Top 2193 Mechanical technician Jobs in Denver Co

Instrumentation Technician
Instrumentation Technician —Centennial, CO
- $39 - $50 an hour
- Full-time
- Military
- Mid-level
- In-person
- Health savings account
- Relocation assistance
Quick Apply
9d
Maintenance Technician
DeLine Box & Display —Denver, CO
- $30 - $40 an hour
- Full-time
- Mid-level
- Manufacturing
- Associate's degree
- AD&D insurance
- Paid holidays
Quick Apply
Industrial Maintenance Technician - Wheat Ridge
International Paper —Wheat Ridge, CO
- $35.72 - $41.33 an hour
- 8 hour shift
- Maintenance
- Mid-level
- Programmable logic controllers
- Health savings account
- Disability insurance
Quick Apply
Generator Technician
Power Plus —Denver, CO
- $104,760 - $130,500 a year
- Full-time
- Military
- Mid-level
- Forklift
- Health insurance
- Dental insurance
Quick Apply
6d
Assembly Technician
Crusoe —Arvada, CO
- $23 - $28 an hour
- Full-time
- Background check
- Ability to walk for extended periods
- Forklift
- Commuter assistance
- Paid parental leave
Quick Apply
Data Center Hardware Technician
Crusoe —Denver, CO
- $90,000 - $100,000 a year
- Full-time
- Mid-level
- Analysis skills
- Team management
- Commuter assistance
- Paid parental leave
Quick Apply
TECHNICIANS of all LEVELS for Downing Street Garage
Downing Street Garage —Denver, CO
- $75,000 - $150,000 a year
- Full-time
- Mid-level
- Power tools
- In-person
- Paid holidays
- Health insurance
Quick Apply
Fiber Technician I - Lakewood, Englewood, Littleton, Highlands Ranch, Parker CO
Forged Fiber 37 —Englewood, CO
- $30.30 - $36.00 an hour
- 8 hour shift
- Background check
- Pass drug screening
- No experience needed
Quick Apply
Assembly & Test Technician - Level 2 (1st shift)
Honeywell —Arvada, CO
- $26 - $32 an hour
- Full-time
- Mid-level
- 3 years
- Manufacturing
- Health savings account
- Paid holidays
Mercedes Benz Passenger Car Technician
Mercedes-Benz of Littleton —Littleton, CO
- Up to $100 an hour
- Full-time
- Background check
- Clean driving record
- Dealership
- Relocation assistance
- Health insurance
Quick Apply
Commercial HVAC Mechanical Service Technician Must Have 5+ Years - Must Live in Denver Metro Area
Conditioned Air Corporation —Denver, CO
- $37.50 - $55.00 an hour
- 8 hour shift
- Driver's License
- Criminal background check
- Clean MVR report
- Paid training
- Fuel card
Quick Apply
Fleet Maintenance Technician Class B
Chick-fil-A Supply LLC —Aurora, CO
- $80,000 - $90,000 a year
- Weekends as needed
- ASE Certification
- Ability to walk for extended periods
- Writing skills
- Health insurance
- Dental insurance
Volvo Technician
McDonald Automotive —Littleton, CO
- $18.16 - $45.00 an hour
- Clean driving record
- Dealership
- 5 years
- Health savings account
- AD&D insurance
Quick Apply
Commercial HVAC Service Manager
Colorado Chiller Services —Denver, CO
- $80,000 - $140,000 a year
- Full-time
- English
- Contracts
- In-person
- Health insurance
- 401(k)
Quick Apply
Mechanic - Automotive Technician (looking for 5 years exp min.) FLAT RATE
Addison Auto Repair & Body Shop —Denver, CO
- $38 - $45 an hour
- Weekends as needed
- ASE Certification
- Driver's License
- Electrical experience
- Paid training
- Health savings account
Quick Apply
Field Service Technician - Industrial- Denver CO
IPG —Denver, CO
- $20.53 - $23.53 an hour
- Extended hours
- Clean driving record
- Ability to walk for extended periods
- Mid-level
- On-the-job training
Quick Apply
Lead Fleet Maintenance Technician
Chick-fil-A Supply LLC —Aurora, CO
- $105,000 - $115,000 a year
- Weekends as needed
- ASE Certification
- Ability to walk for extended periods
- Writing skills
- Health insurance
- Dental insurance
Maintenance Technician I
Graceada Partners —Lakewood, CO
- $21 - $23 an hour
- Full-time
- Schematics
- Maintenance
- English
- Health insurance
- Dental insurance
Quick Apply
A/B Master Service Technician
Sun Powersports —Thornton, CO
- $80,000 - $120,000 a year
- Email
- Dealership
- Mid-level
- Driver's License
- Paid training
- Paid holidays
Quick Apply
Residential HVAC installation Trainer/Manager. 6+ years residential HVAC experience mandatory
Ponderosa Heating Air Plumbing Electrical —Golden, CO
- $90,000 - $160,000 a year
- Full-time
- Classroom
- Google Workspace
- Clean driving record
- Paid holidays
- Health insurance
Quick Apply

