Top 15 injection mold technician Jobs in riverside, ca

Senior Molding Technician
Mission Rubber Co —Riverside, CA
- $32 - $35 an hour
- Full-time
- Background check
- Spanish
- 7 years
- Health savings account
- Health insurance
Quick Apply
7d
Blow Mold Technician (3rd shift)
VPET USA LLC —Fontana, CA
- Overnight shift
- Mid-level
- High school diploma or GED
- Continuous improvement
- Health savings account
- Paid holidays
Quick Apply
Process Technician (2nd Shift)
Viant Medical —Upland, CA
- $28 - $33 an hour
- Overtime
- 18 years or older
- No experience needed
- Mid-level
- Paid holidays
- Health insurance
Quick Apply
INJECTION MOLDING PROCESS TECHNICIAN
Syntech Development and Manufacturing Inc. —Chino, CA
- $28 - $32 an hour
- Full-time
- In-person
- Entry level
- Health insurance
- Dental insurance
Quick Apply
Plastic Injection Mold Texturing Technician
PACIFIC TEXTURING AND LASER INC —Riverside, CA
- $50,000 a year
- Full-time
- In person
- Communication skills
- Entry level
- Paid time off
Quick Apply
Process Technician I (2nd Shift 3:00pm-11:30pm)
Comar —Rancho Cucamonga, CA
- $20.07 an hour
- Overtime
- Computer literacy
- High school diploma or GED
- Trade school
- Health insurance
- Dental insurance
Quick Apply
Production Operator, 2nd Shift (Plastics Injection Molding)
Balda C Brewer —Ontario, CA
- $17 - $18 an hour
- Full-time
- Customer service
- Basic math
- High school diploma or GED
Injection Molding Operator (2nd Shift)
Balda C Brewer —Ontario, CA
- $16.90 - $18.00 an hour
- Full-time
- Customer service
- Basic math
- High school diploma or GED
Production Operator Night 3rd Shift
Balda C Brewer —Ontario, CA
- $16.90 - $18.00 an hour
- Full-time
- Customer service
- Basic math
- High school diploma or GED
Production Operator, 1st Shift (Plastics Injection Molding)
Balda C Brewer —Ontario, CA
- $17 - $18 an hour
- Full-time
- Customer service
- Basic math
- High school diploma or GED
Production Operator, 3rd Shift (Plastics Injection Molding)
Balda C Brewer —Ontario, CA
- $17 - $18 an hour
- Full-time
- Customer service
- Basic math
- High school diploma or GED
Injection Molding Operator (3rd Shift)
Balda C Brewer —Ontario, CA
- $16.90 - $18.00 an hour
- Full-time
- Customer service
- Basic math
- High school diploma or GED

Related jobs to explore

Based on your search for injection mold technician

Experienced Water Restoration Technician
Livewell Restoration —Corona, CA
Valid Driver's License and clean driving record. Willingness to do physical labor and work with power tools. Residential construction: 2 years (Required).
$20 - $25 an hour
Quick Apply
Senior Molding Technician
Mission Rubber Co —Riverside, CA
*Continuous Improvement:* Partner with the Plant Manager, engineering, and setup crews to utilize *Lean Manufacturing tools* to reduce setup times (SMED),…
$32 - $35 an hour
Quick Apply
7d

Show more related jobs

Explore jobs in cities nearby

Check out jobs in cities near your current location, Columbus

INJECTION MOLDING MAINTENANCE TECH III - 1ST & 2ND SHIFT
Stanley Electric U.S. —London, OH
Our London, Ohio facility houses lighting and mold design, construction, production engineering, and dedicated associates in our Quality, Assembly, Sales, and…
$35.27 an hour
Quick Apply
Process Technician – Injection Molding
Axium Packaging —New Albany, OH
Ability to read blueprints, process sheets, and technical documentation. High school diploma or GED required; technical degree preferred.
$25 - $28 an hour
Quick Apply

Show more jobs in cities nearby

I want to receive the latest job alert for injection mold technician in riverside, ca

