Top 177 cnc operator Jobs in saint paul mn

CNC Machining Center Manager
Lapham-Hickey Steel —Saint Paul, MN
- $75,000 - $85,000 an hour
- Full-time
- 5 years
- Continuous improvement
- Mentoring
- Health savings account
- Paid holidays
Quick Apply
CNC Swiss Lathe/ Lathe Setup Operator- 2nd shift
Mack Engineering Corp —Minneapolis, MN
- $23.00 - $34.33 an hour
- Overtime
- 11+ years
- Mid-level
- Experience equivalent to degree accepted
- Health insurance
- Dental insurance
Quick Apply
7d
CNC Press Brake Operator
Lapham-Hickey Steel —Little Canada, MN
- $24 - $30 an hour
- Full-time
- Mid-level
- Forklift
- Ability to lift 50 pounds
- Health savings account
- Health insurance
Quick Apply
7h
CNC Swiss Machining – All Levels (Operator | Setup | Programmer)
Diag Partners Flex —Lino Lakes, MN
- $25 - $40 an hour
- Full-time
- Software troubleshooting
- Mid-level
- Mentoring
Quick Apply
2d
1st Shift CNC Programming Machinist/CNC Operators Needed!
PrideStaff —Minneapolis, MN
- $24.89 - $40.00 an hour
- Full-time
- Software troubleshooting
- Mid-level
- Forklift
- Health insurance
- Dental insurance
Quick Apply
CNC Mill Operator
ShopSabre —Lakeville, MN
- $20 - $27 an hour
- Full-time
- Mid-level
- US work authorization
- Trade school
- Paid training
- Health savings account
Quick Apply
CNC Machinist
Wagner Spray Tech —Plymouth, MN
- $25 - $32 an hour
- Extended hours
- Microsoft Outlook
- Basic math
- Mid-level
- Profit sharing
- Wellness program
Quick Apply
9h
CNC Machine Operator 1 - Weekend Shift AM
C-Axis Inc —Hamel, MN
- From $24 an hour
- Full-time
- US work authorization
- In-person
- Manufacturing
- Health insurance
- Dental insurance
Quick Apply
CNC Horizontal Mill Machine Operators-Night Shift
ARUNDEL MACHINE —Crystal, MN
- $22.00 - $32.20 an hour
- Full-time
- High school diploma or GED
- Ability to sit for extended periods
- 1 year
- AD&D insurance
- Paid holidays
2d
CNC Vertical Mill Machine Operators-Night Shift
ARUNDEL MACHINE —Crystal, MN
- $22.00 - $32.20 an hour
- Full-time
- Mid-level
- High school diploma or GED
- Ability to sit for extended periods
- AD&D insurance
- Paid holidays
2d
EXPERIENCED Springs Coiling Operator
Activar —Forest Lake, MN
- $24 - $29 an hour
- Overtime
- Background check
- Mid-level
- Windows
- Health savings account
- AD&D insurance
Quick Apply
CNC Horizontal Mill Machine Operators-Day Shift
ARUNDEL MACHINE —Crystal, MN
- $22 - $28 an hour
- Full-time
- High school diploma or GED
- Ability to sit for extended periods
- 1 year
- AD&D insurance
- Paid holidays
2d
Swiss Machinist
Randstad —Saint Paul, MN
- $50,000 - $70,000 a year
- CAD
- Mid-level
- No degree
- AD&D insurance
- Disability insurance
Quick Apply
6h
CNC Horizontal Mill Machine Operators-Weekend Day Shift
ARUNDEL MACHINE —Crystal, MN
- $22.00 - $32.20 an hour
- Full-time
- High school diploma or GED
- Ability to sit for extended periods
- 1 year
- AD&D insurance
- Paid holidays
2d
CNC Lathe Machine Operators-Weekend Day Shift
ARUNDEL MACHINE —Crystal, MN
- $22.00 - $32.20 an hour
- Full-time
- High school diploma or GED
- Ability to sit for extended periods
- 1 year
- AD&D insurance
- Paid holidays
2d
CNC Swiss Machinist
Nycor Technical —Minneapolis, MN
- $28 - $36 an hour
- Full-time
- 5 years
- Quality control
- In-person
- Health insurance
- Dental insurance
Quick Apply
5d
CNC Mills Machinist
Twin City Staffing —Blaine, MN
- $23 - $45 an hour
- Full-time
- Background check
- Mid-level
- High school diploma or GED
- Health savings account
- Health insurance
Quick Apply
7d
Swiss Turning Machinist
Twin City Staffing —Blaine, MN
- $23 - $45 an hour
- Full-time
- Background check
- 5 years
- Mid-level
- Health savings account
- Health insurance
Quick Apply
7d
CNC Machine Operator
Twin City Staffing —Saint Paul, MN
- $20 - $24 an hour
- Full-time
- Background check
- Mid-level
- Math
- Disability insurance
- Health insurance
Quick Apply
12d
CNC Operator and Programmer
Twin City Staffing —Blaine, MN
- $30 - $36 an hour
- Full-time
- Background check
- Mid-level
- 3 years
- Paid holidays
- Health insurance
Quick Apply
7d

