Top 43267 Test Application Engineer Jobs

Test and Automation Engineer
Safran —Sarasota, FL
- Full-time
- Office
- 3 years
- Programmable logic controllers
Quick Apply
11d
Research Engineer
Steel Founders' Society of America —Crystal Lake, IL
- From $62,000 a year
- Full-time
- Engineering
- Mid-level
- Office
- Health insurance
- Dental insurance
Quick Apply
FPGA/DSP Design Engineer (VHDL/Verilog)
Escape Communications —Torrance, CA
- $130,000 - $160,000 a year
- Full-time
- Computer Science
- Laboratory experience
- Mid-level
- Health savings account
- Disability insurance
Quick Apply
Test Engineer II/III
Crane Aerospace & Electronics —Burbank, CA
- $95,700 - $138,584 a year
- Full-time
- Background check
- Bachelor of Science
- Pass drug screening
- Paid holidays
- Disability insurance
Senior Electrical Engineer
Optical Zonu Corp. —Van Nuys, CA
- $100,000 - $175,000 a year
- Full-time
- Laboratory experience
- Analysis skills
- Continuous improvement
- Health insurance
- Dental insurance
Quick Apply
5d
Controls Engineer
Cardinal Automation LLC —Oklahoma City, OK
- $110,000 - $140,000 a year
- Full-time
- Background check
- Microsoft Excel
- Microsoft Outlook
- Health savings account
- Relocation assistance
Quick Apply
Controls Engineer Department Head
Rhino Pumps —Pleasant Grove, UT
- $95,000 - $125,000 a year
- 8 hour shift
- Management
- Experience equivalent to degree accepted
- In-person
- Health savings account
- 401(k) matching
Quick Apply
4d
Test Engineer
Schweitzer Engineering Laboratories, Inc. —Lewiston, ID
- $84,200 - $170,400 a year
- Full-time
- Bachelor of Science
- Mid-level
- Residential
- Tuition reimbursement
- Employee stock ownership plan
Quick Apply
Test Engineer
Schweitzer Engineering Laboratories, Inc. —Pullman, WA
- $84,200 - $170,400 a year
- Full-time
- Bachelor of Science
- Mid-level
- Residential
- Tuition reimbursement
- Employee stock ownership plan
Quick Apply
Design Engineer
Pacific Aero Tech, LLC —Kent, WA
- $85,000 - $115,000 a year
- Full-time
- Engineering
- 3 years
- Assembly
- Health savings account
- Health insurance
Quick Apply
Printed Circuit Board Assembly (PCBA) Designer 2+ Years Experience
Coda Octopus Engineering, Inc. —Murray, UT
- $90,000 - $120,000 a year
- Full-time
- Background check
- Bachelor of Science
- Mid-level
- Health savings account
- Health insurance
Quick Apply
Engineer Motors /Supervisor
Everson Tesla Inc —Nazareth, PA
- $79,000 - $88,000 a year
- 8 hour shift
- Microsoft PowerPoint
- Microsoft Word
- Background check
- Health insurance
- Dental insurance
Quick Apply
Senior PHP / Laravel Engineer
Lendzi —Boca Raton, FL
- From $75,000 a year
- Full-time
- Hybrid work
- 7 years
- Office
- Senior level
- Health insurance
- Dental insurance
Quick Apply
Network Engineer
Logix Fiber Networks —Houston, TX
- Full-time
- Hybrid work
- Background check
- Microsoft Excel
- Microsoft Outlook
- Health insurance
- Dental insurance
Quick Apply
Principal Engineer, Power Design
Celestica —Austin, TX
- 11+ years
- Research
- Office
Guidance Navigation Control Engineer
ASD —Chandler, AZ
- $80 - $94 an hour
- Full-time
- Background check
- System design
- Mid-level
- Relocation assistance
Quick Apply
6d
Senior Mechanical Engineer
Ecotope, Inc. —Seattle, WA
- $106,290 - $164,402 a year
- Email
- Hybrid work
- AutoCAD
- Construction site
- Office
- Profit sharing
- Health insurance
Quick Apply
Senior Electrical Design Engineer
ESI Motion —Simi Valley, CA
- $160,000 - $175,000 a year
- Full-time
- Microsoft Excel
- English
- Windows
- Health savings account
- Health insurance
Quick Apply
Model-Based Systems Engineer
Modern Technology Solutions, Inc —Lexington Park, MD
- System design
- Bachelor's degree
- Senior level
- Disability insurance
- Health insurance
Cryogenic & Thermal Systems Engineer
American Superconductor NE —Ayer, MA
- $140,000 - $180,000 a year
- Full-time
- Master's degree
- Analysis skills
- Doctor of Philosophy
Quick Apply

I want to receive the latest job alert for Test Application Engineer

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

Explore jobs in more locations

Test Application Engineer jobs near

Test and Automation Engineer

Safran -
Sarasota, FL

Quick Apply

Job Details

Full-time
11 days ago

Qualifications

LabVIEW
Controlling experience
Content creation for technical audiences
Data analysis reporting
Technical documentation
Technical writing experience within manufacturing
Test automation
Data summary reports
Electrical safety procedures
Programmable logic controllers
PLC programming
Embla
Commissioning phase involvement
Electrical Engineering
Field commissioning
Engineering automation testing
Electrical systems commissioning
Cross-functional communication
Automated test equipment (ATE)

Full Job Description

Summary:
The Test & Automation Engineer designs, develops, and deploys automated test equipment (ATE) and test methods for electrical generators and components including electrical, mechanical, and dynamic (vibration/environmental) testing across all development and production phases. The role also applies automation principles to manufacturing processes (PLC/SCADA/industrial controls) to improve throughput, quality, and cost. Responsibilities include requirements decomposition, hardware/software architecture, LabVIEW/Test Stand and PLC development, data acquisition/analysis, and compliance with aerospace, industrial, and Health & Safety requirements.

