Top 24 Cnc programmer Jobs in Monroe, Wa

CNC Programmer
Integrated Technologies, Inc —Everett, WA
- $35 - $42 an hour
- Full-time
- Background check
- 5 years
- Computer literacy
- Health insurance
- Dental insurance
Quick Apply
8d
Numerical Control Programmer 3
The Structures Company, LLC —Everett, WA
- $61.75 an hour
- Contract
- Mid-level
- 1 year
- Associate's degree
- Health insurance
- Dental insurance
Quick Apply
Numerical Control Programmer 3
The Structures Company, LLC —Everett, WA
- $61.75 an hour
- Contract
- Engineering
- Mid-level
- Analysis skills
- Health insurance
- Dental insurance
Quick Apply
Numerical Control Programmer 5
The Structures Company, LLC —Everett, WA
- $87 an hour
- Contract
- Continuous improvement
- Mentoring
- Senior level
- Health insurance
- Dental insurance
Quick Apply
CNC Programmer - Damar
Zenix Aerospace Inc —Monroe, WA
- $35.25 - $51.00 an hour
- Full-time
- 5 years
- Basic math
- Mid-level
- Health savings account
- Paid holidays
5d
CNC Programmer
Karman Space & Defense —Mukilteo, WA
- $82,000 - $130,000 a year
- Full-time
- Continuous improvement
- Mentoring
- Computer skills
- Health savings account
- AD&D insurance
Development CNC Programmer, Leo
Amazon Kuiper Manufacturing Enterprises LLC —Redmond, WA
- $99,400 - $160,000 a year
- Full-time
- Senior level
- 2 years
- AD&D insurance
- Health insurance
12d
Numerical Control Programmer 3 (contract)
Boeing —Everett, WA
- $54 - $59 an hour
- Contract
- Mid-level
- 3 years
- Continuous improvement
- Health insurance
- Dental insurance
CNC Programmer
Wipro Givon USA —Everett, WA
- $30 - $42 an hour
- Full-time
- Mid-level
- Manufacturing
- Paid holidays
- Dental insurance
Quick Apply
NC PROGRAMMER 2
ROYELL MANUFACTURING INC. —Everett, WA
- $40 - $45 an hour
- Full-time
- Ability to walk for extended periods
- Mid-level
- Office
- AD&D insurance
- Health insurance
Quick Apply
CNC Router Operator - Programmer
Safran —Everett, WA
- $47,570 - $74,760 a year
- Full-time
- 18 years or older
- High school
- Writing skills
CNC Set-Up/Programmer III
Cadrex Mukilteo —Mukilteo, WA
- $51 - $70 an hour
- Full-time
- 5 years
- Continuous improvement
- Quality control
- Paid holidays
- Disability insurance
CNC Programmer - Aerospace and Defense
Jemco Components & Fabrication, Inc. —Kirkland, WA
- 8 hour shift
- English
- Mid-level
- Ability to lift 50 pounds
Quick Apply
Numerical Control Programmer 5 (contract)
Boeing —Everett, WA
- $80 - $85 an hour
- Contract
- Continuous improvement
- Mentoring
- Fair chance
- Health insurance
- Dental insurance
CNC Machinist/Programmer - Redmond, WA
Golfco International, Inc. —Redmond, WA
- $40 - $55 an hour
- Temporary
- English
- US work authorization
- In-person
- Paid time off
Quick Apply
13d
CNC Machinist/Programmer
Manay CPA —Redmond, WA
- Full-time
- 5 years
- Continuous improvement
- Senior level
- Health insurance
- Dental insurance
Quick Apply

Discover related jobs

Based on your search for cnc programmer jobs.

CNC Machinist — Programming, Setup & Operation (Experienced)
Washington Machine Works —Seattle, WA
5+ years as a CNC machinist doing your own programming and setups, not just running someone else's. Inspect your own (and others') work — mics, indicators,…
$40 - $55 an hour
Quick Apply
8d
CNC Programmer
Integrated Technologies, Inc —Everett, WA
Have the necessary verbal communication skills, functional and technical Skills, be familiar with most type of machine controls/instrumentation knowledge, and…
$35 - $42 an hour
Quick Apply
8d

Show more related jobs

Explore jobs in cities nearby

Check out jobs in cities near your current location, Columbus

CMM Programmer
Advance CNC —Grove City, OH
We’re looking for a CMM Programmer with the aptitude, willingness, and proactivity to excel in a fast-paced and growing manufacturing environment.
$90,000 a year
Quick Apply
9d
CNC Programmer
Nesco Resource, LLC —Columbus, OH
Interpret engineering drawings, blueprints, and 3D models. You'll work with advanced sheet metal fabrication equipment, programming Salvagnini lasers, punches,…
$70,000 - $80,000 a year
Quick Apply

Show more jobs in cities nearby

I want to receive the latest job alert for cnc programmer in monroe, wa

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

CNC Programmer

Integrated Technologies, Inc -
Everett, WA

Quick Apply

Job Details

Full-time
$35 - $42 an hour
8 days ago

Benefits

Health insurance
Dental insurance
401(k)
Paid time off
Vision insurance
401(k) matching
Safety equipment provided
Life insurance

Qualifications

CNC programming
Some college
Computer operation
Machine setup
Equipment setup (production tasks)
Mechanical design
Machining tool setup
High school diploma or GED
CAM software
CNC G-code Programming
3D modeling

Full Job Description

Summary:

Responsible for producing machined aircraft/aerospace parts and components by programming, setting up, and operating a computer numerical control (CNC) machine; maintaining quality and safety standards; keeping records; maintaining equipment and supplies. Assists in the design and modeling of tools in support of machining and qualification processes.

