Top 87 Fiber optic Jobs in Raleigh Nc

Sr. Hardware Engineer-North Carolina
Allied Telesis —Cary, NC
- $110,000 - $130,000 a year
- Full-time
- 6 years
- Research
- Mentoring
Quick Apply
Cabling Technician
Top Prospect Consulting —Raleigh, NC
- $23 - $28 an hour
- Contract
- Mid-level
- Residential
- Driver's License
- Flexible schedule
Quick Apply
3d
Fiber Installation Technician
MasTec Advanced Technologies —Raleigh, NC
- $20 - $24 an hour
- Overtime
- Basic math
- Pass drug screening
- English
- Paid training
- Fuel card
1d
Sr. Principal Electromechanical Engineer
Northrop Grumman —Morrisville, NC
- $135,800 - $213,400 a year
- Overtime
- Master's degree
- Bachelor's degree
- Doctor of Philosophy
- Paid holidays
- Disability insurance
Project Coordinator - Fiber Optic Cabling and Splicing
Team Fishel —Raleigh, NC
- $30 - $38 an hour
- Construction site
- Mid-level
- Travel
- Profit sharing
- Wellness program
OSP Fiber Technician I
ITG Communications —Raleigh, NC
- $28 - $33 an hour
- Full-time
- Customer service
- High school diploma or GED
- Ability to lift 50 pounds
2d
Field Technician I - Raleigh, NC
Lumen Technologies —Raleigh, NC
- $42,975 - $57,299 a year
- Overtime
- Background check
- Pass drug screening
- Windows
Data Center / Lab Technician – 3-Month Contract
dataNet IT —Raleigh, NC
- Full-time
- Laboratory experience
- IT
- Entry level
9d
Telecommunications Cabling Technician
MTS SERVICES INC —Raleigh, NC
- $18 - $35 an hour
- Extended hours
- Construction site
- Mid-level
- Ability to lift 50 pounds
- Paid holidays
- Health insurance
Quick Apply
Fiber Splicing Technician
Hyper Networks LLC —Durham, NC
- $23 - $35 an hour
- Weekends as needed
- Basic math
- English
- Mid-level
Travel Fiber Splicer
Luck Grove Telecom Inc —Raleigh, NC
- $20 - $25 an hour
- Full-time
- Schematics
- Construction site
- Mid-level
Quick Apply
2d
IT Field Engineer
DPR Construction —Raleigh-Durham, NC
- Overtime
- Construction site
- Mid-level
- Office
Data Cable Technician
PKC Technology —Raleigh, NC
- $20 - $25 an hour
- Full-time
- Clean driving record
- Customer service
- Mid-level
Quick Apply
Designer I
Network Building + Consulting —Raleigh, NC
- Hybrid work
- Civil engineering
- Experience equivalent to degree accepted
- 1 year
Quick Apply
Service Operations Specialist
Lumos —Fuquay-Varina, NC
- 18 years or older
- Clean driving record
- Mid-level
- Wellness program
- Health savings account
Quick Apply
Fiber Technicians
Triage-Partners —Raleigh, NC
- Background check
- Customer service
- Computer literacy
Fiber Optic Cable Foreman
Team Fishel —Raleigh, NC
- $28 - $35 an hour
- Weekends as needed
- Background check
- Construction site
- Pass drug screening
- Profit sharing
- Wellness program
Construction Technician Raleigh NC
Segra —Durham, NC
- Full-time
- Microsoft Word
- Microsoft Outlook
- Construction site
- Health savings account
- Paid holidays
Quick Apply
Cable Technician/Installer - Top rates in the area!
SERALEX COMMUNICATIONS —Raleigh, NC
- $1,100 - $1,600 a week
- Full-time
- Mid-level
- Residential
- In-person
Quick Apply
Engineer I
Network Building + Consulting —Raleigh, NC
- Hybrid work
- Bachelor's degree
- Civil Engineering
- Entry level
Quick Apply

I want to receive the latest job alert for fiber optic in raleigh nc

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

Explore jobs in more locations

fiber optic jobs near raleigh nc

Sr. Hardware Engineer-North Carolina

Allied Telesis -
Cary, NC

Quick Apply

Job Details

Full-time
$110,000 - $130,000 a year

Qualifications

Network topology design
Power electronics circuit design
Electrical compliance testing
Thermal control
Embedded systems
Research
Network infrastructure
Digital circuit design
Power distribution systems
Low-voltage electrical systems
Design engineering
Printed circuit board (PCB) layout
Product design
Cross-functional collaboration
Cross-functional communication

Full Job Description

Job Summary:

Perform electrical hardware design of printed circuit board assemblies for harsh environment Layer 2 and Layer 3 Industrial Ethernet Switches. Execute hardware verification on new products. Lifecycle support of products from inception to end of life, addressing any field issues that are not managed by the field support personnel. Provide input into Manufacturing processes so product may be successfully manufactured with low overhead. Analyze and interpret new product requirements to ensure design projects meet commercial objectives.