Essential Duties & Responsibilities:

Consolidate all data (users, context) in order to develop a complete system architecture.
Understand and translate user requirements into solutions.
Master the overall design of an automated/computerized system, integrating scalability and sustainability aspects
Model and break down the system to make technical choices regarding hardware, software, or application packages.
Manage the project from preliminary design to acceptance and estimate the work in terms of costs and deadlines.
Design and implement test and validation plans
Manage subcontractors (studies, implementations),
Integrate configuration management, documentation, and training,
Ensure the interface with other engineering and manufacturing partners based on project scope.
Test system & ATE design
Build, and validate modular ATE; integrate measuring devices, power supplies, DAQ, and motion/IO for automated electrical and dynamic tests.
Produce simulation/trade studies (e.g., load profiles, harmonics, thermal, and vibration exposure) to set test limits and protect DUTs and assets. Consider signal and power quality parameters and design safeguarding measures to prevent DUT and/or company assets impact.

Test methods, execution & complianceManufacturing automation & industrial controlsSafety, quality & governance

Translate system and regulatory requirements into test plans, procedures, sequences, and reports for development, qualification, and production acceptance; manage results traceability and signal troubleshooting
Plan and design test equipment and sequences aligned to aerospace environmental/electrical standards
Where applicable, support the development of calibrations method for signal and automatic operations parameters
Develops and creates process documentation for safe operations of the ATE and Automated Means.
Design and deploy PLC/SCADA automation for manufacturing and end of line testing
Collaborate with IT/IS and Digital teams to develop, deploy, and support the digitalization of the industrial activities across the production lines
Translate manufacturing practices to automation specifications for external collaboration with vendors and other automation parties.
Ensure adherence to AS9100 processes and site safety programsJob Requirements

Basic Qualifications:

Bachelor's degree in Electrical Engineering or Automation Engineering and 3 years related field experience.
Hands on development with NI LabVIEW and DAQ data acquisition
Proficiency in electrical measurements and instrumentation (e.g., power analyzers, scope, DMM, DAQ, SMU), test data capture/analysis, and technical reporting.
PLC/controls experience for manufacturing automation, interlocks, and end of line testing.
Working grasp of standards for safe commissioning/maintenance of energized systems.
Clear, concise technical writing (plans, procedures, reports) and cross functional communication with design, quality, and operations.

Preferred Qualifications:

5+ years of working experience in automation and/or ATE designs
Background in power electronics (e.g., H bridge drivers, inverter topologies) and harmonics/power quality
Familiarity with NEMA MG 1 for motors/generators and rotating machine testing nuances.
CAD design to support development efforts.
Scripting or application development (e.g., Python, C/C#) to extend test capabilities, parse results, or integrate databases/APIs.
Familiarity with site existing platforms: Mitsubishi, Rockwell Automation, and DirectLOGIC PLC platforms.

Physical Demands:
Stationary 40% / Mobility 60% (lifting up to 25 lbs)

Work Environment:
Equal split between office work and working on a production line building engineering orders.

Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. This job posting does not constitute a written or implied contract of employment.

This position requires access to technologies and hardware subject to US national security based export control requirements. All applicants must be US Persons (8 USC 1324b(a)(3)), or otherwise authorized by the U.S. Government. No company sponsorship will be offered.

This description has been designed to indicate the general nature and level of work performed by an employee within this position. The actual duties, responsibilities and qualifications may vary based on assignment or group. All qualified applicants will receive consideration for employment without regard to race, color, age, ethnicity, religion, sex, sexual orientation, gender identify, national origin, disability, veteran status, genetic data or other legally protected status.

But what else? (advantages, specific features, etc.)

Drives 6S culture by improving and maintaining the cleanliness, safety, and organization of new work area.
Cross functional collaboration & project delivery
Partner with Design Engineering to define verification methods and DFT/DFM inputs
Coordinate facility changes for new equipment installation; manage vendors/subcontractors when outsourcing fixture builds.
Lead root cause analysis for automated equipment failures during the new product development activities and support Means Sustaining team on existing ATEs
Occasional travel for commissioning or supplier/customer test events.
Must be willing to work outside of normal working hours as necessary to reduce impact on production activities.Safran Electrical and Power is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. To verify the information in the job listing or if you need special assistance or an accommodation while seeking employment, please call: 941-210-8648. We will decide on your request for reasonable accommodation on a case-by-case basis.

Refine Your Search

Test Application Engineer jobs

Test and Automation Engineer

Research Engineer

FPGA/DSP Design Engineer (VHDL/Verilog)

Test Engineer II/III

Senior Electrical Engineer

Controls Engineer

Controls Engineer Department Head

Test Engineer

Test Engineer

Design Engineer

Printed Circuit Board Assembly (PCBA) Designer 2+ Years Experience

Engineer Motors /Supervisor

Senior PHP / Laravel Engineer

Network Engineer

Principal Engineer, Power Design

Guidance Navigation Control Engineer

Senior Mechanical Engineer

Senior Electrical Design Engineer

Model-Based Systems Engineer

Cryogenic & Thermal Systems Engineer

I want to receive the latest job alert for Test Application Engineer

Related Searches

Explore jobs in more locations

Job Seeker Tools

Employer Tools

Browse

Stay Connected