Top 3643 Process Analyzer Engineer Jobs

Test and Automation Engineer
Safran —Sarasota, FL
- Full-time
- Office
- 3 years
- Programmable logic controllers
Quick Apply
9d
Electrical Engineer
Crystal Group —Hiawatha, IA
- Full-time
- Background check
- Computer Science
- Bachelor of Science
- Health insurance
- Dental insurance
Senior Electrical Engineer
LifeSafer —Denver, CO
- $130,000 - $170,000 a year
- Full-time
- Bachelor of Science
- Salesforce
- In-person
- Dental insurance
- 401(k)
3d
Senior Electrical Engineer
Optical Zonu Corp. —Van Nuys, CA
- $100,000 - $175,000 a year
- Full-time
- Laboratory experience
- Analysis skills
- Continuous improvement
- Health insurance
- Dental insurance
Quick Apply
3d
Field Service Technician
Linde —Malta, NY
- $75,000 - $90,000 a year
- Full-time
- Background check
- Schematics
- Customer service
- Health savings account
- Paid holidays
Quick Apply
Test Engineer
S&B Industry, Inc. —Fort Worth, TX
- $65,000 - $70,000 a year
- Full-time
- Software troubleshooting
- Mid-level
- Analysis skills
- Health insurance
- Dental insurance
Quick Apply
I&E Specialist
Energy Transfer Partners —Midland, TX
- Full-time
- Microsoft Word
- Microsoft Excel
- Construction site
- Profit sharing
- Paid time off
Quick Apply
DAS Systems Performance Engineer II- AZ
Communication Technology Services Inc —Phoenix, AZ
- $80,000 - $120,000 a year
- Full-time
- Microsoft Excel
- Customer service
- 5 years
- Paid holidays
- Health insurance
Test Supervisor
dB Control —Fremont, CA
- $80,000 - $100,000 a year
- Full-time
- Mid-level
- Analysis skills
- Bachelor's degree
- Health savings account
- Health insurance
Quick Apply
Senior Embedded Systems Engineer
Micro Control Company —Fridley, MN
- $111,123 - $123,470 a year
- Full-time
- System design
- Mid-level
- Master's degree
- Profit sharing
- Health savings account
Quick Apply
O&M Technician I
Alliance Energy —Wilmington, CA
- $30 - $42 an hour
- Overtime
- Microsoft Word
- Computer literacy
- Forklift
- Health savings account
- Health insurance
Quick Apply
Value Analysis and Value Engineering Engineer
AMETEK —Pittsburgh, PA
- $75,000 - $105,000 a year
- Full-time
- Microsoft Excel
- ERP systems
- Mid-level
- Health savings account
- Health insurance
Quick Apply
8d
Senior Failure Analysis Engineer
Virtium —RSM, CA
- $140,000 - $160,000 a year
- Full-time
- Management
- Master's degree
- 8 years
Quick Apply
Design and Production Mechanical Engineer - Radar Systems
Paragon Force, Inc —Crane, IN
- Full-time
- Schematics
- Mid-level
- Analysis skills
- Health savings account
- Health insurance
Quick Apply
Lead Test Engineer
Coherent Corp. —Fremont, CA
- $100,625 - $172,250 a year
- Overtime
- Hybrid work
- Senior level
- Electrical Engineering
- Communication skills
Production Technician
Linde —Camas, WA
- $57,225 - $83,930 an hour
- Extended hours
- Background check
- Mid-level
- Office
- Health savings account
- Paid holidays
Quick Apply
Engineer, Electrical Analytical
Constellation Energy —Braceville, IL
- $87,000 - $154,000 a year
- Engineering
- Mid-level
- Electrical Engineering
- Employee stock purchase plan
- Paid holidays
Senior Electrical Engineer
CooperSurgical —Trumbull, CT
- $93,000 - $129,000 a year
- Full-time
- Mid-level
- Analysis skills
- Travel
- Health savings account
- Health insurance
Quick Apply
Principal Engineer-Systems Design
Microchip Technology —Mount Holly Springs, PA
- $75,000 - $232,000 a year
- Full-time
- Microsoft Excel
- Travel
- In-person
- Employee stock purchase plan
- Health insurance
Hardware Lead Design Engineer
TMP Worldwide India Private Limited for ERS US —Milpitas, CA
- $83,000 - $128,000 a year
- Email
- Analysis skills
- In-person
- Senior level
- AD&D insurance
- Paid holidays
Quick Apply

I want to receive the latest job alert for Process Analyzer Engineer

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

Explore jobs in more locations

Process Analyzer Engineer jobs near

Test and Automation Engineer

Safran -
Sarasota, FL

Quick Apply

Job Details

Full-time
9 days ago

Qualifications

LabVIEW
Controlling experience
Content creation for technical audiences
Data analysis reporting
Technical documentation
Technical writing experience within manufacturing
Test automation
Data summary reports
Electrical safety procedures
Programmable logic controllers
PLC programming
Embla
Commissioning phase involvement
Electrical Engineering
Field commissioning
Engineering automation testing
Electrical systems commissioning
Cross-functional communication
Automated test equipment (ATE)

Full Job Description

Summary:
The Test & Automation Engineer designs, develops, and deploys automated test equipment (ATE) and test methods for electrical generators and components including electrical, mechanical, and dynamic (vibration/environmental) testing across all development and production phases. The role also applies automation principles to manufacturing processes (PLC/SCADA/industrial controls) to improve throughput, quality, and cost. Responsibilities include requirements decomposition, hardware/software architecture, LabVIEW/Test Stand and PLC development, data acquisition/analysis, and compliance with aerospace, industrial, and Health & Safety requirements.