I want to receive the latest job alert for mechanical technician in denver co

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

Explore jobs in more locations

mechanical technician jobs near denver co

Instrumentation Technician

Instrumentation Technician
Centennial, CO

Quick Apply

Job Details

Full-time
$39 - $50 an hour
9 days ago

Benefits

Health savings account
Relocation assistance
Health insurance
Dental insurance
401(k)
Flexible spending account
Paid time off
Parental leave
Employee assistance program
Vision insurance
401(k) matching
Professional development assistance
Life insurance

Qualifications

LabVIEW
Fabrication
Military
Airframe & Powerplant License
Electrical troubleshooting

Full Job Description

Boom is building Superpower, a first-of-kind industrial gas turbine for AI data centers. It is one of the most instrumentation-intensive programs in energy right now — and none of the data that proves the design works gets collected without the person who installs the sensors, fabricates the harnesses, configures the DAQ, and supports testing/validation of the instrumentation systems. That person is this role.

Not an MRO/Production technician role

Most instrumentation jobs exist inside an established system — LRUs documented, installation procedures approved, calibration standards published. You show up, you follow the procedure, you install to the standard.

This is not that job.

We have engineers designing instrumentation architectures for hardware that has never been built. What we do not have is someone who can sit alongside them, fabricate the harnesses from a wiring diagram, install the sensors on prototype hardware, configure the DAQ system, and push back when a routing won't work as drawn. You are working at the front edge of the program — where the procedure doesn't exist yet and you help write it.

What you'll do

Fabricate, install, and verify wiring harnesses and cable assemblies for engine instrumentation packages — from raw wire through connector termination, continuity check, and build record closeout

Install and bond sensors across all measurement types used in engine and structural testing: pressure transducers, thermocouples and RTDs, strain gauges, accelerometers, load cells, and vibration sensors

Support active test operations — setup, monitoring, troubleshooting, and teardown.

Integrate instrumentation systems — engine health monitoring— per installation drawings.

Perform functional and acceptance tests on installed instrumentation

Troubleshoot anomalies during build and test — document findings, isolate fault sources, and participate in root cause analysis before escalating to engineering

Own your documentation: build records, calibration logs, test data packages, nonconformance reports, and deviation records are part of every task

This job is demanding

You will walk into a program where the instrumentation architecture is still being defined and the wiring diagrams are still being drawn. Sensors won't always fit where they were modeled. Connectors will conflict with structure. Calibration will reveal sensor drift no one anticipated.

Your job is to catch those problems early — before they corrupt test data or delay a test event — and work with engineering to resolve them rather than waiting for a revised drawing.

That requires real hands-on skill, documentation discipline, and the confidence to tell an engineer that the routing won't work before you build it.

You probably have

Hands-on avionics installation, or flight test support experience

Direct experience instrumenting gas turbine, propulsion, or aerospace test articles.

