Top 7 Welding inspector Jobs in Streetsboro, Oh

Floor Inspector
Falls Stamping & Welding/Newcan —Cuyahoga Falls, OH
- $16.87 - $17.37 an hour
- 8 hour shift
- Construction site
- No experience needed
- High school diploma or GED
- Health insurance
- Dental insurance
Quick Apply
Quality Layout Inspector
Falls Stamping and Welding Co —Cuyahoga Falls, OH
- From $19.56 an hour
- Full-time
- High school
- Computer literacy
- High school diploma or GED
Quick Apply
Project Quality Representative
Stevens —Cleveland, OH
- Construction site
- Mid-level
Certified Welding Inspector II
Terracon —United States
- $35.75 - $42.00 an hour
- Construction site
- Data analysis skills
- Maintenance
- Paid holidays
- Health insurance

More jobs to discover

Find similar jobs that you might be interested in.

Floor Inspector
Falls Stamping & Welding/Newcan —Cuyahoga Falls, OH
Due to the risk of electrical hazards while installing or servicing, additional personal protective equipment and procedures may need to be followed.
$16.87 - $17.37 an hour
Quick Apply
Fabrication Welder
Integrity Technical Services, Inc. —Youngstown, OH
*Welding Operations: *Perform high-quality MIG welding on both mild and stainless steel; utilize spray transfer MIG welding, tack welding, and stud welding…
$17 - $26 an hour
Quick Apply
1d

Show more similar jobs

Explore jobs in cities nearby

Check out jobs in cities near your current location, Columbus

CWI - Construction Inspector I
Terracon —Gahanna, OH
ACI certification not required if AWS CWI, ASNT Level II, VT, MT, PT, RT or UT certification(s) have been obtained and concrete field and laboratory testing is…
Quality Inspector III
Battelle —Columbus, OH
Associate degree in Engineering or a related technical field, or an equivalent combination of education and/or experience in a related field.
$50,000 - $60,000 a year

Show more jobs in cities nearby

I want to receive the latest job alert for welding inspector in streetsboro, oh

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

Explore jobs in more locations

welding inspector jobs near streetsboro, oh

Insurance Inspector jobs in Florida

Welding Inspector jobs in Mobile, AL

Field Inspector jobs in Cleveland, OH

Home Inspector jobs in Las Vegas, NV

Field Inspector jobs in Washington State

Quality Control Inspector jobs in Fremont, CA

Welding Inspector jobs in Corpus Christi, TX

Us Office Of Inspector General jobs in Washington, DC

Call Center Representative jobs in Columbus, OH

Quality Service Representative jobs in Dothan, AL

Quality Manager jobs in Boston, MA

3rd Shift Customer Service jobs in Milwaukee County, WI

Quality Service Representative jobs in Richburg, SC

French Customer Service jobs in New York, NY

Welding Inspector jobs in South Carolina

Welding jobs in Carson City, NV

Third Party Inspector jobs in Houston, TX

Welding Inspector jobs in Knoxville, TN

Welding Inspector jobs in Palm Desert, CA

Welding Inspector jobs in Seattle, WA

Floor Inspector

Falls Stamping & Welding/Newcan
Cuyahoga Falls, OH

Quick Apply

Job Details

Full-time
$16.87 - $17.37 an hour

Benefits

Health insurance
Dental insurance
401(k)
Paid time off
Employee assistance program
Vision insurance
401(k) matching
Life insurance
Referral program

Qualifications

Mechanical blueprint interpretation
Specialized industrial tools
Detail drawing interpretation
Quality check sheets
Dimensional inspection
Shop math
High school diploma or GED
Dimensional measurements
Blueprint dimension interpretation
Precision measurement in machining
Computer skills
Prototypes
Paper caliper measurement
Product quality failure

Full Job Description

Floor Inspector

Reports To: Shift Supervisor

FLSA Status: Non-Exempt

SUMMARY: Responsible for the quality of all incoming and outgoing products as well as floor auditing and inspections. You will be a firm advocate of quality in our products.

