Top 18 Cad designer Jobs in Sycamore Il

Senior Electrical Engineer IV - Communications
OTTO Engineering —Carpentersville, IL
- $110,000 - $125,000 a year
- Online Application
- Customer service
- Research
- Mentoring
- Profit sharing
- Health savings account
Tooling Designer
Kenmode Tool & Engineering (Metal Stamping Company) —Algonquin, IL
- From $39 an hour
- Full-time
- Background check
- Mid-level
- Assembly
- Health savings account
- Disability insurance
Quick Apply
Closet Design Consultant
St. Charles Closets, Inc —Geneva, IL
- From $52,000 a year
- Full-time
- In person
- Mid-level
- US work authorization
- Computer skills
- Health insurance
- Dental insurance
Quick Apply
10d
Structural Graphic Designer
YORK CONTAINER COMPANY MIDWEST —Elgin, IL
- $85,000 - $105,000 a year
- Extended hours
- Microsoft Excel
- Microsoft Outlook
- 5 years
- Paid holidays
- Health insurance
Quick Apply
Designer/Drafter
Catalyst Acoustics Group —North Aurora, IL
- $50,000 - $60,000 a year
- Full-time
- Engineering
- Mid-level
- Office
- Paid holidays
- Dental insurance
Quick Apply
Laboratory Tooling Designer
SKF —Elgin, IL
- $65,000 - $74,000 a year
- Microsoft Excel
- English
- Mid-level
- Paid holidays
- Disability insurance
Designer- Industrial_28C1
Suncast Corporation —Batavia, IL
- $75,000 - $85,000 a year
- Extended hours
- Microsoft Word
- Microsoft Excel
- Office
- Paid parental leave
- Health savings account
Quick Apply
11d
Process Engineer
Suncast Corporation —Batavia, IL
- $75,000 - $95,000 a year
- Full-time
- CAD
- Mid-level
- Office
- Paid parental leave
- Health savings account
Quick Apply
Tooling Designer
Kenmode —Algonquin, IL
- $39 an hour
- Full-time
- Mid-level
- Assembly
- Analysis skills
Senior Design Engineer
Suncast Corporation —Batavia, IL
- $85,000 - $115,000 a year
- Full-time
- Computer literacy
- Bachelor of Science
- Engineering
- Paid parental leave
- Health savings account
Quick Apply
9d
Structural Designer
International Paper —Aurora, IL
- $78,100 - $86,800 a year
- Full-time
- Merchandising
- Mid-level
- Office
Mechanical Designer
Ipsen International Inc —Cherry Valley, IL
- Full-time
- Word processing
- Research
- Mid-level
- Paid time off
- 401(k) matching
Engineer II, Product Designer/Checking Analyst (Hybrid)
Collins Aerospace —Rockford, IL
- $68,900 - $131,100 a year
- Full-time
- Mid-level
- Office
- 2 years
- Paid holidays
- Loan repayment program
Industrial Workstation Designer
Segula Technologies —Belvidere, IL
- Full-time
- Mid-level
- 3 years
- Experience equivalent to degree accepted
Quick Apply
Product Design Engineer – Refrigeration
CFS Brands LLC —Batavia, IL
- $120,000 - $145,000 a year
- Full-time
- 5 years
- Laboratory experience
- Analysis skills
6d
Structural Engineer
ATMI PRECAST —Aurora, IL
- $100,000 - $120,000 a year
- Full-time
- Mid-level
- Master's degree
- Analysis skills
Quick Apply

More jobs to discover

Find similar jobs that you might be interested in.

Tooling Designer
Kenmode —Algonquin, IL
Applies knowledge of tool and die design and construction, shop mathematics, metal properties, machining processes, assembly procedures, and previous lessons…
$39 an hour
Supervisor, Tool & Die Design
OTTO Engineering —Carpentersville, IL
Design and develop progressive metal stamping tools, trim dies, fixtures, and gages for new and existing products. Occasional travel to customer sites required.
$45 - $65 an hour

Show more similar jobs

Explore jobs in cities nearby

Check out jobs in cities near your current location, Columbus

Drafter I
HEV —Grove City, OH
Utilizes established techniques, standards and tools like computer aided drafting software to prepare technical drawings. CAD and CAE software experience.
Designer
AEP Service Corporation —New Albany, OH
Must be able to operate a motor vehicle and possess and maintain a valid state driver's license. Documentation of work activities to be performed include:…
$22.14 - $44.80 an hour
9d