Demonstrated proficiency fabricating wire harnesses and cable assemblies from schematics — not just installing pre-fabricated harnesses

Experience installing and bonding sensors for structural or propulsion test applications

Working knowledge of data acquisition systems: channel configuration, signal conditioning, calibration verification

Disciplined documentation habits and working knowledge of aerospace quality standards (AS9100, MIL-spec awareness)

Experience on experimental, prototype, or R&D programs — not production or steady-state MRO

It would be great if you have

FAA Airframe & Powerplant (A&P) certificate or FCC General Radiotelephone Operator License (GROL)

Military avionics maintenance background — 2A5X4, 15N, AV-8B/F-16/F/A-18 platform experience, or equivalent

Flight test instrumentation experience — strain gauge installation, pitot-static plumbing, onboard data acquisition

NI LabVIEW or IADS/Curtiss-Wright DAQ configuration experience

IPC/WHMA-A-620 or NASA-STD-8739.4 soldering and wire harness certification

Ability to work in both electrical and mechanical domains without hand-holding.

CAD navigation experience — able to open a 3D model and verify sensor location and routing access

Experience supporting test programs where the schedule was real and the pace was unforgiving.

Why Boom

Superpower is the first industrial turbine purpose-built for AI data center loads. The market it is targeting is growing faster than grid infrastructure can serve it. The hardware is novel, the test timeline is aggressive, and the instrumentation that validates it has to be right.

You will be among the first technicians to instrument a Superpower turbine. The calibration records you maintain, the sensors you install, and the anomalies you catch will directly shape whether the design gets validated on schedule — and whether the commercial units that follow it perform as designed.

The engine core is shared with Overture. The skills and instincts you build on Superpower compound across both programs. There is no equivalent role at an established OEM where first-article engine instrumentation is still being figured out in real time.

If instrumenting a turbine that has never existed before — and building the data foundation that proves it works — is the job you have been waiting for, apply.

Compensation

The Base Rate for this position is $39 - $50 per hour. Actual rate will vary based on factors including but not limited to location, experience, and performance. The range listed is just one component of Boom’s total rewards package for employees. Other rewards may include long term incentives/equity, a flexible PTO policy, and many other progressive benefits.

There is no set deadline to apply for this job opportunity. Applications will be accepted on an ongoing basis until the search is no longer active.

ITAR Requirement

To conform to U.S. Government aerospace technology export regulations (ITAR and EAR), applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about ITAR here.

Boom is an equal opportunity employer and we value diversity. All employment is decided on the basis of qualifications, merit and business need.

Want to build a faster future? Come join Boom.

Pay: $39.00 - $50.00 per hour

Benefits:

401(k)
401(k) matching
Dental insurance
Employee assistance program
Flexible spending account
Health insurance
Health savings account
Life insurance
Paid time off
Parental leave
Professional development assistance
Relocation assistance
Vision insurance

Work Location: In person

Quick Apply

Refine Your Search

mechanical technician jobs in denver co

Instrumentation Technician

Maintenance Technician

Industrial Maintenance Technician - Wheat Ridge

Generator Technician

Assembly Technician

Data Center Hardware Technician

TECHNICIANS of all LEVELS for Downing Street Garage

Fiber Technician I - Lakewood, Englewood, Littleton, Highlands Ranch, Parker CO

Assembly & Test Technician - Level 2 (1st shift)

Mercedes Benz Passenger Car Technician

Commercial HVAC Mechanical Service Technician Must Have 5+ Years - Must Live in Denver Metro Area

Fleet Maintenance Technician Class B

Volvo Technician

Commercial HVAC Service Manager

Mechanic - Automotive Technician (looking for 5 years exp min.) FLAT RATE

Field Service Technician - Industrial- Denver CO

Lead Fleet Maintenance Technician

Maintenance Technician I

A/B Master Service Technician

Residential HVAC installation Trainer/Manager. 6+ years residential HVAC experience mandatory

I want to receive the latest job alert for mechanical technician in denver co

Related Searches

Explore jobs in more locations

Job Seeker Tools

Employer Tools

Browse

Stay Connected