhead. Analyze and interpret new product requirements to ensure design projects meet commercial objectives.

Essential Duties and Responsibilities:

Product design of Layer 2 and Layer 3 access and distribution network switches fully qualified for power utilities, oil and gas, industrial automation and process control, railway transportation (trackside), roadway transportation (traffic control), digital video recording (surveillance cameras), and any installation in outdoor applications.
- DIN-Rail and rack mount design with natural convection (no fans) to survive -40C to 75C outside ambient temperature.
- Design to meet high levels of electromagnetic immunity (10Vrms conducted, and 10V/m radiated), and high levels of lightning surge (4kV).
- Product design of interfaces include the following:
  - DC input and power entry design (24Vdc, 48Vdc, and 110Vdc systems).
  - 10/100/1000Base-T Ethernet.
  - Power over Ethernet (PoE) up to IEEE 802.3bt (95W/port).
  - Fiber optic uplink supporting 100Base-FX, 1000Base-X, 10GBase-SR, 10GBase-LR, 10GBase-ER, and 10GBase-CX4.
Digital circuit board level design.
Low voltage power supply design.
24Vdc, 48Vdc, and 110Vdc power entry design.
Power over Ethernet (PoE) design.
Analog circuit design.
Design of embedded CPU and/or System on a Chip (SoC) complex with DDR3/DDR4 SDRAM, and Flash memory.
Design using Ethernet Switch and PHY IC’s.
Write functional specification, detailed specification, manufacturing test plan and designer test plan/results documents on all products that are developed.
Interpret product requirement documents and translate into design requirements.
Research and select new components to meet design requirements.
Perform power and thermal calculations, and interface with Mechanical Design Engineer for optimal component placement floor plan to aid in thermal simulations.
Provide guidance to PCB layout designer to implement bare PCB design.
Provide EMC specific guidelines to PCB layout designer to meet EMC requirements.
Interact with PCB supplier to design proper PCB stack up, ensuring all design requirements are properly met.
Consider manufacturing limitations and constraints during the design and development of the product to meet Design for Manufacturing (DFM), Design for Test (DFT), and Product Structure Checklist (PSC).
Perform hardware bring up and designer test activities on new designs.
Correct any issues identified during product compliance activities.
Perform system level HW testing to validate proper functionality over the entire operational range of the product.
Perform EMC testing in the lab and support formal EMC compliance testing.
Interact with suppliers and available resources to obtain new knowledge applicable to responsibilities. Share new knowledge with team members.
Provide weekly reports to management on project status and issues.
Review designs of other HW team members in a constructive manner.
Troubleshoot field and factory issues that cannot be resolved by the first level support teams.

Experience, Skills & Abilities:

6+ years with analog and digital design experience.
6+ years with 24Vdc to 110Vdc power and low voltage power design.
Required experience to be considered:
24Vdc to 110Vdc power entry design
Low voltage power supply design

EMC (design and testing for compliance)
Embedded CPU, microprocessor or System on a Chip design
Networking design (1Gb and 10Gb Ethernet copper and optical, Switching, PHY’s, etc)

Experience with Industrial temperature product design.
Experience with programmable logic a plus.
Proficient with schematic entry.
Experience with PCB layout techniques and concepts for high-speed design and EMI compliance.
Experience in designing products to meet Class A and B EMI requirements.
Experience in designing products that meet harsh outdoor environment.
Experience troubleshooting problems and identifying solutions.
Knowledge of industrial temperature design.
Mentoring junior engineers.
Typically reports to manager or head of a department.
Must be able to work independently, receiving a minimum of detailed supervision.
Must be able to maintain professional demeanor during stressful situations.
Must be able to interact positively and productively across functions within the organization.
Must be able to take ownership of responsibilities and actions and effectively handle interpersonal relationships with others.
Must be able to receive and apply feedback to improve performance.
Must be able to prioritize, plan work activities, and use time efficiently.
Must be able to maintain regular, predictable attendance.
Must be able manage shifting priorities and to consistently meet commitments and deadlines.
Must be able to work effectively with multiple interruptions and distractions.
Must be able to commit to necessary hours of work to reach goals.

Education / Training:

BSEE/BSCE

Quick Apply

Refine Your Search

electrical designer jobs in raleigh nc

Sr. Hardware Engineer-North Carolina

Distribution Engineer

Substation Project Engineer III

Assistant Electrical Revit Detailer

Lead Project Engineer - Utility Solutions

Entry Level Electrical Designer/Engineer

Engineer I - Structural

Designer I - Structural

Electrical Designer

Electrical Designer / Engineer

Electrical Engineering Designer

Electrical Designer

Electrical Engineer

Entry Level Systems Engineer/Controls Specialist

PCB Designer

Electrical Designer II

Electrical Designer 3

Electrical Engineer

Senior ASIC Verification Engineer

MTS Digital Engineering

I want to receive the latest job alert for electrical designer in raleigh nc

Related Searches

Explore jobs in more locations

Job Seeker Tools

Employer Tools

Browse

Stay Connected