Essential Duties and Responsibilities:

Product design of Layer 2 and Layer 3 access and distribution network switches fully qualified for power utilities, oil and gas, industrial automation and process control, railway transportation (trackside), roadway transportation (traffic control), digital video recording (surveillance cameras), and any installation in outdoor applications.
- DIN-Rail and rack mount design with natural convection (no fans) to survive -40C to 75C outside ambient temperature.
- Design to meet high levels of electromagnetic immunity (10Vrms conducted, and 10V/m radiated), and high levels of lightning surge (4kV).
- Product design of interfaces include the following:
  - DC input and power entry design (24Vdc, 48Vdc, and 110Vdc systems).
  - 10/100/1000Base-T Ethernet.
  - Power over Ethernet (PoE) up to IEEE 802.3bt (95W/port).
  - Fiber optic uplink supporting 100Base-FX, 1000Base-X, 10GBase-SR, 10GBase-LR, 10GBase-ER, and 10GBase-CX4.
Digital circuit board level design.
Low voltage power supply design.
24Vdc, 48Vdc, and 110Vdc power entry design.
Power over Ethernet (PoE) design.
Analog circuit design.
Design of embedded CPU and/or System on a Chip (SoC) complex with DDR3/DDR4 SDRAM, and Flash memory.
Design using Ethernet Switch and PHY IC’s.
Write functional specification, detailed specification, manufacturing test plan and designer test plan/results documents on all products that are developed.
Interpret product requirement documents and translate into design requirements.
Research and select new components to meet design requirements.
Perform power and thermal calculations, and interface with Mechanical Design Engineer for optimal component placement floor plan to aid in thermal simulations.
Provide guidance to PCB layout designer to implement bare PCB design.
Provide EMC specific guidelines to PCB layout designer to meet EMC requirements.
Interact with PCB supplier to design proper PCB stack up, ensuring all design requirements are properly met.
Consider manufacturing limitations and constraints during the design and development of the product to meet Design for Manufacturing (DFM), Design for Test (DFT), and Product Structure Checklist (PSC).
Perform hardware bring up and designer test activities on new designs.
Correct any issues identified during product compliance activities.
Perform system level HW testing to validate proper functionality over the entire operational range of the product.
Perform EMC testing in the lab and support formal EMC compliance testing.
Interact with suppliers and available resources to obtain new knowledge applicable to responsibilities. Share new knowledge with team members.
Provide weekly reports to management on project status and issues.
Review designs of other HW team members in a constructive manner.
Troubleshoot field and factory issues that cannot be resolved by the first level support teams.

Experience, Skills & Abilities:

6+ years with analog and digital design experience.
6+ years with 24Vdc to 110Vdc power and low voltage power design.
Required experience to be considered:
24Vdc to 110Vdc power entry design
Low voltage power supply design

EMC (design and testing for compliance)
Embedded CPU, microprocessor or System on a Chip design
Networking design (1Gb and 10Gb Ethernet copper and optical, Switching, PHY’s, etc)

Experience with Industrial temperature product design.
Experience with programmable logic a plus.
Proficient with schematic entry.
Experience with PCB layout techniques and concepts for high-speed design and EMI compliance.
Experience in designing products to meet Class A and B EMI requirements.
Experience in designing products that meet harsh outdoor environment.
Experience troubleshooting problems and identifying solutions.
Knowledge of industrial temperature design.
Mentoring junior engineers.
Typically reports to manager or head of a department.
Must be able to work independently, receiving a minimum of detailed supervision.
Must be able to maintain professional demeanor during stressful situations.
Must be able to interact positively and productively across functions within the organization.
Must be able to take ownership of responsibilities and actions and effectively handle interpersonal relationships with others.
Must be able to receive and apply feedback to improve performance.
Must be able to prioritize, plan work activities, and use time efficiently.
Must be able to maintain regular, predictable attendance.
Must be able manage shifting priorities and to consistently meet commitments and deadlines.
Must be able to work effectively with multiple interruptions and distractions.
Must be able to commit to necessary hours of work to reach goals.

Education / Training:

BSEE/BSCE

Quick Apply

Refine Your Search

fiber optic jobs in raleigh nc

Sr. Hardware Engineer-North Carolina

Cabling Technician

Fiber Installation Technician

Sr. Principal Electromechanical Engineer

Project Coordinator - Fiber Optic Cabling and Splicing

OSP Fiber Technician I

Field Technician I - Raleigh, NC

Data Center / Lab Technician – 3-Month Contract

Telecommunications Cabling Technician

Fiber Splicing Technician

Travel Fiber Splicer

IT Field Engineer

Data Cable Technician

Designer I

Service Operations Specialist

Fiber Technicians

Fiber Optic Cable Foreman

Construction Technician Raleigh NC

Cable Technician/Installer - Top rates in the area!

Engineer I

I want to receive the latest job alert for fiber optic in raleigh nc

Related Searches

Explore jobs in more locations

Job Seeker Tools

Employer Tools

Browse

Stay Connected