Show more jobs in cities nearby

I want to receive the latest job alert for cad designer in sycamore il

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

Senior Electrical Engineer IV - Communications

OTTO Engineering -
Carpentersville, IL

Apply Now

Job Details

Full-time
$110,000 - $125,000 a year

Benefits

Profit sharing
Health savings account
AD&D insurance
Paid holidays
Disability insurance
Health insurance
Dental insurance
Flexible spending account
Vision insurance
401(k) matching
Life insurance

Qualifications

Power electronics circuit design
CAD software
New product introduction engineering projects
Bachelor's degree in electrical engineering
Embedded systems
Communications systems expertise (engineering specialty)
Regulatory compliance
Electronic sensors
Equipment troubleshooting
Schematic development for electrical drafting
Research
Universal asynchronous receiver-transmitter (UART) protocol
Troubleshooting electrical systems
Telecommunications systems
Electrical engineering training
Bluetooth
Design engineering
Printed circuit board (PCB) layout
Product design
Design for manufacturability (DFM)
Serial peripheral interface (SPI) protocol
Technical troubleshooting support
Sensors
Product quality failure
Microprocessors
Failure analysis
Production troubleshooting

Full Job Description

Senior Electrical Engineer IV - Communications

Why join OTTO Engineering?

At OTTO, we don't just manufacture products—we engineer mission-critical solutions with precision and pride. Our Communications Division designs and manufactures ruggedized, application-specific communication systems built to perform when failure isn't an option, serving the military, law enforcement, public safety, and industrial customers worldwide.
As a core value, we focus on delivering for our customers through innovative technology, superior quality, value, and responsiveness … as a result, our growth continues!
Employees are our greatest asset, which is why we share our company's profits to celebrate our collective success.
As a privately-owned company, we are proud to invest significantly in our community and in our own growth, focusing on long-term business success.
We are proudly American!

Specifically, we are seeking experience with …

Product development from implementing feature requirements through production including designing for manufacturability
Electronic circuit design of digital and analog/audio circuits with bring-up skills & integration of initial HW/SW
Microprocessor peripheral interfaces (SDIO, I2C, SPI, RS232, Parallel and Serial/UART, JTAG)
Sensor selection (GPS, Accelerometer, IMU, etc.) and audio (speaker & mic) interface and design
Bluetooth, USB, and connectivity protocols

Our Senior Electrical Engineer IV will design circuitry for Communications and Power Management Products. Working on concept through production product development, as well as participate in the technical resolution of field and production issues. Prior experience in portable (battery powered) electronics, analog, audio, and digital circuitry is desired. The Senior Electrical Engineer IV should be able to work independently or be the lead engineer on a project. Ability to electrically architect new products and mentor junior Engineers. Degree of supervision required to perform job duties should not exceed 10%.

The Senior Electrical Engineer IV will:

Key contributor in the full product development life-cycle: concept, design, bring-up, integration of initial HW/SW, factory support, test & validation, and customer support
Create technical specifications from internal and customer product requirements
Drive architecture, design, prototyping, and test strategy
Lead component research, selection, and validation
Design digital interface logic, sensors, peripherals, microprocessors, memory, etc.
Design audio circuits (A/D & D/A converters, audio power amps, op-amps, etc.)
Design analog circuitry including filters, FETs, power supplies (linear and switchmode regulators), and battery monitoring & charging
Design and optimize circuits for minimal current drain consumption to maximize battery life
Generate schematics using Altium CAD. Provide guidance to a Printed Circuit Board Designer for routing, high speed interface, impedance matching, power routing, EMC Compliance, etc.
Generate Engineering Documentation: Schematics, BOMs, ECNs, Test Plans, and Specifications
Lead the electrical bring-up, debug, and validation of analog and digital designs
Hands-on design, troubleshooting, optimization, simulation, using oscilloscopes, DMM's, and other test equipment
Define and execute performance tests, reliability tests, EMC testing, and field failure analysis
Define requirements for circuit board level testing & test-coverage as well as of end-of-line functional product testing, including selection of test equipment
Collaborate with cross-functional teams including Sales, Quality, Mechanical, Firmware, and Manufacturing Engineers, to ensure timely product development and performance
Conduct and participate in design reviews and DFMEAs
Ensure compliance with industry standards including collaboration with test labs and regulatory agencies
Help provide project timelines and cost estimates
Contribute to the development of Intellectual Property
Assist with other related duties as required or assigned

What you'll need to bring to the table:

