Top 141 Controls technician Jobs in Henderson, Tx

Maintenance Technician I/E
Westlake —Longview, TX
- Overtime
- 5 years
- Mid-level
- Office
Quick Apply
Product Test Technician
EnPro Industries —Longview, TX
- Full-time
- Word processing
- Windows
- High school diploma or GED
Engineering Technician/Senior Engineering Technician- 2nd Shift
Camfil USA Inc. —Kilgore, TX
- 5 years
- Ability to lift 50 pounds
- Analysis skills
Engineering Technician/Senior Engineering Technician
Camfil USA Inc. —Kilgore, TX
- 5 years
- Ability to lift 50 pounds
- Analysis skills
Quality Assurance Tech-2nd shift
Camfil USA Inc. —Kilgore, TX
- 5 years
- Basic math
- Mid-level
Lead PLC Control Technician
Divcon Controls —Texas
- Full-time
- Management
- Ability to walk for extended periods
- Ability to climb stairs
- Paid training
- Disability insurance
Quick Apply
Field Service Technician II – Commercial Kitchen & Laundry Equipment
CKL SOLUTIONS-Commercial Kitchen & Laundry Solutions, LLC —Tatum, TX
- $59,438 - $63,079 a year
- Email
- Hybrid work
- Background check
- Clean driving record
- Maintenance
- Paid training
- Fuel card
Quick Apply
Field Service Technician
Matthews International Corporation —Texas
- Computer science
- Computer Science
- Pass drug screening
Multi-Craft Maintenance Technician
Tampico Bottling Company —Henderson, TX
- $30 - $35 an hour
- Weekends as needed
- 3 years
- Ability to climb stairs
- Ability to lift 50 pounds
- Wellness program
- Health savings account
Quick Apply
Quality Asurance Technician (All Shifts)
AAON —Longview, TX
- Full-time
- Microsoft Outlook
- Computer literacy
- Mid-level
Electrical Technician
E Tech Group —Longview, TX
- Computer literacy
- High school diploma or GED
- Computer skills
- Paid holidays
- Health insurance
Quick Apply
1d
ASSISTANT NDE TECHNICIAN
NONDESTRUCTIVE & VISUAL INSPECTION —Kilgore, TX
- Urgently hiring
- Basic math
- No experience needed
- High school diploma or GED
- Paid holidays
- Dental insurance
Quick Apply
Automation Technician – 2nd Shift
EnPro Industries —Longview, TX
- Full-time
- 5 years
- Forklift
- High school diploma or GED
Automation Technician/Mechanic
TETRA Technologies Inc —Beckville, TX
- Overtime
- Mechanic experience
- Pass drug screening
- Mid-level
Quick Apply
PLC Programmer
USA Compression —Longview, TX
- Laboratory experience
- Analysis skills
- Travel
Multi-craft Maintenance Technician 1st/2nd Shift – $25.00 - $35.00 an hour depending on experience
Norris Cylinder Company —Longview, TX
- $25 - $35 an hour
- Overtime
- Mid-level
- Ability to climb stairs
- High school diploma or GED
- Disability insurance
- Health insurance
LEVEL II NDE TECHNICIAN
NONDESTRUCTIVE & VISUAL INSPECTION —Kilgore, TX
- Urgently hiring
- Mid-level
- High school diploma or GED
- Driver's License
- Paid holidays
- Dental insurance
Quick Apply
HVAC Engineer
CBRE —Longview, TX
- Full-time
- Microsoft Excel
- Microsoft Outlook
- Mid-level
- Paid holidays
- Health insurance
14d
Maintenance Technician I
AAON —Longview, TX
- Full-time
- Microsoft Excel
- Microsoft Outlook
- Computer literacy
Multi-craft Maintenance Technician 1st/2nd Shift – $25.00 - $35.00 an hour depending on experience
TriMas Corporation —Longview, TX
- $25 - $35 an hour
- Overtime
- Mid-level
- Ability to climb stairs
- High school diploma or GED
- Disability insurance
- Health insurance
Quick Apply

I want to receive the latest job alert for controls technician in henderson, tx

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

Explore jobs in more locations

controls technician jobs near henderson, tx

Multi Craft Maintenance Technician jobs in Longview, TX

Test Technician jobs in Longview, TX

HVAC Technician jobs in Longview, TX

PLC Technician jobs in Texas

Automation Technician jobs in Longview, TX

Maintenance Technician jobs in Longview, TX

Field Service Technician jobs in Texas

Electrical Technician jobs in Longview, TX

Multi Craft Maintenance Technician jobs in California

Ophthalmic Technician jobs in Portland, OR

Industrial Maintenance jobs in York, PA

Aircraft Maintenance Technician jobs in Atlanta, GA

Maintenance jobs in Saint Paul, MN

Multi Craft Maintenance Technician jobs in Vonore, TN

Multi Craft Maintenance Technician jobs in Concord, NC

Multi Craft Maintenance Technician jobs in Columbus, OH

Test Technician jobs in Appleton, WI

Test Technician jobs in Fairfax, VA

No Drug Test Required jobs in Colorado Springs, CO

No Drug Test Required jobs in Boise, ID

Maintenance Technician I/E

Westlake -
Longview, TX

Quick Apply

Job Details

Full-time

Qualifications

High school diploma or GED
E & I

Full Job Description

Westlake offers you the potential to enrich your work life and career experience in an entrepreneurial environment. We work together to enhance peoples' lives through our products and presence in the communities in which we operate.