DUTIES AND RESPONSIBILITIES:

Reads blueprints and understands GD&T.
Uses standard and metric measuring equipment (micrometers, calipers, etc.)
Performs receiving inspection occasionally.
Assists in final inspections when required.
Performs inspection at machines per part specific inspection criteria.
Works with Quality Management on projects requiring inspection functions.
Assists with inspections of prototypes and new parts when required.
Assists production in verifying the operator is performing all inspections requirements on the inspection card are being followed.
Follow the requirements of WI-905 (Rejection Procedure) for non-conforming product.
Assist in layout inspection, if required.
Performs all other duties assigned.

QUALIFICATIONS:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Education and Experience - High School Diploma (or GED or High School Equivalence Certificate).
Language Skills – Ability to read, analyze, and interpret standard and metric measuring equipment such as micrometers, calipers, etc. Must be able to read and interpret blueprints.
Mathematical Skills –Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
Computer Skills: Document notes in computer as needed.

COMPETENCIES:

Attendance – Attendance refers to the consistency that an employee shows in turning up for work and completing their normal work hours.
Attention to Detail- Diligently attends to details and pursues quality in accomplishing tasks. Falls Stamping and Welding EMPLOYEE JOB DESCRIPTION
Drive for Results- Can be counted on to exceed goals successfully. Is constantly and consistently one of the top performers. Very bottom-line oriented. Steadfastly pushes self and others for results.
Work Quality- Work quality refers to the effort that consistently achieves desired outcomes with a minimum of avoidable errors and problems.
Work Quantity- Work quantity refers to the acceptable time in which the ordinary duties of the job may be satisfactorily completed. The amount of work depends on work speed, concentration, and endurance.

PHYSICAL DEMANDS:

While performing the duties of this job, the individual is constantly moving about the job site to determine the quality of parts being made. The individual needs to move about on the shop floor to transport parts, access tools, equipment, parts, and other necessary items to complete the work order. The individual frequently positions self to inspect parts. They use the hands continuously while performing all job duties. Most of the activities involve fine and gross manipulation of items. They must be able to exchange accurate information with other individuals in the office and shop. Must be able to detect part defects from short distances to determine what action needs to be taken. They must regularly push, pull, and/or move up to 30 pounds. The individual must be capable of carrying and loading different parts and tools required to complete the job.

WORK ENVIRONMENT:

While performing the duties of this Job, the employee is occasionally exposed to wet and/or humid conditions; moving mechanical parts. The noise level in the work environment is usually moderate. The individual will be exposed to loud machinery or equipment. Due to the risk of electrical hazards while installing or servicing, additional personal protective equipment and procedures may need to be followed.

Individuals are required to wear personal protective equipment as situations dictate on various job and construction sites. Due to exposure of machinery and electrical currents, employees are required to wear personal protective equipment such as eye protection, hearing protection, steel toe boots, and gloves. During warmer months, the required personal protective equipment may cause the employee to be very warm while working. The individual will be exposed to loud machinery or equipment.

Job Type: Full-time

Pay: $16.87 - $17.37 per hour

Expected hours: 40 – 50 per week

Benefits:

401(k)
401(k) matching
Dental insurance
Employee assistance program
Health insurance
Life insurance
Paid time off
Referral program
Vision insurance

Schedule:

8 hour shift
Day shift
Monday to Friday
Night shift

Work Location: In person

Quick Apply

Refine Your Search

welding inspector jobs in streetsboro, oh

Floor Inspector

Quality Layout Inspector

Project Quality Representative

Certified Welding Inspector II

More jobs to discover

Explore jobs in cities nearby

I want to receive the latest job alert for welding inspector in streetsboro, oh

Explore jobs in more locations

Job Seeker Tools

Employer Tools

Browse

Stay Connected