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

Explore jobs in more locations

injection mold technician jobs near riverside, ca

Senior Engineering Technician jobs in Riverside, CA

Production Operator jobs in Ontario, CA

Process Technician jobs in Upland, CA

Senior Administrative Assistant jobs in New York, Ny

Senior Engineering Technician jobs in Lakeland, Fl

Engineering jobs in Gainesville, Ga

Senior Engineering Technician jobs in Charlotte, Nc

Senior Program Manager jobs in Remote

Senior Engineering Technician jobs in Columbia, Mo

Local Owner Operator jobs in Dallas, Tx

Injection Mold Operator jobs in North Vernon, In

Injection Mold Operator jobs in Orion, Mi

Heavy Equipment Operator Union jobs in Georgia

Injection Mold Operator jobs in Seattle, Wa

Owner Operator jobs in Seattle, Wa

Injection Mold Operator jobs in Green Lane, Pa

Blow Moulding Technician jobs in Houston, Tx

Field Service Technician jobs in Miami, Fl

Ophthalmic Technician jobs in South Carolina

Blow Moulding Technician jobs in Salt Lake City, Ut

Senior Molding Technician

Mission Rubber Co
Riverside, CA

Quick Apply

Job Details

Full-time
$32 - $35 an hour
7 days ago

Benefits

Health savings account
Health insurance
Dental insurance
Flexible spending account
Paid time off
Vision insurance
401(k) matching
Life insurance

Qualifications

Polymers experience in materials engineering
Spanish
Operational analysis
Manufacturing management
Defect resolution root cause analysis
Drying (manufacturing process)
Injection (injection molding)
English
Managing manufacturing teams
Crew management
Hydraulics
Quality improvement programs in engineering
Process management
Technical Proficiency
Implementing lean manufacturing processes
Failure analysis

Full Job Description

Position Overview

We are seeking a highly skilled, technically rigorous Senior Molding Technician to lead our injection molding floor operations. This role combines advanced technical expertise in scientific molding with floor leadership. The Senior Molding Technician directs the setup and processing crews, systematic troubleshooting of process drift, and coordinates cross-departmentally with Tooling, Quality, and Maintenance to maximize OEE and minimize scrap.

Key Responsibilities

Production Floor Leadership & Execution

· Crew Direction: Direct and mentor mold set up technicians, material handlers, and operators to ensure tool changes and production runs are executed efficiently with minimal downtime.

· Schedule Execution: Execute the daily production schedule in coordination with Production Planning; proactively communicate deviations, capacity constraints, or material bottlenecks to appropriate personnel.

· Personnel & Compliance: Coordinate with HR and the Plant Manager to ensure floor personnel issues are addressed promptly and a safe, productive work environment is maintained.

Process Engineering & Troubleshooting

· Process Optimization: Troubleshoot and correct complex molding process issues to ensure parts are produced to blueprint specifications within targeted cycle times.

· Process Monitoring: Continuously monitor production parameters against the established Master Process Card to eliminate process drift, minimize scrap rates, and prevent out-of-specification runs.

· Continuous Improvement: Partner with the Plant Manager, engineering, and setup crews to utilize Lean Manufacturing tools to reduce setup times (SMED), optimize cycles, and improve overall plant efficiency.

Cross-Functional Coordination

· Quality Control: Coordinate directly with Quality Control on non-conforming or out-of-specification parts; ensure all process corrections, deviations, and root causes are strictly documented.

· Tooling Department: Identify, document, and tag mold maintenance issues or damage; collaborate with the toolroom on engineering changes and potential tool design improvements.

· Equipment Maintenance: Notify the Maintenance Department of press or auxiliary equipment malfunctions and support the execution of the machinery's Preventative Maintenance (PM) program.

· Program Management: Coordinate with Program Managers to report, verify, and correct part documentation, bill of materials (BOM), or routing issues.

· Special Projects: Support auxiliary engineering projects, including new tool sampling (FAT/SAT), raw material trials, and product development runs.

