SEACORP is seeking a well-qualified Engineering Technician I - VI.
Primary Duties and Responsibilities:
Job Summary: SEACORP is seeking Engineering Technicians who will apply electrical theory and related knowledge to test and modify developmental or operational electrical machinery and electrical control equipment and circuitry in industrial or commercial plants and laboratories. Usually work under direction of engineering staff. Technicians have similar general technical duties as they relate to their specific technical discipline (electrical, electronics, or mechanical).
Job Responsibilities Include:
Engineering Technician I
-
Proficient at assembling or installing equipment or parts requiring simple wiring, soldering, or connecting and performing simple or routine tasks or tests such as tensile or hardness tests
-
Operates and adjusts simple test equipment; records test data.
-
Gathers and maintains specified records of engineering data such as tests, drawings, etc.
-
Performs computations by substituting numbers in specified formulas; plots the data and draws the simple curves and graphs for reporting analysis.
Engineering Technician II
-
Must be able to perform at level one duties or a combination of such typical technical duties within their respective
classification -
Follows specific instructions, assembles or constructs simple or standard equipment or parts; may service or repair simple
instruments or equipment, conducting a variety of tests using established methods. -
Prepares test specimens, adjusts and operates equipment.
-
Records test data, pointing out deviations resulting from equipment malfunction or observational errors or extracting
engineering data from various prescribed but non-standardized sources. -
Process the data following well-defined methods including elementary algebra and geometry.
-
Present the data in prescribed format for reporting analysis.
Engineering Technician III
-
Must be able to perform at level one and two duties or a combination of such typical technical duties within their respective classification.
-
Receive initial instruction, equipment requirements, and advice from supervisor or engineer as needed.
-
Performs recurring work independently; work is reviewed for technical adequacy or conformity with instructions.
-
Constructing components, sub-units, or simple models or adapts standard equipment.
-
May troubleshoot and correct malfunctions.
-
Follows specific layout and scientific diagrams to construct and package simple devices and sub-units of equipment.
-
Conduct various tests or experiments which may require minor modifications in test setups or procedures as well as
subjective judgments in measurement. -
Select, sets up, and operates standard test equipment and records test data.
-
Extracting and compiling a variety of engineering data from field notes, manuals, lab reports, etc.
-
Processes data, identifying errors or inconsistencies; selects methods of data presentation. Also assists in design modification by compiling data related to design, specifications, and materials which are pertinent to
specific items of equipment or component parts. -
Develop any analytical information concerning any previous operational failures and modifications already completed.
Uses judgment and initiative to recognize inconsistencies or gaps in data and seeks sources to clarify information.
Engineering Technician IV
-
Handles assignments, which are typically parts of broader assignments, which are screened to eliminate unusual design
problems but also plan such assignments. -
Receives technical advice from supervisor or engineer; work is reviewed for technical adequacy (or conformity with instructions).
-
May be assisted by lower-level technicians and have frequent contact with professionals and others within the company.
-
Develops or reviews designs by extracting and analyzing a variety of engineering data.
-
Applies conventional engineering practices to develop, prepare, or recommend schematics, designs, specifications, electrical drawings and diagrams; hardware fittings or test equipment involving a variety of mechanisms; conventional piping systems; and building site layouts.
-
Conducts tests or experiments requiring selection and adaptation or modification of a wide variety of critical test equipment and test procedures; sets up and operates equipment; records data, measures and records problems of significant complexity that sometimes require resolution at a higher level; and analyzes data and prepares test reports.
-
Applies methods outlined by others to limited segments of research and development projects; constructs experimental or prototype models to meet engineering requirements; conducts tests or experiments and redesigns as necessary; and records and evaluates data and reports the findings.
Engineering Technician V
-
Selects and adapts plans, techniques, designs, or layouts.
-
Contacts personnel in related activities to resolve problems and coordinate the work; reviews, analyzes, and integrates the technical work of others.
-
Supervisory or professional engineer outlines objectives, requirements and design approaches; completed work is reviewed for technical adequacy and satisfaction of requirements.
-
May train and be assisted by lower-level technicians.
-
Designs, develops, and constructs major units, devices, or equipment; conducts tests or experiments; analyzes results and
redesigns or modifies equipment to improve performance, and reports results. -
From general guidelines and specifications (e.g., size or weight requirements), develops designs for equipment without
critical performance requirements which are difficult to satisfy such as engine parts, research instruments, or special purpose circuitry. -
Analyzes technical data to determine applicability to design problems; selects from several possible design layouts; calculates design data; and prepares layouts, detailed specifications, parts lists, estimates, procedures, etc.
-
May check and analyze drawings or equipment to determine adequacy of drawings and design.
-
Plan or assist in planning tests to evaluate equipment performance.