I want to receive the latest job alert for cnc operator in saint paul mn

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

CNC Machining Center Manager

Lapham-Hickey Steel -
Saint Paul, MN

Quick Apply

Job Details

Full-time
$75,000 - $85,000 an hour

Benefits

Health savings account
Paid holidays
Health insurance
Dental insurance
401(k)
Tuition reimbursement
Paid time off
Employee assistance program
Vision insurance
401(k) matching
Safety equipment provided
Life insurance
Referral program

Qualifications

Mechanical blueprint interpretation
Manufacturing management
Team leadership
Aluminum
Quality management
CAM software
CNC milling machine
Manufacturing facility
Parts drawings
Continuous improvement
CNC G-code Programming
Leading team collaboration initiatives
Managing manufacturing teams
Milling machines
Cutting machines
Leadership
Manufacturing company experience
Mechanical troubleshooting
CAM programming

Full Job Description

Position Overview

We are seeking a skilled and experienced CNC Machining Center Manager to oversee the operation of eight CNC machining centers — four Fadal and four Haas vertical milling machines — within our steel manufacturing facility. This position plays a critical role in producing precision-machined steel components that meet strict metallurgical, dimensional, and surface finish specifications. The ideal candidate combines deep machining expertise with the leadership ability to drive production performance, quality compliance, and team development in a demanding steel environment.

Key ResponsibilitiesMachine Operations & Production

Direct the daily setup, operation, and scheduling of four Fadal and four Haas CNC machining centers to meet steel component production targets
Manage job sequencing and machine loading to maximize uptime and throughput across all eight machines
Oversee tooling selection, carbide insert management, and cutting parameter optimization for machining hardened and structural steel grades including A36, 4140, 4340, D2, and H13
Monitor cycle times, tool wear, and chip load to maintain efficiency and protect machine spindles from premature wear in high-hardness steel cuts
Coordinate fixture and work holding setups appropriate for steel stock, including vises, tombstones, and custom fixturing for complex geometries

Quality & Compliance

Ensure all machined steel components meet dimensional tolerances per engineering drawings and GD&T callouts
Enforce in-process inspection protocols including CMM checks, surface roughness measurement, and hardness verification where required
Lead first-article inspection (FAI) activities and maintain PPAP documentation for new steel component programs
Maintain compliance with internal quality management systems (ISO 9001 or IATF 16949 as applicable) and customer-specific requirements
Manage non-conformance reports (NCRs), root cause analysis, and corrective actions related to machining defects

Team Leadership & Safety

Supervise, train, and mentor CNC machine operators on Fadal and Haas controls, safe steel machining practices, and shop procedures
Conduct daily toolbox talks and enforce all PPE requirements, including face shields, steel-toed boots, and chip guard protocols specific to steel machining
Perform or coordinate performance reviews, schedule adherence tracking, and workforce planning across shifts
Foster a culture of accountability, continuous improvement, and safe work practices