Essential Duties & Responsibilities:

Consolidate all data (users, context) in order to develop a complete system architecture.
Understand and translate user requirements into solutions.
Master the overall design of an automated/computerized system, integrating scalability and sustainability aspects
Model and break down the system to make technical choices regarding hardware, software, or application packages.
Manage the project from preliminary design to acceptance and estimate the work in terms of costs and deadlines.
Design and implement test and validation plans
Manage subcontractors (studies, implementations),
Integrate configuration management, documentation, and training,
Ensure the interface with other engineering and manufacturing partners based on project scope.
Test system & ATE design
Build, and validate modular ATE; integrate measuring devices, power supplies, DAQ, and motion/IO for automated electrical and dynamic tests.
Produce simulation/trade studies (e.g., load profiles, harmonics, thermal, and vibration exposure) to set test limits and protect DUTs and assets. Consider signal and power quality parameters and design safeguarding measures to prevent DUT and/or company assets impact.

Test methods, execution & complianceManufacturing automation & industrial controlsSafety, quality & governance

Translate system and regulatory requirements into test plans, procedures, sequences, and reports for development, qualification, and production acceptance; manage results traceability and signal troubleshooting
Plan and design test equipment and sequences aligned to aerospace environmental/electrical standards
Where applicable, support the development of calibrations method for signal and automatic operations parameters
Develops and creates process documentation for safe operations of the ATE and Automated Means.
Design and deploy PLC/SCADA automation for manufacturing and end of line testing
Collaborate with IT/IS and Digital teams to develop, deploy, and support the digitalization of the industrial activities across the production lines
Translate manufacturing practices to automation specifications for external collaboration with vendors and other automation parties.
Ensure adherence to AS9100 processes and site safety programsJob Requirements

Basic Qualifications:

Bachelor's degree in Electrical Engineering or Automation Engineering and 3 years related field experience.
Hands on development with NI LabVIEW and DAQ data acquisition
Proficiency in electrical measurements and instrumentation (e.g., power analyzers, scope, DMM, DAQ, SMU), test data capture/analysis, and technical reporting.
PLC/controls experience for manufacturing automation, interlocks, and end of line testing.
Working grasp of standards for safe commissioning/maintenance of energized systems.
Clear, concise technical writing (plans, procedures, reports) and cross functional communication with design, quality, and operations.

Preferred Qualifications:

5+ years of working experience in automation and/or ATE designs
Background in power electronics (e.g., H bridge drivers, inverter topologies) and harmonics/power quality
Familiarity with NEMA MG 1 for motors/generators and rotating machine testing nuances.
CAD design to support development efforts.
Scripting or application development (e.g., Python, C/C#) to extend test capabilities, parse results, or integrate databases/APIs.
Familiarity with site existing platforms: Mitsubishi, Rockwell Automation, and DirectLOGIC PLC platforms.

Physical Demands:
Stationary 40% / Mobility 60% (lifting up to 25 lbs)

Work Environment:
Equal split between office work and working on a production line building engineering orders.

Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. This job posting does not constitute a written or implied contract of employment.

This position requires access to technologies and hardware subject to US national security based export control requirements. All applicants must be US Persons (8 USC 1324b(a)(3)), or otherwise authorized by the U.S. Government. No company sponsorship will be offered.

This description has been designed to indicate the general nature and level of work performed by an employee within this position. The actual duties, responsibilities and qualifications may vary based on assignment or group. All qualified applicants will receive consideration for employment without regard to race, color, age, ethnicity, religion, sex, sexual orientation, gender identify, national origin, disability, veteran status, genetic data or other legally protected status.

But what else? (advantages, specific features, etc.)

Drives 6S culture by improving and maintaining the cleanliness, safety, and organization of new work area.
Cross functional collaboration & project delivery
Partner with Design Engineering to define verification methods and DFT/DFM inputs
Coordinate facility changes for new equipment installation; manage vendors/subcontractors when outsourcing fixture builds.
Lead root cause analysis for automated equipment failures during the new product development activities and support Means Sustaining team on existing ATEs
Occasional travel for commissioning or supplier/customer test events.
Must be willing to work outside of normal working hours as necessary to reduce impact on production activities.Safran Electrical and Power is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. To verify the information in the job listing or if you need special assistance or an accommodation while seeking employment, please call: 941-210-8648. We will decide on your request for reasonable accommodation on a case-by-case basis.

Refine Your Search

Process Analyzer Engineer jobs

Test and Automation Engineer

Electrical Engineer

Senior Electrical Engineer

Senior Electrical Engineer

Field Service Technician

Test Engineer

I&E Specialist

DAS Systems Performance Engineer II- AZ

Test Supervisor

Senior Embedded Systems Engineer

O&M Technician I

Value Analysis and Value Engineering Engineer

Senior Failure Analysis Engineer

Design and Production Mechanical Engineer - Radar Systems

Lead Test Engineer

Production Technician

Engineer, Electrical Analytical

Senior Electrical Engineer

Principal Engineer-Systems Design

Hardware Lead Design Engineer

I want to receive the latest job alert for Process Analyzer Engineer

Related Searches

Explore jobs in more locations

Job Seeker Tools

Employer Tools

Browse

Stay Connected