-
Determine test requirements, equipment modification, and test procedures; conducts tests using all types of instruments,
analyzes and evaluates tests results and prepares reports on findings and recommendations.
Engineering Technician VI
-
Serves as an expert in a narrow aspect of a particular field of engineering, (e.g., environmental factors that affects electronic engineering)
-
Complexity of assignments typically requires considerable creativity and judgment to devise approaches to accomplish work, resolve design and operational problems, and make decisions in situations where standard engineering methods, procedures, and techniques may not be applicable.
-
Supervisor or professional engineer provides advice on unusual or controversial problems or policy matters; completed work is reviewed for compliance with overall project objectives.
-
May supervise or train and be assisted by lower-level technicians.
-
Prepares designs and specifications for various complex equipment or systems (e.g., a heating system in an office building, or new electronic components such as solid-state devices for instrumentation equipment).
-
Plans approach to solve design problems; conceives and recommends new design techniques; resolves design problems with contract personnel and assures compatibility of design with other parts of the system.
-
Designs and coordinates test set ups and experiments to prove or disprove the feasibility of preliminary design; uses untried and untested measurement techniques; and improves the performance of the equipment.
-
May advise equipment users or redesign to solve unique operational deficiencies.
-
Plans approach and conducts various experiments to develop equipment or systems characterized by (a) difficult performance requirements because of conflicting attributes such as versatility, size, and ease of operation; or (b) unusual combination of techniques or components.
-
Arranges for fabrication of pilot models and determines test procedures and design of special test equipment.
Qualifications:
Education:
Engineering Technician I – II High School Diploma/GED/ Vocational School Diploma
Engineering Technician III- IV Technical School Diploma
Engineering Technician V – Technical School Diploma
Engineering Technician VI – Associates Degree in Electrical/Electronic Engineering Technology, Physics of Mathematics
Experience:
Engineering Technician I - No requirement for prior professional service.
Engineering Technician II - 1 years of professional service.
Engineering Technician III - 3 years of professional service.
Engineering Technician IV - 4 years of professional service.
Engineering Technician V - 5 years of professional service.
Engineering Technician VI - 5 years of professional service.
As a requirement of employment, all SEACORP employees must hold U.S. Citizenship.
Location: Middletown, RI
Travel: Quarterly (approximately 4 times a year)
Clearance: Secret
Work Environment & Physical Demands: This position operates in standard Office, Assembly Laboratory, and Aboard Vessel/Shipyard environments. Standard offices and laboratories: Sitting, standing, extended periods of time using a mouse and keyboard and viewing computer screens. Movement between points within the same office or between buildings. Work is performed in generally consistent environmental conditions with some seasonality for temperature differences and lighting. In shipyards and aboard vessels: Significant use of hands to operate equipment and tools. Significant lifting of <40 lbs.; occasional lifting >40 lbs. Sitting, stooping, bending, twisting, reaching, lying prone, and squatting on a daily basis. Work is performed in highly variable work conditions to include seasonable variations in weather and temperature. High probability of working in confined spaces where movement is restricted. Dust, noise and constant activity associated with the movements of materials and people, and the fabrication of steel, including welding and the use of overhead cranes/hoists. Personal Protective Equipment: safety shoes and hard hat required; hearing protection and safety glasses recommended.
Successful candidates will enjoy competitive wages and a very rich benefit program, including:
- Medical Benefits: Choice of two medical insurance programs through Blue Cross & Blue Shield.
- Dental Benefits: A best in class Dental Insurance Plan through Delta Dental.
- Vision Benefits: An excellent Vision Benefit providing discounts and allowances for prescription glasses and contact lenses.
- Retirement Benefits: A qualified 401(k) Retirement Savings Account with a generous employer matching contribution up to 8% of your eligible compensation.
- Life Insurance Benefits: Employer paid Life and Accidental Death & Dismemberment Insurance equal to your annual salary. Supplemental coverage is available for you and qualified family members as well as Supplemental Short-Term and Long-Term Disability Insurance.
- Additional Benefits: Ten (10) Paid Holidays per year (including 2 floating Holidays), a generous Paid Time Off (PTO) program; Tuition Reimbursement, and Referral Bonuses.
Undersea, on the surface, or in the air, SEACORP leverages its software and engineering expertise to deliver cutting edge warfare systems.
SEACORP is a proud Equal Opportunity Employer and complies with all applicable federal, state and local fair employment practices laws. SEACORP strictly prohibits and does not tolerate discrimination against employees, applicants or any other covered persons because of race, color, religion, creed, national origin or ancestry, ethnicity, sex, gender (including gender nonconformity and status as a transgender or transsexual individual), age, sexual orientation, physical or mental disability, citizenship, past, current or prospective service in the uniformed services, genetic information, or any other characteristic protected under applicable federal, state or local law.