Maintenance & Equipment

Coordinate with maintenance personnel on preventive maintenance schedules for all eight machining centers to minimize unplanned downtime
Troubleshoot machine alarms, axis faults, coolant system issues, and spindle performance problems on Fadal and Haas platforms
Manage coolant concentration, filtration, and disposal in compliance with environmental regulations applicable to steel machining operations
Maintain accurate machine logs, downtime records, and maintenance work orders in the CMMS system

Continuous Improvement

Identify and lead Kaizen and Lean initiatives to reduce cycle times, scrap rates, and setup times on steel machining operations
Collaborate with process engineers and programmers to optimize G-code programs for steel-specific cutting strategies
Track and report KPIs including OEE, scrap percentage, on-time delivery, and cost per part to plant leadership

Qualifications Required

5+ years of hands-on CNC machining experience, with significant time spent machining carbon steel, alloy steel, or tool steel
Direct operating experience on both Fadal (legacy controls) and Haas CNC controls
Proficiency in G-code and M-code programming; ability to edit programs at the machine control
Strong ability to read and interpret engineering drawings, GD&T, and material specifications for steel components
Demonstrated leadership or management experience in a production machining environment
Working knowledge of tooling and cutting parameters for ferrous metals, including appropriate speeds, feeds, and coolant strategies

Preferred

Associate's degree or technical certification in Machining Technology, Manufacturing Engineering, or a related field — or equivalent hands-on experience
Familiarity with ISO 9001, IATF 16949, or AS9100 quality management systems
Experience with ERP or MES systems for production tracking and material traceability
Exposure to steel heat treatment processes and how they affect machinability (annealing, hardening, stress relieving)
OSHA 10 or OSHA 30 General Industry certification

Work Environment

This is a full-time, on-site position based in our steel manufacturing facility. The work environment includes exposure to metal chips, cutting fluids, coolant mist, and elevated noise levels typical of CNC machining operations. Candidates must be comfortable standing for extended periods on a concrete shop floor and working in close proximity to operating machinery. Steel-toed boots, safety glasses, and hearing protection are required at all times on the shop floor. Shift flexibility may be required during peak production periods or to cover second-shift operations.

Compensation & Benefits

Compensation is competitive and commensurate with experience. Our benefits package includes:

Competitive salary with performance-based incentive pay
Medical, dental, and vision insurance
401(k) with company match
Paid time off and company holidays
Tuition reimbursement for job-related technical education
Tool allowance and PPE provided

Pay: $75,000.00 - $85,000.00 per hour

Benefits:

401(k)
401(k) matching
Dental insurance
Employee assistance program
Health insurance
Health savings account
Life insurance
Paid time off
Referral program
Tuition reimbursement
Vision insurance

Experience:

CNC milling machine: 6 years (Required)
Leadership: 5 years (Required)
CAM programming: 2 years (Required)

Work Location: In person

Quick Apply

Refine Your Search

cnc operator jobs in saint paul mn

CNC Machining Center Manager

CNC Swiss Lathe/ Lathe Setup Operator- 2nd shift

CNC Press Brake Operator

CNC Swiss Machining – All Levels (Operator | Setup | Programmer)

1st Shift CNC Programming Machinist/CNC Operators Needed!

CNC Mill Operator

CNC Machinist

CNC Machine Operator 1 - Weekend Shift AM

CNC Horizontal Mill Machine Operators-Night Shift

CNC Vertical Mill Machine Operators-Night Shift

EXPERIENCED Springs Coiling Operator

CNC Horizontal Mill Machine Operators-Day Shift

Swiss Machinist

CNC Horizontal Mill Machine Operators-Weekend Day Shift

CNC Lathe Machine Operators-Weekend Day Shift

CNC Swiss Machinist

CNC Mills Machinist

Swiss Turning Machinist

CNC Machine Operator

CNC Operator and Programmer

I want to receive the latest job alert for cnc operator in saint paul mn

Explore jobs in more locations

Job Seeker Tools

Employer Tools

Browse

Stay Connected