Top 150 Quality control Jobs in Stamford Ct

Technician Product Quality
FuelCell Energy —Danbury, CT
- Microsoft Excel
- Microsoft Outlook
- Up to 50% travel
Inspector, Senior, In-process
TTM Technologies —Farmingdale, NY
- $55,456 - $87,657 a year
- Full-time
- 8 years
- High school diploma or GED
- Data entry
- Health savings account
- Paid holidays
Quality Manager
Alpha Metalcraft Group —Bethel, CT
- $100,000 - $115,000 a year
- Full-time
- Background check
- Engineering
- ERP systems
- Profit sharing
- Paid holidays
Quick Apply
Quality Control Technician
OnScent —Norwood, NJ
- $60,000 - $68,000 a year
- Mid-level
- Bachelor's degree
- 1 year
- Paid holidays
- Disability insurance
13d
Brand Rep - Audits, Merchandising and Quality Control - $24/hr
ThirdChannel —Bridgeport, CT
- From $24 an hour
- Urgently hiring
- Merchandising
- Reliable transportation
- Entry level
Quick Apply
Department Coordinator (Quality Control Experience)
Westchester Medical Center —Valhalla, NY
- $65,907 - $82,850 a year
- Full-time
- Bachelor of Science
- Mid-level
- Administrative experience
- Paid holidays
- Health insurance
Quality Control Administrator (PRIME Division)
S&S Activewear LLC —Bridgeport, CT
- $26.15 - $30.77 an hour
- Full-time
- Background check
- Mid-level
- High school diploma or GED
Quick Apply
Quality Control Technician - Nights
The Middlesex Corporation —Norwalk, CT
- Part-time
- Civil engineering
- Construction site
- Mid-level
- Health insurance
- Dental insurance
Quality Control Inspector II
CooperSurgical —Trumbull, CT
- Full-time
- Microsoft Outlook
- Mid-level
- Mentoring
Quality Document Technician
Straton Industries —Stratford, CT
- $28 - $35 an hour
- Full-time
- Microsoft Outlook
- Basic math
- Administrative experience
Quick Apply
Receiving Quality Inspector III
BAE Systems Inc. —Greenlawn, NY
- $62,530 - $100,048 a year
- Full-time
- Mid-level
- High school diploma or GED
- 1 year
- Health savings account
- Paid holidays
Quality Control Manager
The Middlesex Corporation —Norwalk, CT
- Part-time
- Bachelor's degree
- Experience equivalent to degree accepted
- Senior level
- Health insurance
- Dental insurance
Associate I, Quality Control (Tues. - Sat. 12:30pm to 9:00pm)
MannKind Corporation —Danbury, CT
- $20.80 - $31.20 an hour
- High school diploma or GED
- Communication skills
- Entry level
Quick Apply
Quality Engineer (REQ743)
Spartech —Stamford, CT
- Full-time
- Engineering
- Microsoft Office
- Analysis skills
- Paid holidays
- Disability insurance
Quick Apply
QC TECHNICIAN
OnScent —Norwood, NJ
- $60,000 - $68,000 a year
- Weekends as needed
- Ability to walk for extended periods
- Mid-level
- Communication skills
Inspector III
BAE Systems Inc. —Greenlawn, NY
- $62,530 - $100,048 a year
- Overtime
- Computer literacy
- Mid-level
- High school diploma or GED
- Health savings account
- Paid holidays
Chemist II; Quality Control
CONTRACT PHARMACAL CORP —Hauppauge, NY
- $75,000 - $89,999 a year
- Full-time
- Microsoft Word
- Mid-level
- Ability to climb stairs
Quality Inspector (Temp-to-perm)
ENNOVI —Northvale, NJ
- $21 - $30 an hour
- Temporary
- English
- Mid-level
- High school diploma or GED
Quick Apply
Natural Gas Distribution QA/QC Specialist
Burns Construction —Norwalk, CT
- Full-time
- Construction site
- 5 years
- Engineering
- Paid holidays
- Health insurance
Quick Apply
14d
Customer Complaint Specialist- 1st Shift
Piping Rock —Farmingdale, NY
- $26 - $30 an hour
- Full-time
- Pass drug screening
- Mid-level
- Ability to lift 50 pounds
- Health insurance
- Dental insurance
Quick Apply

I want to receive the latest job alert for quality control in stamford ct

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

Explore jobs in more locations

quality control jobs near stamford ct

Technician Product Quality

FuelCell Energy -
Danbury, CT

Apply Now

Job Details

Qualifications

Mechanical blueprint interpretation
Computer operation
Communication with suppliers
Microsoft Excel
Microsoft Outlook
Writing skills
Electrical schematic reading and interpretation
Equipment troubleshooting
English
Piping and instrumentation diagrams (P&IDs)
Shop math
High school diploma or GED
Mechanical drawings
Documentation tools
Troubleshooting electrical systems
Issue tracking
Vendor communication
Document review
Technical troubleshooting support
Quality control communication
Personal Protective Equipment (PPE)
Project stakeholder communication
Mechanical troubleshooting

Full Job Description

Location: Danbury, CT, US, 06810

Date: Aug 19, 2026

Overview:

We are currently seeking a Quality Technician to join our Product Quality team who has a creative, innovative approach to his or her work and will never shy away from offering truthful observations and recommendations. We’re looking for a highly organized, methodical professional with exacting attention to detail and the experience necessary to take our products to the next level in terms of safety, quality, and accuracy. A proven track record of experience is essential.

