Top 159 Assembler Jobs in Selma Tx

Calibration & Final Assembly Production Associate
TINKER & RASOR —New Braunfels, TX
- $16 - $20 an hour
- Overtime
- No experience needed
- High school diploma or GED
- Continuous improvement
- Health insurance
- Dental insurance
Quick Apply
3d
Electrical Assembler
Munters —Selma, TX
- $19.93 an hour
- Full-time
- Background check
- Pass drug screening
- Entry level
- Dental insurance
- Tuition reimbursement
3d
Acrylic Bonding Assembler
Hawkins Personnel Group —San Antonio, TX
- From $15 an hour
- 8 hour shift
- Background check
- Power tools
- In-person
- Health insurance
- Dental insurance
Quick Apply
2d
Assembler I
UFP Industries, Inc. —Schertz, TX
- Full-time
- 18 years or older
- Basic math
- High school diploma or GED
Electrical Assembler
Munters Corporation (MUS) —Selma, TX
- $19.93 an hour
- Full-time
- Background check
- Pass drug screening
- Entry level
- Dental insurance
- Tuition reimbursement
Quick Apply
Associate Production/Assembly Worker (H)
Munters Corporation (MUS) —Selma, TX
- $19.93 an hour
- Full-time
- Background check
- Pass drug screening
- Entry level
- Dental insurance
- Tuition reimbursement
Quick Apply
7d
Assembly Team Member - San Antonio, Texas
JCB North America —San Antonio, TX
- Full-time
- Office
- Ability to lift 50 pounds
- Power tools
- Paid time off
- Opportunities for advancement
Quick Apply
Warehouse Associate Part-Time
Mondelēz International —Schertz, TX
- $24 an hour
- Part-time
- Forklift
- Warehouse
- Entry level
- Paid holidays
Assembler Level 1
Viant Medical —San Antonio, TX
- $15 an hour
- Full-time
- Laboratory
- Basic math
- English
- Paid holidays
- Health insurance
Quick Apply
Production Assembler I
FBD PARTNERSHIP LP —San Antonio, TX
- Background check
- Computer literacy
- Pass drug screening
Assembler I - 2nd Shift
Viant Medical —San Antonio, TX
- Full-time
- Basic math
- English
- Ability to sit for extended periods
- Paid holidays
- Health insurance
Quick Apply
Assembly Technician Apprentice
MESA POWER SOLUTIONS LLC —San Antonio, TX
- $18 - $20 an hour
- Full-time
- Background check
- Military
- Pass drug screening
- Paid holidays
- Disability insurance
Quick Apply
Production Worker 1 - Electronics - 1st shift
Lancer Corporation —San Antonio, TX
- Basic math
- English
- High school diploma or GED
Quick Apply
Assembler 2nd Shift
Xerxes —Seguin, TX
- $21.44 an hour
- Basic math
- English
- Forklift
- Free parking
- Wellness program
Team Member I - General Assembly
International Motors, LLC —San Antonio, TX
- $20.50 an hour
- Overtime
- English
- Warehouse
- Power tools
- Paid holidays
- Disability insurance
1d
Warehouse Associate
Wilson Company —Schertz, TX
- $15 - $19 an hour
- Full-time
- Computer literacy
- Basic math
- High school diploma or GED
Quick Apply
3d
Windows/Doors Manufacture Hiring Production Team Members
Renaissance GSB —San Antonio, TX
- $20 - $22 an hour
- Full-time
- Basic math
- English
- High school diploma or GED
- Health insurance
- Paid time off
Quick Apply
8d
Production Technician I, C9 - SBA/AHA – All Shifts
Caterpillar —Seguin, TX
- From $18.50 an hour
- Overtime
- Microsoft Word
- Schematics
- Pass drug screening
- Health savings account
- Paid holidays
3d
Assembler (2nd Shift)
Johnson Controls —San Antonio, TX
- $16 - $18 an hour
- Overtime
- High school diploma or GED
- Ability to lift 50 pounds
- Computer skills
- Paid holidays
- Health insurance
5d
Assembly Operation Tech - PM
Visionworks —Schertz, TX
- $17.00 - $19.62 an hour
- Weekends as needed
- Basic math
- English
- High school diploma or GED
Quick Apply

I want to receive the latest job alert for assembler in selma tx

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

Explore jobs in more locations

assembler jobs near selma tx

Calibration & Final Assembly Production Associate

TINKER & RASOR
New Braunfels, TX

Quick Apply

Job Details

Full-time
$16 - $20 an hour
3 days ago

Benefits

Health insurance
Dental insurance
Paid time off
Vision insurance

Qualifications

Computer operation
High school diploma or GED
Manufacturing standard operating procedures
Quality data entry

Full Job Description

Calibration & Final Assembly Production Associate

Tinker & Rasor is looking for a motivated Calibration & Final Assembly Production Associate to join our production team. This position is responsible for performing final assembly, equipment calibration, production testing, and simple repairs on electronic instruments used in cathodic protection and corrosion control applications.