BSEE
U.S. Citizen
Minimum of 10 years of experience in concept-through-production product development
Proficiency in electronic circuit design of digital and analog/audio circuits with bring-up skills & integration of initial HW/SW
Experience in product development from implementing feature requirements through production including designing for manufacturability
Experience in microprocessor peripheral interfaces (SDIO, I2C, SPI, RS232, Parallel and Serial/UART, JTAG)
Experience with sensor selection (GPS, Accelerometer, IMU, etc) and audio (speaker & mic) interface and design
Strong understanding of Bluetooth, USB, and connectivity protocols
Knowledge of battery charging circuits and batteries
Experience employing mitigation methods and techniques to address circuit noise, meet ESD standards, and EMC Compliance
Knowledge of some embedded software is not required, but a plus
Demonstrated ability to troubleshoot and analyze product failures, and apply test results to design improvements
Experience using a Schematic/Layout CAD tool (Experience with Altium is a plus)
Demonstrated ability to prioritize, meet deadlines, and contribute to multiple simultaneous projects
Excellent communication and teamwork skills are essential
Flexible, results-oriented problem-solver who is a self-starter and who can work independently and as a member of a team

What OTTO offers for this specific position:

The hiring range listed in this posting is what we, in good faith, anticipate relying on when confirming a base salary for this position; exceptions may be considered for highly experienced candidates with multiple years of at-level experience.

Target base salary hiring range: $110,000 to $125,000, based on qualifications and experience.
Profit Sharing Bonus - OTTO believes that it's fair to share the profits that the employees help to make; profit sharing is distributed to employees twice a year. OTTO's profit sharing plan is paid at the discretion of the company and is not a guaranteed bonus or any part of a compensation plan.
Vacation: 120 hours - vacation time is earned on the anniversary date.

OTTO's Benefits:

Health:

Medical Insurance-

HMO Plan
Standard PPO Plan
Enhanced PPO Plan
High Deducible PPO Plan
FSA, LFSA, and HSA

Dental Insurance-

Base Plan
Buy-Up Plan

Vision Insurance

401(k) with a company match

Life insurance:

Life/AD&D
Voluntary Life/AD&D
Short-Term Disability
Long-Term Disability

10 paid holidays

Company picnic

Holiday party

AND numerous OTTO celebrations throughout the year!

To review all of OTTO's available opportunities, please visit our career page by clicking on the link below:

https://otto-engineering-inc.breezy.hr/

OTTO Engineering is an Equal Opportunity Employer: Disability/Veteran

Federal Notices

Federal EEOC - Know Your Rights (https://www.eeoc.gov/sites/default/files/2023-06/22-088_EEOC_KnowYourRights6.12ScreenRdr.pdf)

NLRB Notice (https://www.nlrb.gov/sites/default/files/attachments/pages/node-251/employee-rights-under-the-nlra-poster-two-page-85-x-11-version-pdf-2022.pdf)

E-Verify (https://8765373.fs1.hubspotusercontent-na1.net/hubfs/8765373/HR/E-Verify_Participation_Poster%20(002).pdf)

Request for Assistance / Reasonable Accommodation:

If you are a qualified individual with a disability or a disabled veteran, please let us know if you require a reasonable accommodation to complete any part of the online application process. You may request a reasonable accommodation if you are unable or limited in your ability to access job openings or apply for a job on this site as a result of your disability.

If you need an alternative method for applying, please contact OTTO Engineering via telephone at 847-428-7171 or email at HRDepartment @ ottoexcellence.com

These contact tools may be used only by individuals with a disability for accommodation requests; please do not inquire as to the status of an application.

OTTO Engineering does not accept unsolicited resumes from third party recruiters, agencies, or similar organizations; any submissions will not be honored.

Apply Now

Refine Your Search

cad designer jobs in sycamore il

Senior Electrical Engineer IV - Communications

Tooling Designer

Closet Design Consultant

Structural Graphic Designer

Designer/Drafter

Laboratory Tooling Designer

Designer- Industrial_28C1

Process Engineer

Tooling Designer

Senior Design Engineer

Structural Designer

Mechanical Designer

Engineer II, Product Designer/Checking Analyst (Hybrid)

Industrial Workstation Designer

Product Design Engineer – Refrigeration

Structural Engineer

More jobs to discover

Explore jobs in cities nearby

I want to receive the latest job alert for cad designer in sycamore il

Explore jobs in more locations

Job Seeker Tools

Employer Tools

Browse

Stay Connected