Top 27 Structural welder Jobs in Santee Ca

B Class Structural Welder - SDCA
Austal USA LLC —National City, CA
- $36.65 an hour
- Overtime
- Background check
- 18 years or older
- Pass drug screening
Quick Apply
12d
Structural Welder
Venture Group I Inc —San Diego, CA
- $42 an hour
- Full-time
- Construction site
- English
- Mid-level
Quick Apply
Welder - Structural
Mike's Metal Works INC —Jamul, CA
- $25 - $35 an hour
- 8 hour shift
- 5 years
- Forklift
- High school diploma or GED
- Paid holidays
- Health insurance
Quick Apply
10d
Welder Helper / PCIW STEEL CORP
PCIW STEEL CORP —Spring Valley, CA
- $20 - $22 an hour
- 8 hour shift
- Forklift
- High school diploma or GED
- Ability to lift 50 pounds
- 401(k)
- 401(k) matching
Quick Apply
Certified Welder/Metal Fabricator
Basile Studio —San Diego, CA
- $25 - $35 an hour
- Full-time
- Mid-level
- Ability to lift 50 pounds
- Driver's License
- Paid holidays
- Health insurance
Quick Apply
Aerospace Structural Welder
Kay & Associates, Inc. —Coronado, CA
- $44.12 an hour
- Contract
- Background check
- Pass drug screening
- 3 years
- Paid holidays
- Health insurance
Welder
Delphinus Engineering —Chula Vista, CA
- $21.83 - $38.00 an hour
- Basic math
- High school diploma or GED
- Ability to lift 50 pounds
Quick Apply
Certified Welder / Fabricator (Non-Exempt)
Skyhook Stairs & Rails —San Diego, CA
- $26 - $30 an hour
- Overtime
- Construction site
- Mid-level
- 3 years
- Paid holidays
- Health insurance
Quick Apply
Welder (Repair)
General Dynamics NASSCO —San Diego, CA
- $33.76 - $37.11 an hour
- Construction site
- English
- Mid-level
- Paid holidays
- Disability insurance
Welder (New Construction)
General Dynamics NASSCO —San Diego, CA
- $33.76 - $37.11 an hour
- Construction site
- English
- Mid-level
- Paid holidays
- Disability insurance
Fabricator Welder
Advastar, Inc —San Diego, CA
- $29 - $40 an hour
- 8 hour shift
- Background check
- Clean driving record
- 5 years
- Health insurance
- Dental insurance
Quick Apply
Combo Welder/Fitter
Pier solutions —National City, CA
- $28 - $35 an hour
- Overtime
- Construction site
- Mid-level
- Quality control
- Employee assistance program
- Flexible schedule
Quick Apply
6d
Traveling Iron Worker
Tri State General Contractors —Escondido, CA
- $32 - $45 an hour
- Overnight shift
- Construction site
- Mid-level
- 3 years
- Health insurance
- Dental insurance
Quick Apply
11d
Production Trades Assistant - SDCA
Austal USA LLC —National City, CA
- $22.00 - $29.68 an hour
- Full-time
- Background check
- 18 years or older
- Construction site
Quick Apply
4d
Journeyman Welder
TriMas Company LLC —El Cajon, CA
- $34 - $40 an hour
- Full-time
- 5 years
- Assembly
- Senior level
- Disability insurance
- Health insurance
1d
Journeyman Welder
TriMas Corporation —El Cajon, CA
- $34 - $40 an hour
- Full-time
- 5 years
- Assembly
- Senior level
- Disability insurance
- Health insurance
Quick Apply
2d
Pipe Welder NASSCO
Venture Group I Inc —San Diego, CA
- $50 an hour
- Full-time
- 5 years
- Senior level
- Commercial
Quick Apply
Ship/Submarine Welder 5 - San Diego, CA
M.C. Dean, Inc —San Diego, CA
- $36 - $54 an hour
- Overtime
- Clean driving record
- Inventory management
- 5 years
- Paid parental leave
- Disability insurance
Pipe Welder
Miller Marine —San Diego, CA
- Background check
- Basic math
- Pass drug screening
- Flexible schedule
Ship / Submarine Welder 3 - San Diego, CA
M.C. Dean, Inc —San Diego, CA
- $28.80 - $43.20 an hour
- Overtime
- Clean driving record
- English
- Mid-level
- Paid parental leave
- Disability insurance

I want to receive the latest job alert for structural welder in santee ca

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

B Class Structural Welder - SDCA

Austal USA LLC -
National City, CA

Quick Apply

Job Details

Full-time
$36.65 an hour
12 days ago

Qualifications

Aluminum
Personal protective equipment (PPE) adherence
Cutting torches
Grinding tools
Lifts and hoists
Safety equipment
Gas metal arc welding
Flux-cored welding
Respirator

Full Job Description

REPORTS TO: Fabrication Supervisor

SUPERVISES: None

AUTHORITIES / RESPONSIBILITIES:

Understand directions and follow instructions.
Accountable for completion of daily work assignments including the completion and signatures for work completion and quality.
Maintains cleanliness and organization on assigned job sites.
Performs grinding and joint preparation that meet the criteria for NDE and all visual inspection processes.
Monitors working environment for compliance with quality, safety, environmental and health regulations.
Willing to work with and train lower-skilled workers.
May be assigned to work any shift.
May be assigned tasks including outside the craft as required.
Must comply with the Company’s “Equal Opportunity and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be professional and free of bias, prejudice, and harassment.