Job Qualifications & Requirements

Required:

· Experience: 7+ years of hands-on technical experience in a production injection molding environment, with demonstrated experience directing setup crews and floor personnel.

· Language: Bilingual fluency in spoken English and Spanish is required to effectively direct floor staff and communicate across departments.

· Technical Aptitude: Mastery of Scientific Molding / Decoupled Molding principles, machine control interfaces, and the relationship between hydraulic/electric press parameters and polymer behavior.

· Material Expertise: Proven track record processing a wide variety of thermoplastics, with deep, specialized experience handling elastomeric compounds (TPE, TPU, etc.), including their unique drying, shear sensitivity, and shrinkage traits.

· Lean Manufacturing: Practical experience applying Lean principles (5S, root-cause analysis, SMED) on the production floor.

Preferred:

· ISO Compliance: Experience working within and maintaining audited ISO 9001 (or equivalent) quality management system processes and documentation procedures.

Here is the same thing in bullet point form in case this fits better:

Key attributes needed for this position are:

· Directs mold set-up technician, material handlers, and other production personnel to ensure jobs are set-up efficiently using the correct materials and parameters with minimal downtime/scrap.

· Troubleshoots and corrects molding process issues to ensure parts are run to specification and within the targeted cycle times.

· Monitors production processes to minimize scrap and correct out of specification molding parameters.

· Works with Plant Manager and set-up crew to improve overall efficiency of set-up and molding processes.

· Coordinates with Quality Control on out-of-specific parts to ensure issues are documents and corrections notated.

· Coordinate with Tooling Department on flagging mold maintenance issues and/or potential improvements.

· Coordinates with Program Manager to report and correct part documentation issues.

· Coordinates with Maintenance Department on equipment issues and supports in Preventative Maintenance program.

· Coordinates with Production Planning in executing production schedule and notifies appropriate personnel of deviations when needed.

· Executes production schedule in an efficient manner while maintaining a clean and productive work environment.

· Assists with production, material handling, tooling, equipment, and/or product development projects.

· Coordinate with HR to ensure all personnel issues are addressed in a timely manner.

· Experience working with and maintaining Standard Operating Procedures, 5S and root-cause analysis procedures.

Must have:

· Years of Experience: Minimum 7+ years of hands-on experience running machines in an injection molding production environment.

· Material Expertise: Proven track record running a wide variety of plastics, with specific, deep experience processing elastomeric compounds.

· Technical Aptitude: Advanced understanding of injection molding physics, scientific molding principles, machine controls, and hydraulic/electric press parameters.

· Leadership: Demonstrated senior-level experience managing technical floor staff (Techs, Handlers, Set-up crews).

· Lean Manufacturing Experience:

· Bilingual: Fluency in spoken English and Spanish is required.

Pay: $32.00 - $35.00 per hour

Benefits:

401(k) matching
Dental insurance
Flexible spending account
Health insurance
Health savings account
Life insurance
Paid time off
Vision insurance

Experience:

Senior or lead molding tech: 7 years (Required)

Language:

English and Spanish (Required)

Work Location: In person

Quick Apply

Refine Your Search

injection mold technician jobs in riverside, ca

Senior Molding Technician

Blow Mold Technician (3rd shift)

Process Technician (2nd Shift)

INJECTION MOLDING PROCESS TECHNICIAN

Plastic Injection Mold Texturing Technician

Process Technician I (2nd Shift 3:00pm-11:30pm)

Production Operator, 2nd Shift (Plastics Injection Molding)

Injection Molding Operator (2nd Shift)

Production Operator Night 3rd Shift

Production Operator, 1st Shift (Plastics Injection Molding)

Production Operator, 3rd Shift (Plastics Injection Molding)

Injection Molding Operator (3rd Shift)

Related jobs to explore

Explore jobs in cities nearby

I want to receive the latest job alert for injection mold technician in riverside, ca

Explore jobs in more locations

Job Seeker Tools

Employer Tools

Browse

Stay Connected