Responsibilities:

Based out of our Danbury facility or remote, the Quality Technician performs functions associated with the checkout, inspection and testing of fuel cell power plant mechanical and electrical Balance of Plant (BOP) skid assemblies, main components, and individual equipment at supplier/fabricator facilities. Additionally, complete inspections and verifications of mechanical and electrical work at FCE customer power plant installation sites. Including, but not limited to wiring checks, instrumentation (I/O) testing, piping inspections, general build inspections, and the proper documentation of all testing and inspections. Travel to various fabricators and suppliers domestically and occasionally internationally. Travel 50% plus.

Perform in-process and final inspection of vendor supplied skid assemblies and equipment at vendor facilities per applicable drawings and specifications
Complete dimensional verifications of key skid structural, process connection, and equipment characteristics using appropriate measurement tools
Use process meter and/or multimeter to complete device loop checks of process skid I/O
Conduct hand-over-hand skid system walkdowns
Use pressure test equipment paired with meter to complete testing of pressure sensing devices
Properly document results of all inspections and testing
Use of basic tools to access equipment, panels, and devices and in troubleshooting efforts
Perform in-process and final inspection of power plant site installed mechanical and electrical work completed by installation contractors
Review test and inspection documentation generated by vendors and contractors
Initiate and maintain running punch list for issues noted during above mentioned inspections
Communicate inspection results, test results, and nonconformance issues via email and/or reports to applicable stakeholders
Provide feedback to Engineering on drawing escapes and possible improvements noted
Participate in root cause investigations and corrective actions
Other tasks as assigned.

Qualifications:

Education: High School Diploma/GED required. Associate’s Degree in Engineering Technology or an applicable discipline is a plus.

Experience: Minimum of 2 years related experience, preferably in skid or packaged equipment fabrication inspections and testing.

Requirements:

Self-motivated with a demonstrated ability to operate responsibly, cooperatively, and flexibly in a team environment with minimal supervision
Able to read and interpret P&IDs, electrical schematics, piping isometrics, structural fabrication drawings, general arrangement drawings, and specifications - knowledge of GD&T is a plus
Math aptitude including the ability to perform computations with all units of measure (international and U.S.
Able to communicate effectively in English (writing and verbally)
Excellent interpersonal skills to act as the quality liaison between FCE engineering, FCE procurement, suppliers/fabricators, FCE project management, and site installation contractors to clearly communicate requirements and effectively resolve non-conformance issues
Capable of clearly documenting deficiencies in a punch list and tracking those items through to acceptable completion
Good troubleshooting ability/experience to both understand and support vendor efforts to resolve issues discovered in testing
Demonstrable experience using precision quality measurement tools
Experience working within an ISO 9001 registered quality management system preferred
Experience with Microsoft Office Suite including Word, Excel, PowerPoint, and Outlook
Experience with welding codes, WPS, PQR, and weld inspection techniques (ASME Section IX, B31.1/.3, AWS D1.1, D1.3, and D1.6) a plus
Familiarity with NEC (NFPA 70) and NFPA 79 electrical standards is a plus
Knowledge of skidded equipment electrical installations and control panel construction a plus
Experience with ERP system based quality software system preferred (knowledge of Microsoft D365/ERP Solutions quality software, a plus)

Ability to work on multiple projects simultaneously
Basic knowledge/experience on interfacing with PLCs and/or test HMI programs is a plus but not required
Creativity to identify solutions and improvement opportunities in a dynamic environment
ASQ CQI Certification is a plus

Physical Requirements/Working Conditions:

Domestic and International Travel required: up to 70%
Ability to obtain/maintain a valid passport and travel without restriction internationally is required
Capable of walking (standing) on concrete flooring in a large manufacturing plant, or uneven installation/construction site for extended periods of time to perform various tasks throughout the day
Must have full mobility to climb ladders and maneuver through tight areas for inspection of large equipment/skid units
Must be able to lift or move items up to 25 pounds with or without assistance
Must be able to work with both hands and arms in full range of motion, stand, walk, bend, kneel, stoop, crouch, crawl and climb throughout the day
Computer work for extended periods of time is also required
Specific vision abilities required by this job include close vision, distance vision, ability to distinguish between colors, peripheral vision, depth perception and ability to adjust focus
Must be able to work physically in the manufacturing plant or construction site, wearing required personal protective equipment (PPE) such as safety gloves, hard hats, safety shoes, etc., as designated
Ability to hear or be aware of audible danger alerts

Nearest Major Market: Bridgeport
Nearest Secondary Market: Danbury

Apply Now

Refine Your Search

quality control jobs in stamford ct

Technician Product Quality

Inspector, Senior, In-process

Quality Manager

Quality Control Technician

Brand Rep - Audits, Merchandising and Quality Control - $24/hr

Department Coordinator (Quality Control Experience)

Quality Control Administrator (PRIME Division)

Quality Control Technician - Nights

Quality Control Inspector II

Quality Document Technician

Receiving Quality Inspector III

Quality Control Manager

Associate I, Quality Control (Tues. - Sat. 12:30pm to 9:00pm)

Quality Engineer (REQ743)

QC TECHNICIAN

Inspector III

Chemist II; Quality Control

Quality Inspector (Temp-to-perm)

Natural Gas Distribution QA/QC Specialist

Customer Complaint Specialist- 1st Shift

I want to receive the latest job alert for quality control in stamford ct

Related Searches

Explore jobs in more locations

Job Seeker Tools

Employer Tools

Browse

Stay Connected