QUALIFICATIONS / KNOWLEDGE / EXPERIENCE:

Minimum 6 months experience as a Trades Assistant at Austal or 1 year related experience in similar industry required or graduate of a relevant / associated training course
- Completion of an Austal USA approved additional or accelerated Structural Welding training course may also count towards additional required experience
Must pass the GMAW Aluminum ‘B’ Class and/or an FCAW Steel ‘B’ Weld Certification and approved B Class pre-employment mock weld test
Performs the approved WPQT’s under limited supervision.
Must be able to perform grinding along with arc gouging and back gouging of steel welds through mechanical, flame, and ARC gouging process, joint preparation for NDE and all other visual inspection processes.
Must be able to demonstrate the safe and effective use of craft related tools and equipment, including but not limited to: milling discs, cutting torches, arc gougers, plate magnets, general fitting aids, sanders, grinders, burr motors, band saws, skill saws, saws all, come along and chain falls etc.
The ability to understand directions and follow instructions.
Must demonstrate an acceptable proficiency and competency to Austal Supervision for a B Class Welder position.
Ability to read and comprehend simple instructions, short correspondence, and memos.
Ability to write simple correspondence.
Ability to add, subtract, multiply, divide, and measure using the metric system.
Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form.
Ability to deal with problems that may arise in certain situations.
Two years of maritime experience
Ability to work any shift or overtime as required by management, schedule must be flexible.

TOOLS: As directed by supervisor

DIRECTION EXERCISED: None

DISCRETION EXERCISED: None

LIAISES WITH: Production Department Supervisors, Foreman and Managers, Health, Safety and Environmental

ADDITIONAL GUIDELINES:

Candidates must meet the following employment eligibility guidelines to be considered for employment with Austal USA:

18 years of age or older at time of application
Able to provide proof of US Person Status
No felony convictions of Theft/Deception or Violent crimes within seven years from disposition date
No felony convictions of Drug crimes within three years from disposition date
Willing to submit to a drug screen
Willing to submit to a background check

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be able to tour all vessels and work sites.

While performing the duties of this job, the employee is regularly required to stand, walk, use hands to manipulate, handle, or feel, reach with hands and arms, climb and balance, stoop, kneel, crouch, or crawl, and talk or hear. The employee is occasionally required to sit.

Specific physical requirements include the following:

Must have the ability to bend, squat, stoop, crawl, and kneel.
Perform prolonged standing. Ability to turn head from side to side and about the vertical axis.
Ability to turn body at the waist from side to side and about the vertical axis.
Lift/push/pull 50lbs to 75lbs on an occasional basis.
Lift/push/pull up to 20lbs on a frequent basis.
Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps).
Ability to work at heights above 12’ while working from ladders, scaffolding and/or man lifts.
Able to work at a variety of levels (ex. waist, eye, overhead).
Demonstrate the ability to safely and appropriately use required tools and equipment.
Demonstrate good balance while working on uneven surfaces and maneuvering obstacles.
Possess sufficient handgrip and coordination to carry and operate tools and equipment.
Ability to utilize personal protective equipment (hard hat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards.
Ability to withstand cold and hot temperatures.
Ability to enter 18” x 36” openings and work in confined spaces for prolonged periods of time.
Able to respond to verbal and audible sounds/commands.
Able to utilize adequate visual skills.
Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down.
Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters whole performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly exposed to humid conditions, moving mechanical parts, high precarious places, outside weather conditions, and extreme heat. The employee is occasionally exposed to fumes and/or airborne particles, toxic or caustic chemicals, and heat and cold. The noise level in the work environment is usually very loud.

SAFETY

Must comply with company, federal, state, and local safety and environmental rules and regulations while performing daily job tasks.

COMPENSATION

Pay rate: $36.65 per hour

Equal Employment Commitment

Any qualified individual with a disability who is having difficulty in completing an application because of incompatible technology or other disability-related application issues may contact us at the following phone number for assistance: 251-445-1932.

Austal’s commitment to equal employment opportunity applies at all levels of employment, in all job titles, including the executive level, and to all employment actions, including but not limited to decisions concerning recruitment, hiring, training, and promotion.

Quick Apply

Refine Your Search

structural welder jobs in santee ca

B Class Structural Welder - SDCA

Structural Welder

Welder - Structural

Welder Helper / PCIW STEEL CORP

Certified Welder/Metal Fabricator

Aerospace Structural Welder

Welder

Certified Welder / Fabricator (Non-Exempt)

Welder (Repair)

Welder (New Construction)

Fabricator Welder

Combo Welder/Fitter

Traveling Iron Worker

Production Trades Assistant - SDCA

Journeyman Welder

Journeyman Welder

Pipe Welder NASSCO

Ship/Submarine Welder 5 - San Diego, CA

Pipe Welder

Ship / Submarine Welder 3 - San Diego, CA

I want to receive the latest job alert for structural welder in santee ca

Explore jobs in more locations

Job Seeker Tools

Employer Tools

Browse

Stay Connected