This is a hands-on production position. Advanced electronics troubleshooting experience is not required. The right candidate should be dependable, detail-oriented, willing to learn, and able to follow written procedures carefully. Tinker & Rasor will provide training on how to use multi-meters, oscilloscopes, calibration equipment, and other tools needed for the job.

This position will work under the direction of the Electronic Repair Technician / Department Team Lead.

Primary Responsibilities

· Perform final assembly of electronic instruments and related products

· Calibrate equipment by following written procedures and work instructions

· Test finished products to verify proper operation before shipment

· Perform basic repairs, such as fixing broken wires, replacing damaged connectors, switches, leads, hardware, and other common parts

· Test production sub-assemblies, including ribbon cables, switches, wiring, and basic electronic assemblies

· Use basic test equipment such as multi-meters, power supplies, oscilloscopes, and calibration equipment after training

· Follow work tickets, assembly instructions, calibration procedures, and quality checklists

· Accurately record calibration results, test data, serial numbers, and production notes

· Report product issues, missing parts, BOM problems, unclear instructions, or quality concerns to the Team Lead

· Keep work area clean, organized, and safe

· Assist with continuous improvement of assembly, testing, and calibration processes

· Assist with production assembly, final testing, or other operational tasks when needed.

· Perform other work-related duties as assigned.

Scope of the Position

This position is focused on calibration, final assembly, production testing, and basic repairs.

This position is not expected to perform advanced electronic troubleshooting, circuit board diagnosis, or component-level repair. Advanced troubleshooting, quality control review, and calibration documentation will be handled by the Electronic Repair Technician / Department Team Lead.

Qualifications and Requirements

· High school diploma or equivalent required

· Strong attention to detail

· Ability to follow written procedures and verbal instructions

· Good hand-eye coordination and mechanical ability

· Willingness to learn electronic test equipment and calibration procedures

· Dependable, organized, and self-motivated

· Able to work independently after training

· Basic computer skills for entering test results, serial numbers, and production notes

· Ability to communicate clearly when something does not look correct

Preferred but Not Required

· Soldering experience

· Experience using a multi-meter

· Experience with hand tools or small mechanical assembly

· Previous production, assembly, repair, testing, or quality control experience

· Basic understanding of electronics or electrical circuits

Physical Requirements

· Must be able to sit, stand, bend, and reach for sustained periods.

· Must have the manual dexterity necessary to handle small components, solder connections, operate tools, and use a computer.

· Must have sufficient visual acuity to inspect electrical connections, read test equipment, and view a computer screen.

· Must be able to communicate and exchange information through spoken and written communication.

· Must be able to lift and move materials weighing up to 40 pounds.

Work Environment & Schedule

This position is based in a clean, air-conditioned production and final assembly environment. The employee will work with electronic instruments, hand tools, test equipment, wiring, small parts, and calibration equipment.

The regular work schedule is Monday through Friday, 7:30 AM to 4:00 PM. Overtime is rare and is usually not required. This position offers a consistent daytime schedule in a stable manufacturing environment.

Ideal Candidate

The ideal candidate is reliable, motivated, and willing to learn. We are looking for someone who takes pride in their work, follows instructions carefully, pays attention to details, and communicates when something does not look right.

This is a great opportunity for someone interested in learning electronics, calibration, and production testing while working in a hands-on manufacturing environment.

Pay: $16.00 - $20.00 per hour

Benefits:

Dental insurance
Health insurance
Paid time off
Vision insurance

Ability to Commute:

New Braunfels, TX 78130 (Required)

Work Location: In person

Quick Apply

Refine Your Search

assembler jobs in selma tx

Calibration & Final Assembly Production Associate

Electrical Assembler

Acrylic Bonding Assembler

Assembler I

Electrical Assembler

Associate Production/Assembly Worker (H)

Assembly Team Member - San Antonio, Texas

Warehouse Associate Part-Time

Assembler Level 1

Production Assembler I

Assembler I - 2nd Shift

Assembly Technician Apprentice

Production Worker 1 - Electronics - 1st shift

Assembler 2nd Shift

Team Member I - General Assembly

Warehouse Associate

Windows/Doors Manufacture Hiring Production Team Members

Production Technician I, C9 - SBA/AHA – All Shifts

Assembler (2nd Shift)

Assembly Operation Tech - PM

I want to receive the latest job alert for assembler in selma tx

Related Searches

Explore jobs in more locations

Job Seeker Tools

Employer Tools

Browse

Stay Connected