SUMMARY

Perform electrical and instrumentation-related work assignments for the Maintenance Department based on job requests from the Production Department.

DUTIES AND RESPONSIBILITIES

May include, but are not limited to, the following:

Repair and inspect 480V and below electrical wiring and systems.
Remove and install electrical fuses on 480-volt and below power transmission equipment and motor starter overload devices.
Remove and install air supply solenoids on control valves
Connect/disconnect 480-volt starters, electrical wire to terminals on pumps, motor-operated valves, light fixtures, and wall switches.
Perform loop checks for process field instrumentation.
Locate and correct electrical problems on equipment such as actuator valves, solenoids, electrical control circuits, and control panels.
Take amp readings for electrical motors and high/low voltage power supplies to equipment.
Remove, calibrate, and install transmitters such as pressure, flow, temperature, level, and other instrumentation.
Perform calibration of instruments such as emergency shutdown valves, process control valves, etc.
Remove and install electrical breakers, relays, etc.
Make voltage tests on instrumentation such as transmitters and controllers.
Perform preventative maintenance inspections on electrical systems and equipment.
Disassemble repairs and reassemble automatic valve actuators.
Locate and correct problems with instrumentation such as DCS, panel switches, control valves, transmitters, etc.
Remove, install, and replace electrical lighting and fixtures.
Order supplies, spare parts, and material from the Warehouse via SAP.
Make splices to electrical wiring such as feeder cables, motor leads, control wires, etc.
Must be willing to assist in the training of others.
Be able to read and understand electrical drawings and schematics.
Have a general understanding of motor controls.
Understand the basics of process instrumentation.
Perform any other tasks as requested by supervision.
Perform duties in a manner that protects personal safety as well as the safety of all personnel on site. Whenever appropriate, promptly report Safety, Health or Environmental incidents or issues to management so the situation can be corrected. Attend Monthly Safety Meetings to help prevent off site and job accidents.

EDUCATION, EXPERIENCE AND QUALIFICATIONS

High School diploma or the equivalent.
Five years minimum field experience in Instrument/Electrical Field in the petrochemical industry.
Two-year college degree/approved apprenticeship strongly preferred.
Must be willing to work overtime, shift schedules, and assist other craft disciplines in performing a repair task.

PHYSICAL DEMANDS

This job is performed mainly in a control room or office setting; physical presence is required. While performing the duties of this job, the employee is frequently required to sit; stand; walk; have full use and range of motion of arms, hands, and fingers to reach, grasp, hold, push or pull, twist, and work with tools; and talk or hear. The employee is occasionally required to perform tasks that may require bending, stooping, kneeling, crouching, lying down, or working from elevated platforms. The employee must be able to move safely over uneven terrain or in confined spaces. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. The employee must be able to see details of objects that are more/less than a few feet away; see differences between colors, shades, and brightness, and determine the distance between objects. This job requires a response to audible emergency alarms inside the plant. Employees must be able to evacuate when required.

WORK ENVIRONMENT

The employee must be able to work in a normal factory environment, including enclosed spaces and exposure to various hazards. The noise level in the work environment is usually moderate, as normally based in an office. Some of the work may be required in the operating units, which can require usage of required PPE, including safety glasses, hearing protection, flame-retardant clothing, etc. May also result in exposure to outside elements and may require usage of stairs and elevators. Travel, including air travel or auto travel, may occasionally be required.

Westlake is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to any characteristics protected by applicable legislation.

If you are an active Westlake employee (or an employee of any Westlake affiliates), please do not apply here. You will apply via the Jobs Hub application in Workday.

Quick Apply

Refine Your Search

controls technician jobs in henderson, tx

Maintenance Technician I/E

Product Test Technician

Engineering Technician/Senior Engineering Technician- 2nd Shift

Engineering Technician/Senior Engineering Technician

Quality Assurance Tech-2nd shift

Lead PLC Control Technician

Field Service Technician II – Commercial Kitchen & Laundry Equipment

Field Service Technician

Multi-Craft Maintenance Technician

Quality Asurance Technician (All Shifts)

Electrical Technician

ASSISTANT NDE TECHNICIAN

Automation Technician – 2nd Shift

Automation Technician/Mechanic

PLC Programmer

Multi-craft Maintenance Technician 1st/2nd Shift – $25.00 - $35.00 an hour depending on experience

LEVEL II NDE TECHNICIAN

HVAC Engineer

Maintenance Technician I

Multi-craft Maintenance Technician 1st/2nd Shift – $25.00 - $35.00 an hour depending on experience

I want to receive the latest job alert for controls technician in henderson, tx

Related Searches

Explore jobs in more locations

Job Seeker Tools

Employer Tools

Browse

Stay Connected