Essential Duties and Responsibilities:

· Plans machining by studying work orders, blueprints, engineering plans, materials, specifications, orthographic drawings, reference planes, locations of surfaces, and machining parameters; interpreting geometric dimensions and tolerances (GD&T). Understanding 'Close Tolerance' work.

· Programs mills and or lathes by entering instructions, including zero and reference points; setting tool registers, offsets, calculating requirements, including basic math, geometry, and trigonometry; proving part programs.

· Creates NC programs from the 3D models for manufacturing the designed tools.

· Prepares geometric layout using computer-assisted drafting software to show location of reference points and direction of cutting paths.

· Compares encoded printout with original program sheet to assure accuracy of machine instructions.

· Revises program to eliminate instruction errors or omissions.

· Sets-up mills and lathes by installing and adjusting three and four jaw chucks, tools, attachments, collets, bushings, cams, gears, stops, and stock pushers; indicating fixtures, tools and parts.

· Loads feed mechanism/machining table by lifting stock into position.

· Verifies settings by measuring positions, first-run part, and sample work pieces; adhering to international standards. Inspection of completed parts as machine runs.

· Maintains specifications by observing drilling, grooving, and cutting, including turning, facing, knurling and thread chasing operations; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes.

· Maintains safe operations by adhering to safety procedures and regulations.

· Maintains equipment by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs.

· Maintains continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs.

· Documents actions by completing production, quality logs and shop traveler (planning).

Qualifications:

· Competent and capable to read and interpret Blue Prints, have strong conceptual skills, be open minded and supportive to Continuous Process Improvement.

· Have the necessary verbal communication skills, functional and technical Skills, be familiar with most type of machine controls/instrumentation knowledge, and understand that creating and building own tooling is mandatory.

· Be attentive to all details, using sound judgment, have been exposed to a working knowledge of composite materials.

· Proven experience with MasterCam required.

· Must be able to do set-ups if required.

SolidWorks, Catia and 5 Axis a Plus!

· In order to comply with U.S. government regulations applicable to this position, all applicants must be either a U.S. citizen, lawful permanent resident of the U.S., as defined in 8 U.S.C. 1101(a)(20) or a “protected individual”, as defined by 8 U.S.C. 1324b(a)(3)

· Offer of employment will be contingent on completion of background check and a drug screening.

· Must be able to work off shifts if needed

Education:

· Minimum Education Required: High School Diploma or graduation from certified technical school. Some college level training in Math and Computer Technology.

· Minimum 5-7 years of related experience.

Computer Skills:

Proven experience with Microsoft Office, MasterCam. SolidWorks, Catia and 5 Axis a Plus!

Other Skills and Abilities:

· Updates job knowledge by participating in educational opportunities; reading technical publications.

· Accomplishes organizational goals by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments.

Physical Demands:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to stand; walk; and stoop, kneel, or crouch. The employee must regularly lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.

Work Environment:

Normal working conditions in a manufacturing environment. The work environment characteristics described herein are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee will be exposed to hazardous chemicals, information about specific chemicals can be found in the plant MSDS, proper PPE will be provided when handling hazardous items. The employee is occasionally exposed to moving mechanical parts. The noise level in the work environment is usually moderate.

Wage/Benefits:

This is a full-time, hourly, non-exempt position, with medical, dental, and 401k benefits.

Integrated Technologies, Inc. is an Equal Opportunity Employer

Pay: $35.00 - $42.00 per hour

Benefits:

401(k)
401(k) matching
Dental insurance
Health insurance
Life insurance
Paid time off
Vision insurance

Shift availability:

Day Shift (Preferred)
Night Shift (Preferred)

Ability to Commute:

Everett, WA 98203 (Preferred)

Work Location: In person

Quick Apply

Refine Your Search

cnc programmer jobs in monroe, wa

CNC Programmer

Numerical Control Programmer 3

Numerical Control Programmer 3

Numerical Control Programmer 5

CNC Programmer - Damar

CNC Programmer

Development CNC Programmer, Leo

Numerical Control Programmer 3 (contract)

CNC Programmer

NC PROGRAMMER 2

CNC Router Operator - Programmer

CNC Set-Up/Programmer III

CNC Programmer - Aerospace and Defense

Numerical Control Programmer 5 (contract)

CNC Machinist/Programmer - Redmond, WA

CNC Machinist/Programmer

Discover related jobs

Explore jobs in cities nearby

I want to receive the latest job alert for cnc programmer in monroe, wa

Explore jobs in more locations

Job Seeker Tools

Employer Tools

Browse

Stay Connected